![]() |
![]() |
#1 |
CSL Register Uber-poster!
![]() ![]() |
![]()
This is how to change the window switch trim I am fitting a carbon one
![]() Tools needed are a Phillips Screw Driver ![]() Pull up on the gear knob ![]() ![]() ![]() Then pull up on this part when off release the green connector ![]() Then remove the 2 screws You can see the Green connector on the right ![]() Unclip the window switches on each side there are 2 clips on each side ![]() Fit the switches in the new panel then place it down from the astray to the front then fit the 2 screws ![]() Fit the rest of the trims not forgetting to connect the green connector This is the finished part ![]() I sell the carbon ones PM me for details ![]() Last edited by Mark CSL; 26-06-2013 at 10:38 PM. |
![]() |
![]() |
|
|