Rubbing down Carbon Fibre, no no?

Dan · 10-03-2010, 09:09 AM

Just thinking about tarting the little splitters up at the front of the car, they are already looking a bit tired from the odd scratch and stone chip!

I was thinking about rubbing them down to remove the surface blemishes and then re-lacquering them, I have some nice high build stuff at home from my Dad's garage that leaves a lovely deep shine!

What I don't want to do those is fook the splitters up by rubbing the surface down, so long as I only go down to the lacquer it should be ok shouldn't it?

**TMAQ** · 10-03-2010, 10:41 AM

this thread is worth a look Dan

http://www.cslregister.com/forum/sho...ight=splitters

Dan · 10-03-2010, 11:26 AM

Perfect, your a star thanks mate! Will whip them off and run them up Dad's bodyshop this weekend then!

Kev.H · 10-03-2010, 04:59 PM

ive done it takes hoursssssssssssssssssssssss

get hold of gareth from detailedobsession he can get meguiars 3000 grit paper

mine got ruined teaching a brand new boxster s a lesson

Dan · 10-03-2010, 09:01 PM

Quote:

Originally Posted by Kev.H

ive done it takes hoursssssssssssssssssssssss

get hold of gareth from detailedobsession he can get meguiars 3000 grit paper

mine got ruined teaching a brand new boxster s a lesson

Funnily enough I spoke to Gaz earlier mate thanks! Lol

I'll give this a go, it'll be fine just to finish them off a bit better, they'll get beat to hell around track and going to Germany and back anyway!

**TMAQ** · 10-03-2010, 09:19 PM

mine need doing as well but might wait until june

10-03-2010, 09:09 AM	#1
Dan Driving it like I nicked it Join Date: Nov 2009 Posts: 2,058 Casino cash: $6689	Rubbing down Carbon Fibre, no no? Just thinking about tarting the little splitters up at the front of the car, they are already looking a bit tired from the odd scratch and stone chip! I was thinking about rubbing them down to remove the surface blemishes and then re-lacquering them, I have some nice high build stuff at home from my Dad's garage that leaves a lovely deep shine! What I don't want to do those is fook the splitters up by rubbing the surface down, so long as I only go down to the lacquer it should be ok shouldn't it? __________________

10-03-2010, 11:26 AM	#3
Dan Driving it like I nicked it Join Date: Nov 2009 Posts: 2,058 Casino cash: $6689	Perfect, your a star thanks mate! Will whip them off and run them up Dad's bodyshop this weekend then! __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-03-2010, 10:41 AM	#2
TMAQ S5, Sport Off, DSC M-track Join Date: Mar 2009 Location: Surrey Posts: 591 Casino cash: $2203	this thread is worth a look Dan http://www.cslregister.com/forum/sho...ight=splitters

10-03-2010, 04:59 PM	#4
Kev.H S4 - Getting the hang of it Join Date: Jun 2008 Posts: 141 Casino cash: $1296	ive done it takes hoursssssssssssssssssssssss get hold of gareth from detailedobsession he can get meguiars 3000 grit paper mine got ruined teaching a brand new boxster s a lesson

10-03-2010, 09:19 PM	#6
TMAQ S5, Sport Off, DSC M-track Join Date: Mar 2009 Location: Surrey Posts: 591 Casino cash: $2203	mine need doing as well but might wait until june