Ordered Intrax 1K2 - questions/suggestions

[Porker]

Hi all,

After struggling to get to grips with my Bilstein PSS10, I decided to take the jump and to order the Intrax 1K2 suspension/camberplates/rose joints. Now Intrax offer the option to take the "Black Titan" coating, which should result in better roadholding. Is it worth the additional outlay?

Furthermore, are they easy to adjust? What setting is preferred for the 'ring?

Anything else I need to know? It'll be my first Intrax-suspension, looking forward to the experience!

[billyboysm3]

Get them in Black Titan as they will not rust. Other wise your need to get the front two changed when you get them serviced. Think I paid 100+ euros each.

Who are you buying them from? Think most have gone to simpsons, they then fit and set up.

[Porker]

Originally Posted by billyboysm3

Get them in Black Titan as they will not rust. Other wise your need to get the front two changed when you get them serviced. Think I paid 100+ euros each.

Who are you buying them from? Think most have gone to simpsons, they then fit and set up.

If I'm not mistaken the Black Titan is solely applied to the piston, would the piston otherwise rust? I've never had a piston rust even on lesser dampers?

It is indeed €400 extra to have them Black Titan'd. I'm buying them directly from Intrax, I'm not UK-based. I guess one can contact Intrax for advice on settings?

[shimmy]

Henk is the man.

Not sure if black Titan is worth it but don't buy aluminium damper bodies as they corrode against he steel clamps on uk roads oer time. Buy steel, stainless steel or black titan.

Easy to adjust, small centre adjusters on rears (50 clicks) and large collar adjuster on front (40 clicks)

With 100F and 50R springs Adjust from hard around 20F and 25R for uk roads (half way) and down to about 9F and 12 R at Silverstone. I kept Donny, Oulton etc about 12F 15R ish. If wet knock it back to road settings.

At the Ring Curly used to have his -18F and -22 R all from hard.

Typical springs rates are 100F/50R, 120F,69R, 140F,70R. I have been using 100/50 as mine came with them but 120/60 is trAckday recommended and 140/70 of you have caged race beast and aren't bothered about road discomfort. Don't forget damper setting will change if you are using different springs to me.

[Porker]

Originally Posted by shimmy

Henk is the man.

Not sure if black Titan is worth it but don't buy aluminium damper bodies as they corrode against he steel clamps on uk roads oer time. Buy steel, stainless steel or black titan.

Easy to adjust, small centre adjusters on rears (50 clicks) and large collar adjuster on front (40 clicks)

With 100F and 50R springs Adjust from hard around 20F and 25R for uk roads (half way) and down to about 9F and 12 R at Silverstone. I kept Donny, Oulton etc about 12F 15R ish. If wet knock it back to road settings.

At the Ring Curly used to have his -18F and -22 R all from hard.

Typical springs rates are 100F/50R, 120F,69R, 140F,70R. I have been using 100/50 as mine came with them but 120/60 is trAckday recommended and 140/70 of you have caged race beast and aren't bothered about road discomfort. Don't forget damper setting will change if you are using different springs to me.

Hi Shimmy,

Thanks for the wealth of info!

I have specifically requested trackday/ring springs/settings so I'm assuming I will get the 120/60 springs.

Have you been happy with your choice for Intrax? If I'm not mistaken you are the one with the 2'49" Spa-lap? Can't wait to have a go at that, I've refused to go to Spa on my PSS10-suspension, I'm assuming on Intraxes it will be a blast...

[shimmy]

Originally Posted by Porker

Hi Shimmy,

Thanks for the wealth of info!

I have specifically requested trackday/ring springs/settings so I'm assuming I will get the 120/60 springs.

Have you been happy with your choice for Intrax? If I'm not mistaken you are the one with the 2'49" Spa-lap? Can't wait to have a go at that, I've refused to go to Spa on my PSS10-suspension, I'm assuming on Intraxes it will be a blast...

I've got some 120/60 to try for next year, but otherwise I'm happy. They work fantastically on the e46

They are however race dampers and not maybe as long term reliable as road dampers. I've had mine refurbished. I know some had had fronts seize after a period parked up and a couple of knockings on rears

I would nt change though and mine have covered 50k miles

[conleth m3]

Originally Posted by Porker

I have specifically requested trackday/ring springs/settings so I'm assuming I will get the 120/60 springs.

i requested this from henk and got 100/50 springs which i found fantastic. i ran them as shimmy says half way (20/25) for road. i softened them off by 5 clicks for the 'ring though rather than hardened them up from road settlings. just felt better for me over the kerbs/bumps of the nordschleife. but then for smoother circuits like donny/spa would harden them 5-7 clicks from midway both front + rear. suppose only had them on the car for 6 months before i sold the csl so didnt have as much time to play with the settings as others

maybe i'm just a gayer and prefer it softer

mine still for sale though, not actually tried to sell them to be honest. still got the idea of a cheap e46m3 stripped/caged and with all the bits i took of my csl as a trackslag to complement the gt3