A day in Wales! - Page 3

**glendog74** · 14-08-2010, 12:22 AM

Quote:

Originally Posted by daniel

Was the wear already that uneven or could you do with more camber?

Quote:

Originally Posted by glendog74

These were a pair of used tyres that i acquired and they already had uneven wear on the outside of the tyre.

bromers · 14-08-2010, 09:40 AM

My car got splattered in black rubber marks that day (black on black) - they come off with a bit of elbow grease but a PITA.

My mates white Turbo looked a right mess.

Did yours survive Ok ?

daniel · 14-08-2010, 11:40 AM

Quote:

Originally Posted by glendog74

So they were already that uneven? The only reason I ask is that I thought my wear was uneven at -2.5.

Dan · 14-08-2010, 11:53 AM

Just a thought Rob, when you cage the car up are you going to keep the standard CSL seats or change over to some aftermarket Recaro's or something?

**glendog74** · 14-08-2010, 01:11 PM

Quote:

Originally Posted by bromers

My car got splattered in black rubber marks that day (black on black) - they come off with a bit of elbow grease but a PITA.

My mates white Turbo looked a right mess.

Did yours survive Ok ?

Not too bad mate - there were never that many cars on track that i got stuck behind anyone for too long

I tend to find MLR days worse for rubber marks as they mostly all use slick tyres

Quote:

Originally Posted by daniel

So they were already that uneven? The only reason I ask is that I thought my wear was uneven at -2.5.

Those tyres had come from a CSL with OEM suspension i think and it's setup was probably running -1.5 degrees max camber i would have thought.

I run -2.5 degrees but i feel i would benefit from -3.0 or even -3.5 degrees. I also rarely use my Cup tyres on road which doesn't really help to even out the wear over on the inner side

Quote:

Originally Posted by Dan

Just a thought Rob, when you cage the car up are you going to keep the standard CSL seats or change over to some aftermarket Recaro's or something?

Will sell the original seats most probably and as you cant use proper harnesses with them.

Dan · 14-08-2010, 01:54 PM

Quote:

Originally Posted by glendog74

Will sell the original seats most probably and as you cant use proper harnesses with them.

Good point, I didn't think if you were going to run harness', Recaro Pole Position's are a lovely seat!

14-08-2010, 11:53 AM	#24
Dan Driving it like I nicked it Join Date: Nov 2009 Posts: 2,058 Casino cash: $6689	Just a thought Rob, when you cage the car up are you going to keep the standard CSL seats or change over to some aftermarket Recaro's or something? __________________

14-08-2010, 09:40 AM	#22
bromers S4 - Getting the hang of it Join Date: May 2009 Location: UK Posts: 189 Casino cash: $4347	My car got splattered in black rubber marks that day (black on black) - they come off with a bit of elbow grease but a PITA. My mates white Turbo looked a right mess. Did yours survive Ok ?