|
|
|||||||
| Register | FAQ | Donate | Members List | Calendar | Arcade | Casino | vBGarage | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
|
07-08-2016, 02:09 PM
|
#1 |
|
S3 - On the open road
 Join Date: Oct 2008
Posts: 102
Casino cash: $5788  |
Rebuilt Valeo alternator - pulley too tight?
I am in the process of replacing the original alternator in my car. I've gone for a Valeo re-manufactured unit, part number 437320.
Unpacking the unit, I've noticed that the pulley is very tight. So tight that I can't turn it by hand and need quite a bit of force with a ratchet to even get it to move. Bad unit? The unit that came out span freely. The pulley is sitting on a spindle with, I think a 22m nut on it. I could get a garage to loosen it with air, if that were a way of solving the problem. |
|
|
|
08-08-2016, 08:59 AM
|
#2 |
|
Driving it like I nicked it
Join Date: Mar 2009
Posts: 2,784
Casino cash: $29969  |
I bought the same unit a few years back.
No issues turning etc. I would replace the unit if I were you. |
|
|
|
|
08-08-2016, 10:41 AM
|
#3 |
|
S6, Sport On, Traction Off
Join Date: Jun 2008
Location: Aberdeenshire
Posts: 1,947
Casino cash: $25387 |
it should have 0 resistance so get it replaced if you can.
__________________
 Paul. Ooooft!!! 15yrs in the CSL and still loving it  "shine on you crazy diamond" 
|
|
|
|
|
13-08-2016, 02:27 PM
|
#4 |
|
S3 - On the open road
Join Date: Oct 2008
Posts: 102
Casino cash: $5788 |
Swapped and all sorted - thanks both.
|
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
