20" Overfinch wheels to fit standard E46 3-series

[jph]

Hi all,
I've got a set of 20" wheels and tyres for sale that I had on my E46 330 Touring.....

-They're 20" x 8.5" Overfinch wheels that were originally fitted to a RangeRover and come fitted with 225/30/20 Nankang Ultrasport NS2's.
-They've been powdercoated satin black and i've fitted a silver vinyl pinstripe around the edge of the rim that CAN be removed in a couple of minutes to leave the wheel all-black.
-The wheels are all ET55 so I decided to manufacture some custom hub-centric spacers (18mm rear, 15mm front) to get the wheels sitting perfectly.
-Although the Overfinch RangeRover wheels share the same PCD and centre-bore dimensions as the E46 BMWs, they utilise a large shoulder-bolt design which isn't compatible with the BMW style wheelbolts. To overcome this problem I manufactured a set of Aluminium 'top-hat' adaptors which allows the use of standard BMW wheel bolts, although in this case longer than standard BMW bolts are provided to allow the use of the spacers.

The wheels and tyres are on very good condition with no damage on the front faces, and only a couple of marks on the back edge of the rim from mounting & storage.

Here are a few pics......







Being designed for a RangeRover these have quite a high load capacity and aren't the lightest wheels about, but they're fine for a daily driver.

They come with all the required spacers, wheelbolts, locking wheelbolts and 'top-hat' adaptors required to bolt straight onto your E46. They might fit E36/E90 with a bit of messing with spacers but i'm not sure.

No timewasters please, i'm on the south coast of East Sussex.

I'm after £650 all in.

Thanks for looking, Jon.