Exciting carbon news!

[Mike R]

Given my car is off the road waiting for the cams from BMW (a wait which has been on-going since the end of July ), I thought I would take the opportunity to get my guy to do some more carbon bits, so the Vorsteiner front splitter is going to be replicated (but in proper 1 x 1 pre-preg carbon and not the shonky carbon skin over glass fibre mix that is the Vorsteiner item). He also has the strut brace as a feasibility study - not sure if that would be a bit OTT - what are people's views?

But look what also fits in the Autoclave :


So the plan will be to take a mold of that as well and we will then have the ability to produce EXACT replicas (indistinguishable from the BMW items) of the bumper for considerably less than BMW charge. I appreciate that these are not likely to be required just yet, but if the bumpers go the same way as the roof, then at least the mold will be ready and waiting .

In addition, the rear centre consoles go in to production this week . These are going to be complete replacement items for the OE items (not covers), will not require any exchange and will allow you to keep your original one (if it hasn't yet cracked ) in pristine condition, as these are now £1,025 from BMW . Being full carbon (NOT carbon skin over glass-fibre), not only are they stronger anyway, but they will be additionally reinforced around the area where the OE plastic ones usually crack, to ensure that the carbon ones can allow the use of the folding seat arrangement without damaging them. All you will have to do is swap over the trim pieces (which are still available new from BMW separately from the plastic console if your ones are manky, but the plastic console is not available without the trim pieces - go figure ). For anyone concerned, we have a genuine front centre console that is being used to ensure that the curing process gives the exact same finish as the OE ones and match in every regard (as will be evidenced by the photos).

The price will be £495 + £10 delivery (within the UK) for the first 10. Again, these will only be available to forum members and £10 from the sale of each one will go to help running the site . As soon as the first one is done, I will of course post up pictures. However, they will be of similar quality to the flippers (as in better than OE ones).

[Chappers]

put me down for a rear centre console please

1. Chappers

[Bounce]

Might be interested in a rear console

[Marv968]

put me down for a rear centre console please

1. Chappers
2. Marv

[s.mac]

A bit off topic and I have emailed our resident carbon guy....
I've got a knackered plastic dash from a Clio cup. Looking for a fibre glass or carbon copy getting made up as a replacement. Is it something your guy can do? If so what sort of money?

It's just a thin plastic trim, i would like it with no pod opening.
Usual upside down photo...

[cslsuperfan]

Mike

would be interested in the vorsteiner nose

[Mike R]

Originally Posted by s.mac

A bit off topic and I have emailed our resident carbon guy....
I've got a knackered plastic dash from a Clio cup. Looking for a fibre glass or carbon copy getting made up as a replacement. Is it something your guy can do? If so what sort of money?

It's just a thin plastic trim, i would like it with no pod opening.
Usual upside down photo...

Everything can be done - but obviously it is whether or not if it is economically viable. I've asked the question, but I don't think he has time to do one offs.

[jupe777]

Originally Posted by Mike R

Given my car is off the road waiting for the cams from BMW (a wait which has been on-going since the end of July )

Mike, have you had any news on the cams? Mine went down about the same time, one cam was available immediately and the second thankfully came in yesterday. Car is back with them now and should be ready Monday :-). This was a few days after I was told it would be sometime in 2016 so was shocked when it was all of a sudden available?