What PS2 size upfront?

[karbonkid]

With me changing a set of CSL rims from Cups to PS2s as I need a set of wets, I did consider a different size up front from the OEM 235/35/19.

I am more strong-minded on running 235 again, but with getting great results from running 265 on a 9J rim for track work I couldn't help but think a wider front maybe worth trying, considered a 245 or even a 255 PS2. TBH I will probably run a 235, but did cross my mind. Anyone run this size with a 265/30/19 at rear? Would appreciate any feedback on thoughts.

Off to the pub... so expect some good comments below time im back.

TIA,

[Bealo]

I run 245/35/19 on the fronts and 275/30/19 on the rears. Ok not PS2's but Falkens without any issues what so ever.

But when i try the PS2's next i will try to get them in the above sizes

[sailorbaz]

Originally Posted by Bealo

I run 245/35/19 on the fronts and 275/30/19 on the rears. Ok not PS2's but Falkens without any issues what so ever.

x2 And thats with 12mm spacers on the front and 5mm on the rear. I do rate the Falkens and about to replace the rears with the same.

[glendog74]

Why not consider running rears on the front axle like others have done in the past? 265/30/19

[shimmy]

Originally Posted by glendog74

Why not consider running rears on the front axle like others have done in the past? 265/30/19

I think with the csl rear offset you can only run on -3 camber unless you roll the arches, and if you do that you get tramlining and huge wear

[glendog74]

The arches are already rolled on a CSL as standard. Is -3deg camber what others like 'houlbt' have ran before?