AP Racing Rear Caliper bolt?

**cantfind1** · 13-04-2013, 11:57 PM

Anyone know of a supplier who would stock these.

Looking for the bolt on the rear caliper that holds the pads in. Mine has seized, typically, and before I try and get it out want to have a spare!

Was thinking a bit of heat my do the trick, but this will damage the paint, any other suggestions??

**Mike R** · 14-04-2013, 12:11 AM

Quote:

Originally Posted by cantfind1

Anyone know of a supplier who would stock these.

Looking for the bolt on the rear caliper that holds the pads in. Mine has seized, typically, and before I try and get it out want to have a spare!

Was thinking a bit of heat my do the trick, but this will damage the paint, any other suggestions??

The bolt will be fine - its more likely to do damage to the thread in the calliper, as it is aluminium. When you do get it out, remember to put a small blob of copper slip on it.

If you use a hair drier, this should warm the alloy up enough to not damage the paint. You could also remove the calliper and lay it on its side on top of a bucket (so not to stretch the hose) and spray some Plus gas / WD40 in the threads, so that it can soak in?

**shimmy** · 14-04-2013, 12:14 AM

AP will supply these, or go to Questmead for anything AP.

I replaced my anti-rattles and bolts last year due to the amount of action theyd seen, just wanted clean threads for the aluminium helicoils to stop them cross threading

Equinox · 14-04-2013, 11:43 AM

The problem is caused with the age old issue of corrosion in the thread but as said if you re-build with copper slip it will prevent it happening again. If Questmead cant help you try Techcraft motorsport.

karbonkid · 14-04-2013, 12:58 PM

Questmead, but not sure they stock them.
Mine was seized last year. Bolt undid from thread but would not budge through tube sleeve. Applied heat to try and free it but no luck.
Ended up having to cut through sleeve & bolt to remove.

REAR AP

Bolt - # CP3439-110

Tube Sleeve - # CP5144-144

Helicoil for bolt (# CP3439-110) - # CP3714-116 (M8 x 1.25)

Copper grease new bolt generously prior to fitting inside new sleeve.

**cantfind1** · 14-04-2013, 01:34 PM

many thnks guys....will check with suppliers on monday.....will get all 3 parts.....

How does the helicoil fit into the caliper?? This is not my area of expertise!

13-04-2013, 11:57 PM	#1
cantfind1 S5, Sport Off, DSC M-track Join Date: Oct 2009 Location: Sydney Australia Posts: 675 Casino cash: $6490	AP Racing Rear Caliper bolt? Anyone know of a supplier who would stock these. Looking for the bolt on the rear caliper that holds the pads in. Mine has seized, typically, and before I try and get it out want to have a spare! Was thinking a bit of heat my do the trick, but this will damage the paint, any other suggestions??

14-04-2013, 12:14 AM	#3
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	AP will supply these, or go to Questmead for anything AP. I replaced my anti-rattles and bolts last year due to the amount of action theyd seen, just wanted clean threads for the aluminium helicoils to stop them cross threading __________________ .

14-04-2013, 11:43 AM	#4
Equinox S5, Sport Off, DSC M-track Join Date: Feb 2012 Posts: 554 Casino cash: $5666	The problem is caused with the age old issue of corrosion in the thread but as said if you re-build with copper slip it will prevent it happening again. If Questmead cant help you try Techcraft motorsport. __________________ '03 E46 SG CSL #084 '84 CAPRI 3.7 V6 '13 DISCOVERY 4 HSE '91 NOVA GTE '16 HONDA TRX500 QUAD

14-04-2013, 12:58 PM	#5
karbonkid S6, Sport On, Traction Off Join Date: Nov 2008 Location: Sussex Posts: 1,912 Casino cash: $10231	Questmead, but not sure they stock them. Mine was seized last year. Bolt undid from thread but would not budge through tube sleeve. Applied heat to try and free it but no luck. Ended up having to cut through sleeve & bolt to remove. REAR AP Bolt - # CP3439-110 Tube Sleeve - # CP5144-144 Helicoil for bolt (# CP3439-110) - # CP3714-116 (M8 x 1.25) Copper grease new bolt generously prior to fitting inside new sleeve. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

14-04-2013, 01:34 PM	#6
cantfind1 S5, Sport Off, DSC M-track Join Date: Oct 2009 Location: Sydney Australia Posts: 675 Casino cash: $6490	many thnks guys....will check with suppliers on monday.....will get all 3 parts..... How does the helicoil fit into the caliper?? This is not my area of expertise!