Ohlins TTX in M3 CSL (Ohlins TTX46 MKII & TTX40 MKII)

**alexk** · 20-04-2013, 08:02 PM

Christmas came early for me in 2013 and here is the long desired dampers for my CSL.

The fronts are TTX46 MT MKII (the part number from the 320si WTCC) and the rears TTX40 MKII.
The fronts have integrated travel sensors, which is a good thing.
All of them are 4-way adjustable and Ohlins has a simulation software for these dampers, where you dial your setup and calculate the damping torque curve.
This is so as you have an understanding what is going to happen, even though you do not have a damper dyno to test the dampers.

2927g

1462g

trackm3 · 20-04-2013, 08:06 PM

Very Nice Alex, will you be sleeping with them tonight

**shimmy** · 20-04-2013, 08:27 PM

they look fantastic but the infinite adjustment with limited skill to do so would concern me!

northernjim · 21-04-2013, 12:54 AM

gorgeous

get the springs and get them fitted quick!

**shimmy** · 21-04-2013, 01:04 AM

Quote:

Originally Posted by shimmy

they look fantastic but the infinite adjustment with limited skill to do so would concern me!

By the way, I meant MY limited skill!

northernjim · 21-04-2013, 02:05 AM

Quote:

Originally Posted by shimmy

By the way, I meant MY limited skill!

We all knew that dickwad

Bounce · 21-04-2013, 02:04 PM

Quote:

Originally Posted by northernjim

We all knew that dickwad

deanobeano · 21-04-2013, 05:29 PM

I's put them in a frame in my front room...hmmmm

_Nathan_ · 21-04-2013, 06:31 PM

They do look stunning, proper suspension porn!

Have they been valved for the CSL boat anchor engine and overall heavyness of the car or is there enough latitude in the damping adjustment to negate the need?

What Spring rates are you going to run?

**alexk** · 21-04-2013, 06:59 PM

Hi Nathan

The current plan is for 130N/mm front and 80N/mm rear.
They have standard valving for the 320si WTCC but I think there is enough adjustment.
40 clicks for low speed and 50 clicks for high speed.
It should be more than sufficient for now.
During winter I am going to service them and if the valving is not ok, I will change it.

20-04-2013, 08:02 PM	#1
alexk Driving it like I nicked it Join Date: Mar 2009 Posts: 2,784 Casino cash: $29969	Ohlins TTX in M3 CSL (Ohlins TTX46 MKII & TTX40 MKII) Christmas came early for me in 2013 and here is the long desired dampers for my CSL. The fronts are TTX46 MT MKII (the part number from the 320si WTCC) and the rears TTX40 MKII. The fronts have integrated travel sensors, which is a good thing. All of them are 4-way adjustable and Ohlins has a simulation software for these dampers, where you dial your setup and calculate the damping torque curve. This is so as you have an understanding what is going to happen, even though you do not have a damper dyno to test the dampers. 2927g 1462g __________________ www.clubcsl.com - I am a BMW Motorsport fan ! My youtube channel is here

20-04-2013, 08:27 PM	#3
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	they look fantastic but the infinite adjustment with limited skill to do so would concern me! __________________ .

21-04-2013, 12:54 AM	#4
northernjim Driving it like I nicked it Join Date: Oct 2008 Location: lancashire Posts: 2,082 Casino cash: $20572	gorgeous get the springs and get them fitted quick! __________________

21-04-2013, 06:31 PM	#9
_Nathan_ Driving it like I nicked it Join Date: Sep 2008 Posts: 2,099 Casino cash: $13060	They do look stunning, proper suspension porn! Have they been valved for the CSL boat anchor engine and overall heavyness of the car or is there enough latitude in the damping adjustment to negate the need? What Spring rates are you going to run? __________________ Nathan

21-04-2013, 06:59 PM	#10
alexk Driving it like I nicked it Join Date: Mar 2009 Posts: 2,784 Casino cash: $29969	Hi Nathan The current plan is for 130N/mm front and 80N/mm rear. They have standard valving for the 320si WTCC but I think there is enough adjustment. 40 clicks for low speed and 50 clicks for high speed. It should be more than sufficient for now. During winter I am going to service them and if the valving is not ok, I will change it. __________________ www.clubcsl.com - I am a BMW Motorsport fan ! My youtube channel is here

20-04-2013, 08:06 PM	#2
trackm3 S5 - Full Throttle Join Date: Sep 2009 Posts: 411 Casino cash: $18073	Very Nice Alex, will you be sleeping with them tonight

21-04-2013, 05:29 PM	#8
deanobeano S5 - Full Throttle Join Date: Mar 2013 Location: Midlands Posts: 310 Casino cash: $3117	I's put them in a frame in my front room...hmmmm