What spacers are you guys using?

bryce · 30-11-2008, 01:06 PM

As you'll see here http://www.cslregister.com/forum/viewtopic.php?t=1011 Ive fitted my KWs. But to achieve thw ride height I want, I think Im needing spacers, as its rubbing the springs.

Ive done a bit of reading up on the www and I see many are going bigger in the front than rear, to get the axles matching width wise. I dont want to do that, I want to keep the oem look of wider rear - hence same size all round. I want to go the minimum I can, to keep stresses to the min.

Any recommendation?

**Mark CSL** · 30-11-2008, 04:32 PM

Ac Schnitzer spacers come in 7mm

I run 15mm front and 10mm rear
it still has the wider rear look

david · 30-11-2008, 05:50 PM

I run 16mm Eibach models all around

**shimmy** · 30-11-2008, 08:03 PM

on track i run 12mm all round but on road zero

_Nathan_ · 30-11-2008, 08:23 PM

10mm H&R hubcentric

**shimmy** · 30-11-2008, 08:35 PM

Quote:

Originally Posted by shimmy

on track i run 12mm all round but on road zero

by the way this is for a few reasons but the main one is because they seem to have self welded themselves onto the track rims!

bryce · 30-11-2008, 08:54 PM

http://www.turnermotorsport.com/html...UCT_ID=1075725

^would these do? Or are my wheels (CSL) a beveled mounting surface? They're half the price of 10mm

houlbt · 30-11-2008, 10:44 PM

Personally I don't run spacers... but these are on the BMsport.com website and seem a fair price. With the weak exchange rate plus postage the TMS (Turner Motorsport) stuff just isn't as cheap as it used to be

Anyway if you call Bexleys tell them I sent you... (Tom)

bryce · 30-11-2008, 11:14 PM

Thanks Tom, how come you dont run them when your car seems pretty low?

Are 5mm OK for oem wheels, Id imagine there wont be much grip on the original hub?

bryce · 30-11-2008, 11:17 PM

Are they TMS spacers btw?

30-11-2008, 01:06 PM	#1
bryce S5, Sport On, DSC M-track Join Date: Nov 2008 Location: Scotland (sw) Posts: 1,369 Casino cash: $2512	What spacers are you guys using? As you'll see here http://www.cslregister.com/forum/viewtopic.php?t=1011 Ive fitted my KWs. But to achieve thw ride height I want, I think Im needing spacers, as its rubbing the springs. Ive done a bit of reading up on the www and I see many are going bigger in the front than rear, to get the axles matching width wise. I dont want to do that, I want to keep the oem look of wider rear - hence same size all round. I want to go the minimum I can, to keep stresses to the min. Any recommendation?

30-11-2008, 05:50 PM	#3
david S5 - Full Throttle Join Date: Apr 2008 Location: just across the channel... Posts: 356 Casino cash: $2243	I run 16mm Eibach models all around __________________ pleasure is not only in the straight line.....

30-11-2008, 10:44 PM	#8
houlbt S3 - On the open road Join Date: Aug 2008 Posts: 115 Casino cash: $311	Personally I don't run spacers... but these are on the BMsport.com website and seem a fair price. With the weak exchange rate plus postage the TMS (Turner Motorsport) stuff just isn't as cheap as it used to be Anyway if you call Bexleys tell them I sent you... (Tom) __________________ Black Scuderia, White CSL, Orange M3 Racecar

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pics of CSL with Spacers	cslbecks	Main Message Centre	36	16-08-2016 11:51 PM
Rear bush limiting kit + wheel spacers	glendog74	Technical Area	23	22-10-2008 10:19 PM
Wheel Spacers - Advice	cslbecks	Technical Area	3	19-10-2008 06:53 PM
Burnout Gone Bad Guys Slams Right into car	MysticCobra1200	Photo Gallery	1	08-07-2008 10:25 AM
WHEEL SPACERS ARE A GOOD MOD	Mark CSL	Technical Area	19	30-04-2008 10:09 AM

30-11-2008, 04:32 PM	#2
Mark CSL CSL Register Uber-poster! Join Date: Sep 2007 Location: Scotland Posts: 8,777 Casino cash: $42229	Ac Schnitzer spacers come in 7mm I run 15mm front and 10mm rear it still has the wider rear look

30-11-2008, 08:03 PM	#4
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	on track i run 12mm all round but on road zero

30-11-2008, 08:23 PM	#5
_Nathan_ Driving it like I nicked it Join Date: Sep 2008 Posts: 2,099 Casino cash: $13060	10mm H&R hubcentric

30-11-2008, 08:54 PM	#7
bryce S5, Sport On, DSC M-track Join Date: Nov 2008 Location: Scotland (sw) Posts: 1,369 Casino cash: $2512	http://www.turnermotorsport.com/html...UCT_ID=1075725 ^would these do? Or are my wheels (CSL) a beveled mounting surface? They're half the price of 10mm

30-11-2008, 11:14 PM	#9
bryce S5, Sport On, DSC M-track Join Date: Nov 2008 Location: Scotland (sw) Posts: 1,369 Casino cash: $2512	Thanks Tom, how come you dont run them when your car seems pretty low? Are 5mm OK for oem wheels, Id imagine there wont be much grip on the original hub?

30-11-2008, 11:17 PM	#10
bryce S5, Sport On, DSC M-track Join Date: Nov 2008 Location: Scotland (sw) Posts: 1,369 Casino cash: $2512	Are they TMS spacers btw?