WANTED: some bits pls

[shimmy]

Need the following so if you have a spare and need a home for it or have sold your car and these are in the draw please let me know.

• BMW glove box torch
• BMW blue warning triangle
• BMW front Bonnett/hood badge
• Induction box Flap and bolts
• M Caps for top front suspension turrets (L and R)

And various clips and bolt caps an covers

Willing to pay but not what they are worth

[funtime]

Is this for Bealo's resurrection?

[shimmy]

Originally Posted by funtime

Is this for Bealo's resurrection?

mixture of mine and his really

[rstoughy]

Shimmy,
Put a full compliment of new OEM badges on mine the other week so I have a bonnett badge.
It's not mint but yours FOC if you want it?
Can take it to Snett next weekend if that suits?

[shimmy]

Originally Posted by rstoughy

Shimmy,
Put a full compliment of new OEM badges on mine the other week so I have a bonnett badge.
It's not mint but yours FOC if you want it?
Can take it to Snett next weekend if that suits?

Ta, Bealos is looking a bit silver rather than White tbh and I might need a lesson in how to remove it? a big screw driver may not be appropriate

[karbonkid]

Shim - you have 2 rubber grommets that the badge pins sit in. The badge just needs to be pulled away from them. Best to slide a cloth or piece of paper under the corner of the badge to protect the paintwork before using a flat headed screwdriver with masking tape over the end. Just plys off off with ease.

[_Nathan_]

Think I have a warning triangle. Maybe a torch too somewhere.

[shane@mbtech]

Originally Posted by shimmy

Need the following so if you have a spare and need a home for it or have sold your car and these are in the draw please let me know.

• BMW glove box torch
• BMW blue warning triangle
• BMW front Bonnett/hood badge
• Induction box Flap and bolts
• M Caps for top front suspension turrets (L and R)

And various clips and bolt caps an covers

Willing to pay but not what they are worth

Shimmy, give me a buzz monday, I should have most of what you need, all except flap bolts, and the M caps.

[shimmy]

Originally Posted by karbonkid

Shim - you have 2 rubber grommets that the badge pins sit in. The badge just needs to be pulled away from them. Best to slide a cloth or piece of paper under the corner of the badge to protect the paintwork before using a flat headed screwdriver with masking tape over the end. Just plys off off with ease.

Ta, just seen them on realOEM

Originally Posted by _Nathan_

Think I have a warning triangle. Maybe a torch too somewhere.

Would be super

Originally Posted by lawsy

Shimmy, give me a buzz monday, I should have most of what you need, all except flap bolts, and the M caps.

I'm at Bealos tomorrow rummaging around in his dads garage so I'll ring after I've found all I'm gonna find!

Ta all

[_Nathan_]

Will have a look in the garage tomorrow