Flap issue... need help

[x Spades x]

Hey Guys,

I'm from the States and I've replicated the CSL (not totally). I'm having an issue with my Brand New Snorkel flap and I don't know what to do. I installed it for the first time and it was in the closed position. I'm in non-sport mode, at a complete stop/low speeds, the flap flipped open upon start up. Now, it is stuck in the open position no matter what the rpms are. In sport mode, the flap goes from the open position to closed at 3500 rpms. It's doing the exact opposite thing it's supposed to do. This leaves the engine to choke on the highway. I've taken off the actuator and started the car. It spins in the direction that opens the flap, and never in the direction to close.

I've taken off the actuator, and closed the flap by hand, but I can't put back on the actuator as the bearing doesn't line up with the flap. Any help will be greatly appreciated. My car detail/relevant mods are below:

2005 M3 Jet Black/Imola ZCP
SMG - mileage 162k
New Karbonius 1:1 CSL airbox
New OEM snorkel w/ flap (manufactured 2014)
CSL Map sensor
CSL air rail
288/280 Schrick cams
DLC coated followers
Supersprint V1 stepped headers
Supersprint sec 1 w/ cats
OEM sec 2
Scorza exhaust
Custom dyno tuned
OEM 3.62 diff