what psi for 18" slicks?

donkcsl · 26-09-2009, 11:37 AM

Just got my slicks fitted to the track rims, but not sure about pressure's

s.mac · 26-09-2009, 01:27 PM

sorry I cant help you with pressures but what slicks have you gone for ?

_Nathan_ · 26-09-2009, 01:41 PM

Use a pyrometer to work it out.

El_Gordo · 26-09-2009, 01:53 PM

Quote:

Originally Posted by _Nathan_

Use a pyrometer to work it out.

Thats unhelpful

We ended up at around 24psi cold on Dunlop Slicks, you could start there, but Nathan is right you need to look at tyre temps across the tyre

3wheels3 · 26-09-2009, 01:54 PM

dontdobends will give his opinion

_Nathan_ · 26-09-2009, 07:48 PM

It all depends on the width of the slicks which isn't given, the make & compound, the stiffness of the sidewalls, the weight of the car, the suspension stiffness, the geo etc etc.

32 hot is a good starting point but I really would suggest a pyrometer to tune it to what works for you with your settings.

donkcsl · 27-09-2009, 09:48 AM

thanks

should have said i was just looking a starting point as someone had told me u run them 4-5psi lower than road tyres, as nathan say diferent tyres, cars etc

donkcsl · 27-09-2009, 09:56 AM

Quote:

Originally Posted by _Nathan_

Use a pyrometer to work it out.

i take it the goal is to get temp's equal across the surface of the tyre

_Nathan_ · 27-09-2009, 10:11 AM

No, the goal is to have a spread across (have heard anything from 10-15 degrees spread) with the insides the hottest, but for pressures you can get a very good idea if it is working by seeing if the middle is hotter (over inflated), or colder (under inflated) than either side.

Curly is yer man for the Michelins as that is what he used to use, I've only ever used the dunlops.

donkcsl · 27-09-2009, 09:51 AM

Quote:

Originally Posted by s.mac

sorry I cant help you with pressures but what slicks have you gone for ?

used michelin ex porsche cup

26-09-2009, 11:37 AM	#1
donkcsl S3 - On the open road Join Date: Sep 2007 Location: N IRELAND Posts: 101 Casino cash: $1204	what psi for 18" slicks? Just got my slicks fitted to the track rims, but not sure about pressure's

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

26-09-2009, 01:27 PM	#2
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	sorry I cant help you with pressures but what slicks have you gone for ?

26-09-2009, 01:41 PM	#3
_Nathan_ Driving it like I nicked it Join Date: Sep 2008 Posts: 2,099 Casino cash: $13060	Use a pyrometer to work it out.

26-09-2009, 01:54 PM	#5
3wheels3 S5, Sport Off, DSC M-track Join Date: Jun 2008 Posts: 773 Casino cash: $21189	dontdobends will give his opinion

26-09-2009, 07:48 PM	#6
_Nathan_ Driving it like I nicked it Join Date: Sep 2008 Posts: 2,099 Casino cash: $13060	It all depends on the width of the slicks which isn't given, the make & compound, the stiffness of the sidewalls, the weight of the car, the suspension stiffness, the geo etc etc. 32 hot is a good starting point but I really would suggest a pyrometer to tune it to what works for you with your settings.

27-09-2009, 09:48 AM	#7
donkcsl S3 - On the open road Join Date: Sep 2007 Location: N IRELAND Posts: 101 Casino cash: $1204	thanks should have said i was just looking a starting point as someone had told me u run them 4-5psi lower than road tyres, as nathan say diferent tyres, cars etc

27-09-2009, 10:11 AM	#9
_Nathan_ Driving it like I nicked it Join Date: Sep 2008 Posts: 2,099 Casino cash: $13060	No, the goal is to have a spread across (have heard anything from 10-15 degrees spread) with the insides the hottest, but for pressures you can get a very good idea if it is working by seeing if the middle is hotter (over inflated), or colder (under inflated) than either side. Curly is yer man for the Michelins as that is what he used to use, I've only ever used the dunlops.