Pagid RS14 or RS29 (on AP brakes)? - Page 4

Franzino · 01-11-2012, 07:10 PM

The new brake pads are now a couple of weeks on my car. Since that time I did the Pagid bedding in procedure, a week of normal slow street driving and 3 trip's to the Nurburgring. The brakes are now awesome..! I use to think my AP set-up was great....now I think the complete AP set-up is really awesome! With changing the brake pads I now have everything on the 100% "I like" level. Everything I wanted more about the AP brakes is now there. I have an increase in initial bite (on street and track), a little more braking power, higher working temperatures on track (650°C => 800°C), slightly better modulation and less ABS interference! :thumbsup:

At this moment the new brake pads are not silent anymore :cry: . They were silent before the bedding in, after the bedding in, on the street, on the track…… I was filled with joy and it was to good to be true! But one day after the Nurburgring trip, they started to make the same squealing noise as the blue ones did. I have let my shop file of the edges (advised by Pagid) and put a really small amount of copper grease on the back of the pad where the pistond thouch the pads (did the same thing with my previous set of blue ones). I was worried that the RS-14 would not brake well when being cold on the street, but this is not the case...

01-11-2012, 07:10 PM	#31
Franzino Wonky 'L' after Washing Join Date: Aug 2012 Posts: 7 Casino cash: $310	The new brake pads are now a couple of weeks on my car. Since that time I did the Pagid bedding in procedure, a week of normal slow street driving and 3 trip's to the Nurburgring. The brakes are now awesome..! I use to think my AP set-up was great....now I think the complete AP set-up is really awesome! With changing the brake pads I now have everything on the 100% "I like" level. Everything I wanted more about the AP brakes is now there. I have an increase in initial bite (on street and track), a little more braking power, higher working temperatures on track (650°C => 800°C), slightly better modulation and less ABS interference! :thumbsup: At this moment the new brake pads are not silent anymore :cry: . They were silent before the bedding in, after the bedding in, on the street, on the track…… I was filled with joy and it was to good to be true! But one day after the Nurburgring trip, they started to make the same squealing noise as the blue ones did. I have let my shop file of the edges (advised by Pagid) and put a really small amount of copper grease on the back of the pad where the pistond thouch the pads (did the same thing with my previous set of blue ones). I was worried that the RS-14 would not brake well when being cold on the street, but this is not the case...