|
Register | FAQ | Donate | Members List | Calendar | Arcade | Casino | vBGarage | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
04-02-2012, 08:12 PM | #1 |
S4 - Getting the hang of it
Join Date: May 2011
Posts: 135
Casino cash: $4767 |
Desperate for help from those who have installed an AP Racing BBK - beer on offer!
Chaps (evening CSLGirl) - I really need your help.
I am trying to fit an AP Racing BBK to the front of the CSL this evening and am completely stuck - please help! The original front discs are attached to the hub with 2 of these screws per side: I used to have a Stoptech kit that used these original crews to attach the discs. However, these do not fit the holes on the AP discs, yet no alternative screws are provided. The holes for these screws all line up ok, but are too big for these original screws: Am I missing something? Should the kit have come with AP-specific screws for this or am I being a dullard? Please help - I would be so grateful. There is beer/trackday cuppas for the right answer. Thanks guys. Last edited by Porter; 04-02-2012 at 08:17 PM. |
Thread Tools | |
Display Modes | |
|
|