exhaust mounts

s.mac · 24-04-2010, 02:43 PM

does anyone know if there are any others mounts that you can buy apart from these?
http://www.turnermotorsport.com/html...ID=18201401797

I have just changed 1 that snapped when fitting a new custom made exhaust and noticed another has gone, the old ones have a metal surround but the replacements are as in the pic, rubber only and they don't look up to the job and gives the exhaust quite a bit of movement, it now rubs on the carbon diffuser when going over bumps

and they are £38 each!! robbing _ _ _ _ _

TANKSLAPPER · 24-04-2010, 03:14 PM

At the same time you should change the smaller rubber mounts near the cat's, they also go and are quite cheap !

s.mac · 24-04-2010, 03:43 PM

I didnt spot those but will have a look, thanks

NZ_M3 · 26-04-2010, 12:48 AM

The bracket is a separate part that you purchase separately (part 10 below 18207839657). Don't just put the rubber mount on there without the bracket it'll rip itself to pieces in no time.

7.77 · 26-04-2010, 08:15 AM

just check mine, also broken

mattCSLnut · 26-04-2010, 09:01 AM

Also check No.8s ... there are two of these, mounted onto a steel plate that is bolted to the chassis. These support the mid pipes, before the back box. Mine became week after the long Ring weekend (thank U Karussell) and now the exhaust bangs on the suspension, when going over bumps. £20 all in for 2X mounts & associated nuts has just been ordered from the Main Steelers

Quote:

Originally Posted by NZ_M3

The bracket is a separate part that you purchase separately (part 10 below 18207839657). Don't just put the rubber mount on there without the bracket it'll rip itself to pieces in no time.

s.mac · 26-04-2010, 12:17 PM

thanks for the info, I havent bought the separate part (10)

and will need to check the rest of the underneath

s.mac · 26-04-2010, 12:37 PM

I cant believe they've gone from quite a good mount to separate rubber piece and backing plate, the new one doesn't even have a steel support in the centre for the exhaust, I cant see them lasting long even with a backing plate

7.77 · 27-04-2010, 01:28 PM

i didn't notice the way it fits:

metal part (of part number 10) facing the exhaust, or on the other direction ?

24-04-2010, 02:43 PM	#1
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	exhaust mounts does anyone know if there are any others mounts that you can buy apart from these? http://www.turnermotorsport.com/html...ID=18201401797 I have just changed 1 that snapped when fitting a new custom made exhaust and noticed another has gone, the old ones have a metal surround but the replacements are as in the pic, rubber only and they don't look up to the job and gives the exhaust quite a bit of movement, it now rubs on the carbon diffuser when going over bumps and they are £38 each!! robbing _ _ _ _ _

24-04-2010, 03:14 PM	#2
TANKSLAPPER S5, Sport Off, DSC M-track Join Date: Nov 2008 Posts: 801 Casino cash: $8979	At the same time you should change the smaller rubber mounts near the cat's, they also go and are quite cheap ! __________________ Club Tankslapper: No doughnuts or wingnuts, if but’s, and monkey nuts. It's not a proper accident until you eat hospital food

24-04-2010, 03:43 PM	#3
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	I didnt spot those but will have a look, thanks

26-04-2010, 12:48 AM	#4
NZ_M3 S5, Sport On, DSC M-track Join Date: Jun 2008 Location: Auckland, New Zealand Posts: 1,434 Casino cash: $13579	The bracket is a separate part that you purchase separately (part 10 below 18207839657). Don't just put the rubber mount on there without the bracket it'll rip itself to pieces in no time.

26-04-2010, 08:15 AM	#5
7.77 S5 - Full Throttle Join Date: Dec 2008 Location: france Posts: 284 Casino cash: $4221	just check mine, also broken

26-04-2010, 12:17 PM	#7
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	thanks for the info, I havent bought the separate part (10) and will need to check the rest of the underneath

26-04-2010, 12:37 PM	#8
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	I cant believe they've gone from quite a good mount to separate rubber piece and backing plate, the new one doesn't even have a steel support in the centre for the exhaust, I cant see them lasting long even with a backing plate

27-04-2010, 01:28 PM	#9
7.77 S5 - Full Throttle Join Date: Dec 2008 Location: france Posts: 284 Casino cash: $4221	i didn't notice the way it fits: metal part (of part number 10) facing the exhaust, or on the other direction ?