|
23-04-2015, 09:53 PM | #1 |
CSL Register Uber-poster!
|
1M Carbon parts
Well the 1M was needing a little Carbon just so i could feel at home
Radio and Aircon panel Got new trims from bmw as they are cheap and that way i can put the car back to standard if or when i sell it. Sanded the trims then the resin went on |
23-04-2015, 09:55 PM | #2 |
CSL Register Uber-poster!
|
After the resin goes tacky around 4 hours the carbon is put on and then the parts are put in a vacuum bag for another 6 hours.
Then they are taken out the vacuum bag. |
23-04-2015, 09:56 PM | #3 |
CSL Register Uber-poster!
|
More coats for resin then trim the excess carbon sand the parts down and more resin.
|
23-04-2015, 09:58 PM | #4 |
CSL Register Uber-poster!
|
Another coat of resin then sand down again with 800grit wet and dry.
(No finger prints left) |
23-04-2015, 10:01 PM | #5 |
CSL Register Uber-poster!
|
Then its time for the 2k clear.
|
23-04-2015, 10:03 PM | #6 |
CSL Register Uber-poster!
|
Snading agin this time 1500 grit then 2000 grit and polish and install
Just the ashtray gear surround and the cic trim |
|
|