M3 4 pot full BBK set up

s.mac · 07-03-2011, 07:20 PM

Hi all, for any E46 M3 drivers you know, if you can pass the word around, they would fit a CSL but you would need to buy the front bracket ( I can point you in the right direction) I will not split though therefore this is really for an M3 owner to take all

For Sale £1,500.00 no offers

I have finally found the time to put my old BBK up for sale.

I used this on my old m3 and took it off prior to selling the car.

It is Rotora branded. They were originally silver with Brembo decals but I had them refinished in yellow with new carbon fibre finish decals.

They have new seals, bleed nipples / piping etc. I am also supplying brand new stainless steel hoses x 4. Plus new pads all round.
I didn't like the original pads and found better pads. I have supplied mintex but you can upgrade to pagid / hawk/ EBC etc and I will let you know the pad shape, the pads I use need 1mm taking off the sides, this is common practice and a 2 min job. The ones supplied are ready to go straight in (Questmead can do this for you if you are not familiar with this). Questmead are my preferred supplier.
I also used performance friction brake discs front and rear, they are OEM size discs, if you don't want to use them you can stick with your OEM disks ( I will not be splitting in the sale)
I had the discs blasted as they had surface rust from being stood in my garage. I had the front bells re anodised and the rears cleaned off.Ive nearly finished putting the hubs on the discs, they will be finished.
I think I have listed everything

These are NOT 100% mint, they have been used before! although I hope enough of you know me to know I have a bit of OCD (not as much as Rob

)
I live in Leeds and am more than happy for a potential buyer to view, in fact I would prefer it.

funtime · 07-03-2011, 07:25 PM

Bargain, looks immaculate mate - i'll pop it on cutters for you

funtime · 07-03-2011, 07:31 PM

M3 Cutters...

s.mac · 07-03-2011, 07:34 PM

cheers

funtime · 07-03-2011, 07:55 PM

Quote:

Originally Posted by s.mac

cheers

No worries, certiantly get some views on there though - I didn't really read your description and advertised them as a "Brembo BBK for £1500"

Ooops!

s.mac · 07-03-2011, 08:13 PM

It makes no odds really, they are Alcon copy, Aston Martin and F40 use them from the research I did

07-03-2011, 07:20 PM	#1
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	M3 4 pot full BBK set up Hi all, for any E46 M3 drivers you know, if you can pass the word around, they would fit a CSL but you would need to buy the front bracket ( I can point you in the right direction) I will not split though therefore this is really for an M3 owner to take all For Sale £1,500.00 no offers I have finally found the time to put my old BBK up for sale. I used this on my old m3 and took it off prior to selling the car. It is Rotora branded. They were originally silver with Brembo decals but I had them refinished in yellow with new carbon fibre finish decals. They have new seals, bleed nipples / piping etc. I am also supplying brand new stainless steel hoses x 4. Plus new pads all round. I didn't like the original pads and found better pads. I have supplied mintex but you can upgrade to pagid / hawk/ EBC etc and I will let you know the pad shape, the pads I use need 1mm taking off the sides, this is common practice and a 2 min job. The ones supplied are ready to go straight in (Questmead can do this for you if you are not familiar with this). Questmead are my preferred supplier. I also used performance friction brake discs front and rear, they are OEM size discs, if you don't want to use them you can stick with your OEM disks ( I will not be splitting in the sale) I had the discs blasted as they had surface rust from being stood in my garage. I had the front bells re anodised and the rears cleaned off.Ive nearly finished putting the hubs on the discs, they will be finished. I think I have listed everything These are NOT 100% mint, they have been used before! although I hope enough of you know me to know I have a bit of OCD (not as much as Rob ) I live in Leeds and am more than happy for a potential buyer to view, in fact I would prefer it. Last edited by s.mac; 11-03-2011 at 08:33 PM. Reason: put the discs on the bells

07-03-2011, 07:25 PM	#2
funtime S5, Sport Off, DSC M-track Join Date: Apr 2010 Location: Sussex Posts: 613 Casino cash: $5830	Bargain, looks immaculate mate - i'll pop it on cutters for you

07-03-2011, 07:31 PM	#3
funtime S5, Sport Off, DSC M-track Join Date: Apr 2010 Location: Sussex Posts: 613 Casino cash: $5830	M3 Cutters...

07-03-2011, 07:34 PM	#4
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	cheers

07-03-2011, 08:13 PM	#6
s.mac CSL Register Uber-poster! Join Date: Jun 2008 Posts: 4,247 Casino cash: $15600	It makes no odds really, they are Alcon copy, Aston Martin and F40 use them from the research I did