Pagid ref numbers for AP and standard rears

**TMAQ** · 08-12-2009, 04:11 PM

In the process of changing my pads all-round and replacing my front AP discs with PF ones (PF discs ref# 356.32.0054.03/04). I have a standard setup on the rear and have the AP kit on the front, the AP kit I have is CP5575-1004.

Been shopping around for decent prices, however need a hand to clarify a few things…

what is the pagid ref number for this AP kit, E1903 I think? The AP website references CP5070D54 for pads but a few companys I have emailed say Pagid don’t exist for the AP kit I have

, even though I have Pagid on there at the moment and a fair few of you guys do. The companys that do the pagid, dont do the rs14s.

Regarding the new PF discs, 99% certain they should mount the AP bell’s I currently have?

The Pagid pad reference for the standard rears, E2685?

thanks

**glendog74** · 08-12-2009, 04:34 PM

I have a set of Pagid RS29s (for APs) at home in their box so could check when i finish work.

**shimmy** · 08-12-2009, 07:41 PM

For your front AP callipers the standard style code for Pagid and PF discs is E8018 but E1903 also work (not sure if difference is shape or just thickness of 1mm.) you can def get RS29 and RS14 in one or other of these codes.

Questmead do the Pagid and also the AP bolt kit (2no) that you'll need as you should replace all lock nuts to 14nm.

Your PF discs will fit the AP bells ok but new nuts/bolts as above.

No idea with OEM rears

s.mac · 08-12-2009, 08:00 PM

RS29's U8018 - AC7095J7J fronts not sure if you need the first bit
RS29's U1265 - AC40915E18E rears again not sure if you need the first bit

**TMAQ** · 09-12-2009, 09:41 PM

thanks

. trying to decide what pads to go for, might stick to what i've got, rs29 all round, dont mind the squeakiness on the road. found a chap that will do the PF discs for £196+vat so about £225, seems good compared to other prices i've been getting. going to give Questmead a call tomorrow see what they can do.

**shimmy** · 09-12-2009, 09:57 PM

Quote:

Originally Posted by s.mac

RS29's U1265 - AC40915E18E rears again not sure if you need the first bit

isnt that AP rear pads and not OEM BMW

**TMAQ** · 10-12-2009, 11:59 AM

Quote:

Originally Posted by shimmy

you should replace all lock nuts to 14nm.

Your PF discs will fit the AP bells ok but new nuts/bolts as above.

No idea with OEM rears

damn.. my torque wrench will go as low as 28nm

. have something on my Christmas list now.

done a bit more searching, E2685 are the ones to go for with standard rears.

s.mac · 10-12-2009, 03:15 PM

Quote:

isnt that AP rear pads and not OEM BMW

yes Shimmy

I thought that was what he was after

trackm3 · 10-12-2009, 09:27 PM

Quote:

Originally Posted by shimmy

For your front AP callipers the standard style code for Pagid and PF discs is E8018 but E1903 also work (not sure if difference is shape or just thickness of 1mm.) you can def get RS29 and RS14 in one or other of these codes.

Questmead do the Pagid and also the AP bolt kit (2no) that you'll need as you should replace all lock nuts to 14nm.

Your PF discs will fit the AP bells ok but new nuts/bolts as above.

No idea with OEM rears

We only do E1903's at the moment and it is the pad depth that is the difference.

**shimmy** · 11-12-2009, 07:09 PM

I thought so.

RS14 tend to be 1mm thicker which can cause a problem on new discs.

Questmead do always ask with E1903 if you want them ground thinner!

08-12-2009, 04:11 PM	#1
TMAQ S5, Sport Off, DSC M-track Join Date: Mar 2009 Location: Surrey Posts: 591 Casino cash: $2203	Pagid ref numbers for AP and standard rears In the process of changing my pads all-round and replacing my front AP discs with PF ones (PF discs ref# 356.32.0054.03/04). I have a standard setup on the rear and have the AP kit on the front, the AP kit I have is CP5575-1004. Been shopping around for decent prices, however need a hand to clarify a few things… what is the pagid ref number for this AP kit, E1903 I think? The AP website references CP5070D54 for pads but a few companys I have emailed say Pagid don’t exist for the AP kit I have, even though I have Pagid on there at the moment and a fair few of you guys do. The companys that do the pagid, dont do the rs14s. Regarding the new PF discs, 99% certain they should mount the AP bell’s I currently have? The Pagid pad reference for the standard rears, E2685? thanks Last edited by TMAQ; 08-12-2009 at 04:14 PM.

08-12-2009, 04:34 PM	#2
glendog74 CSL Register Uber-poster! Tetris Champion! Join Date: Apr 2008 Location: Cornwall Posts: 8,861 Casino cash: $32299	I have a set of Pagid RS29s (for APs) at home in their box so could check when i finish work. __________________ Cha'mone Mother F**ker!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-12-2009, 07:41 PM	#3
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	For your front AP callipers the standard style code for Pagid and PF discs is E8018 but E1903 also work (not sure if difference is shape or just thickness of 1mm.) you can def get RS29 and RS14 in one or other of these codes. Questmead do the Pagid and also the AP bolt kit (2no) that you'll need as you should replace all lock nuts to 14nm. Your PF discs will fit the AP bells ok but new nuts/bolts as above. No idea with OEM rears

08-12-2009, 08:00 PM	#4
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	RS29's U8018 - AC7095J7J fronts not sure if you need the first bit RS29's U1265 - AC40915E18E rears again not sure if you need the first bit

09-12-2009, 09:41 PM	#5
TMAQ S5, Sport Off, DSC M-track Join Date: Mar 2009 Location: Surrey Posts: 591 Casino cash: $2203	thanks . trying to decide what pads to go for, might stick to what i've got, rs29 all round, dont mind the squeakiness on the road. found a chap that will do the PF discs for £196+vat so about £225, seems good compared to other prices i've been getting. going to give Questmead a call tomorrow see what they can do.

11-12-2009, 07:09 PM	#10
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	I thought so. RS14 tend to be 1mm thicker which can cause a problem on new discs. Questmead do always ask with E1903 if you want them ground thinner!