Eisenmann Exhaust not aligned properly

DaveD · 11-02-2010, 01:33 PM

Installed an Eisenmann exhaust a few weeks ago, the backbox is off centre though, one of the tips is touching the diffuser.

I then installed a Supersprint X Pipe last week and had a good look at the backbox. Couldn' get it aligned, tried bending the hangers slightly but it was no good.

Anyone any ideas how to tackle this? My OEM exhaust was like this too but didn't touch the diffuser due to the smaller tips. I put this down to a broken rubber mount but have replaced that with a new one and its still the same.

Pic attached. Any help appreciated ....

11-02-2010, 01:33 PM	#1
DaveD Wonky 'L' after Washing Join Date: Mar 2009 Location: Dublin, Ireland. Posts: 16 Casino cash: $811	Eisenmann Exhaust not aligned properly Installed an Eisenmann exhaust a few weeks ago, the backbox is off centre though, one of the tips is touching the diffuser. I then installed a Supersprint X Pipe last week and had a good look at the backbox. Couldn' get it aligned, tried bending the hangers slightly but it was no good. Anyone any ideas how to tackle this? My OEM exhaust was like this too but didn't touch the diffuser due to the smaller tips. I put this down to a broken rubber mount but have replaced that with a new one and its still the same. Pic attached. Any help appreciated .... __________________ Last edited by DaveD; 11-02-2010 at 01:53 PM.