AP Copper washers

rstoughy · 25-07-2013, 11:26 AM

Does anyone have the spec of these (if they are even copper).
Have a slight weep from one of my front hoses, gave it a little tighten up but there is still something there.

really just looking for the size so I can purchase before I replace.

Cheers,

trackm3 · 25-07-2013, 12:42 PM

Give AP technical dept a call, Paul I think is the best guy, he will normally bung a couple in the post FOC

**CraigMillwardCroft** · 25-07-2013, 08:32 PM

It is copper a mate of mine when we were Racing GT40 replicars had an issue did a bit of DIY and when he went off in a big way at Mallory, on investigation of the car back at the workshop I found he had put a plain washer in so brake pipe came loose while racing, expensive mistake me thought back then.

Graham · 26-07-2013, 02:39 AM

Copper washers that you put either side of the braided line onto the caliper? Surely a copper washer is a copper washer

don't have to be AP specific?

Equinox · 27-07-2013, 12:33 AM

Quote:

Originally Posted by Graham

Copper washers that you put either side of the braided line onto the caliper? Surely a copper washer is a copper washer

don't have to be AP specific?

Correct, 10mm copper washer at a guess.

25-07-2013, 11:26 AM	#1
rstoughy S6, Sport On, Traction Off Join Date: Jun 2008 Location: Aberdeenshire Posts: 1,947 Casino cash: $25387	AP Copper washers Does anyone have the spec of these (if they are even copper). Have a slight weep from one of my front hoses, gave it a little tighten up but there is still something there. really just looking for the size so I can purchase before I replace. Cheers, __________________ Paul. Ooooft!!! 15yrs in the CSL and still loving it "shine on you crazy diamond"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

25-07-2013, 12:42 PM	#2
trackm3 S5 - Full Throttle Join Date: Sep 2009 Posts: 411 Casino cash: $18073	Give AP technical dept a call, Paul I think is the best guy, he will normally bung a couple in the post FOC

25-07-2013, 08:32 PM	#3
CraigMillwardCroft CSL Register Uber-poster! Join Date: Oct 2010 Location: Marlow Posts: 3,973 Casino cash: $18153	It is copper a mate of mine when we were Racing GT40 replicars had an issue did a bit of DIY and when he went off in a big way at Mallory, on investigation of the car back at the workshop I found he had put a plain washer in so brake pipe came loose while racing, expensive mistake me thought back then.

26-07-2013, 02:39 AM	#4
Graham S5 - Full Throttle Join Date: Mar 2012 Posts: 405 Casino cash: $7152	Copper washers that you put either side of the braided line onto the caliper? Surely a copper washer is a copper washer don't have to be AP specific?