CSL Register

Go Back   CSL Register > General > Technical Area

Reply
 
Thread Tools Display Modes
Old 27-01-2010, 03:29 PM   #1
danr55
S5 - Full Throttle
 

Join Date: May 2009
Posts: 262
Casino cash: $604
danr55 is on a distinguished road
Default Replacement front and rear discs - OEM fitment

Hi guys

Can anyone recommend if it's only BMW discs that can be used as replacements for OEM CSL fitment, or if there are any other aftermarket alternatives? Any experiences/price comparisons etc on these would be much appreciated

Thanks in advance
danr55 is offline   Reply With Quote
Old 27-01-2010, 04:04 PM   #2
shane@mbtech
CSL Register Uber-poster!
 
shane@mbtech's Avatar
 

Join Date: Feb 2009
Location: warrington
Posts: 5,419
Casino cash: $19783
shane@mbtech is an unknown quantity at this point
Default

Quote:
Originally Posted by danr55 View Post
Hi guys

Can anyone recommend if it's only BMW discs that can be used as replacements for OEM CSL fitment, or if there are any other aftermarket alternatives? Any experiences/price comparisons etc on these would be much appreciated

Thanks in advance

I think pf do some standard size, but the ap 356mm you are thinking of will not fit if my thoughts are correct.

If you are not upgrading calipers, try standard discs/braided hoses/race fluid and pagid race pad.

If not go big brake kit.
shane@mbtech is offline   Reply With Quote
Old 27-01-2010, 04:13 PM   #3
danr55
S5 - Full Throttle
 

Join Date: May 2009
Posts: 262
Casino cash: $604
danr55 is on a distinguished road
Default

Cheers Lawsy

My plan as budget was tight was to go for PF Zrated pads + braided lines which I had delivered last week and decent fluid on the standard discs. Car was with BMW for Inspection 1 last week, and they said the discs were in good condition. Took it somewhere today to have this looked at, and the discs front and rear are absolutely knackered, so didnt fit the new pads and lines yet. Just wondering what options there are (if any) for new discs front and back. I was unsure whether the AP ones would fit as they were bigger, but my ignorance is endless!
danr55 is offline   Reply With Quote
Old 27-01-2010, 07:07 PM   #4
weedavey
S4 - Getting the hang of it
 

Join Date: Nov 2009
Posts: 144
Casino cash: $1842
weedavey is on a distinguished road
Default

Quote:
Originally Posted by danr55 View Post
Cheers Lawsy

My plan as budget was tight was to go for PF Zrated pads + braided lines which I had delivered last week and decent fluid on the standard discs. Car was with BMW for Inspection 1 last week, and they said the discs were in good condition. Took it somewhere today to have this looked at, and the discs front and rear are absolutely knackered, so didnt fit the new pads and lines yet. Just wondering what options there are (if any) for new discs front and back. I was unsure whether the AP ones would fit as they were bigger, but my ignorance is endless!
I think I might be in same boat Dan. Got some "grumbling" when brakes are under load. I too am thinking of going down the new disc, braided lines, pagid pads and Decent fluid road for now, maybe big brakes a little later on.
weedavey is offline   Reply With Quote
Old 27-01-2010, 07:22 PM   #5
danr55
S5 - Full Throttle
 

Join Date: May 2009
Posts: 262
Casino cash: $604
danr55 is on a distinguished road
Default

Quote:
Originally Posted by weedavey View Post
I think I might be in same boat Dan. Got some "grumbling" when brakes are under load. I too am thinking of going down the new disc, braided lines, pagid pads and Decent fluid road for now, maybe big brakes a little later on.
Sounds familiar!
danr55 is offline   Reply With Quote
Old 27-01-2010, 07:31 PM   #6
s.mac
CSL Register Uber-poster!
 

Join Date: Jun 2008
Posts: 4,247
Casino cash: $15600
s.mac is an unknown quantity at this point
Default

stick with standard disks

PF dont do a CSL front size disk (just the smaller M3 front disk), there are other options but the disks are heavier than OEM so unless you go BBK stick with OEM IMHO
s.mac is offline   Reply With Quote
Old 27-01-2010, 08:22 PM   #7
shane@mbtech
CSL Register Uber-poster!
 
shane@mbtech's Avatar
 

Join Date: Feb 2009
Location: warrington
Posts: 5,419
Casino cash: $19783
shane@mbtech is an unknown quantity at this point
Default

Quote:
Originally Posted by weedavey View Post
I think I might be in same boat Dan. Got some "grumbling" when brakes are under load. I too am thinking of going down the new disc, braided lines, pagid pads and Decent fluid road for now, maybe big brakes a little later on.

Thats because you drive it like a pussy,
give it some spirited driving for 15 minutes with heavy braking thrown in, then see if your brakes are still rumbling.

Sounds just like pad deposit build up
shane@mbtech is offline   Reply With Quote
Old 27-01-2010, 08:45 PM   #8
s.mac
CSL Register Uber-poster!
 

Join Date: Jun 2008
Posts: 4,247
Casino cash: $15600
s.mac is an unknown quantity at this point
Default

Quote:
I've heard Pagid do a replacement front
I may be wrong but I dont think they do

I think the Z4M has the same size front disk so you may be able to find one if you ask for Z4M replacement

Quote:
and someone suggested there was another make for the rear (not sure which)
the rear disk is the same size as the M3 so there are a few options
s.mac is offline   Reply With Quote
Old 27-01-2010, 08:57 PM   #9
weedavey
S4 - Getting the hang of it
 

Join Date: Nov 2009
Posts: 144
Casino cash: $1842
weedavey is on a distinguished road
Default

Quote:
Originally Posted by lawsy View Post
Thats because you drive it like a pussy,
give it some spirited driving for 15 minutes with heavy braking thrown in, then see if your brakes are still rumbling.

Sounds just like pad deposit build up


Done it......got worse...... slight judder through the wheel when heated up. All temps the same when checked after the drive... somethings going on with them.
Going to get them looked at next week. They going to take wheels off drill the holes out in the disks to get rid of what build up there is in them (not much) and general visual of underside.
weedavey is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:27 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c)www.wickedwifi.co.uk