Carbon Roof repair

Pip1968 · 03-03-2011, 06:47 PM

What about the points raised in the refurbishment of the CF splitters in this thread:-

http://cslregister.com/forum/showthread.php?t=2170

Karbon Kid "I did the prep work and I dropped them off to the bodyshop who are re-spraying the bumper.

They use a two part Lacquer which has a hardener in and this will give the best results, finishing with oven treatment. Like I did last time.

You cannot obtain a good and durable finish with any type of DIY aerosol, it gets applied too thin and does not last."

Does the laquer not need baking?

Pip

03-03-2011, 06:47 PM	#12
Pip1968 S5, Sport Off, DSC M-track Join Date: Dec 2007 Location: Kent, England Posts: 940 Casino cash: $8383	What about the points raised in the refurbishment of the CF splitters in this thread:- http://cslregister.com/forum/showthread.php?t=2170 Karbon Kid "I did the prep work and I dropped them off to the bodyshop who are re-spraying the bumper. They use a two part Lacquer which has a hardener in and this will give the best results, finishing with oven treatment. Like I did last time. You cannot obtain a good and durable finish with any type of DIY aerosol, it gets applied too thin and does not last." Does the laquer not need baking? Pip Last edited by Pip1968; 03-03-2011 at 06:48 PM. Reason: Tidy up

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode