CSl Spring refresh

[shimmy]

So I'm a bit late with the winter makeover so I'm doing it in the spring!

Plans are as follows:

1. New front prop coupling (old one worn out)
2. New AC condenser (see if this helps cooling)
3. Gearbox fluid change/Diff fluid change
4. Power steering fluid change
5. AP brake strip, seals, nipples and paint an refit
6. New good ridge brake lines
7. Front brake stone guards
8. Front and rear wheel bearings
9. Intrax refurb to black Titan
10. New Geo

Need to get going!

[Trawler]

Originally Posted by shimmy

So I'm a bit late with the winter makeover so I'm doing it in the spring!

Plans are as follows:

1. New front prop coupling (old one worn out)
2. New AC condenser (see if this helps cooling)
3. Gearbox fluid change/Diff fluid change
4. Power steering fluid change
5. AP brake strip, seals, nipples and paint an refit
6. New good ridge brake lines
7. Front brake stone guards
8. Front and rear wheel bearings
9. Intrax refurb to black Titan
10. New Geo

Need to get going!

Didn't know you are into DIY keep this up & you will be giving Gareth a run for his money.

[shimmy]

Originally Posted by Trawler

Didn't know you are into DIY keep this up & you will be giving Gareth a run for his money.

Didn't say I'd be doing it

[s.mac]

What are you doing with your nipples Shimmy ?

[shimmy]

Originally Posted by s.mac

What are you doing with your nipples Shimmy ?

Do you want them GayColin?

[s.mac]

Are they still as pert as your holiday pic ?

[shimmy]

Originally Posted by shimmy

So I'm a bit late with the winter makeover so I'm doing it in the spring!

Plans are as follows:

1. New front prop coupling (old one worn out)
2. New AC condenser (see if this helps cooling)
3. Gearbox fluid change/Diff fluid change
4. Power steering fluid change
5. AP brake strip, seals, nipples and paint an refit
6. New good ridge brake lines
7. Front brake stone guards
8. Front and rear wheel bearings
9. Intrax refurb to black Titan
10. New Geo

Need to get going!

Eurocarparts have sale on so thought about buying the bits now.....but not sure on quality

[mattCSLnut]

Originally Posted by shimmy

Eurocarparts have sale on so thought about buying the bits now.....but not sure on quality

Stick to "Lemforder" , "Valeo", etc parts as they are (more often than not) one of the BMW OEM parts makers

[Graham]

Lemforder is OEM quality. Used a few bits on mine, tie rod ends, track rod ends etc. Know people who've used them for lower arms and they've been fine

[shimmy]

Originally Posted by Graham

Lemforder is OEM quality. Used a few bits on mine, tie rod ends, track rod ends etc. Know people who've used them for lower arms and they've been fine

FAG are meant t be OEM as well, or is that just in uS