PF Discs

[DazBlackCSL]

Advice really and part no's

Only ever had AP disc's on my AP's front and rear so have idea whether the PF ones are better / worse or the same ( not had any issues with the AP's to date so no cracks etc )

Gonna be needing front and rear solutions pretty soon for the 2010 silly season, so what do you lot of CSL driving ... register posting... track sliding .. wheel cleaning .. carpet munching Mo Fo's recommend for disc solutions !!


Ta

[TMAQ]

i haven't had a chance to use my PF discs properly yet (on a track). i had AP discs before and they compare similar so far for road use. i went for the PF disc as generally people rate them better over the AP ones, less prone to crack, warp and melt .

front PF front discs part numbers 356.32.0054.03 & 04.

you will need the bolt/washer kit x2 as well - CP3845-101K12

not sure about the rears, i have OEM.

[DazBlackCSL]

Sweet cheers ... will see what the other looneys say on the rears etc

[Thorney]

There is no PF option for the rear.

[s.mac]

You can still get rears for the PFs but they have stopped making them now as the demand is not that high. Which I think is shit when they do one for the E46 M3 fronts and also the AP Upgrade for the E46 M3 & CSL.

I have them on and I have been very happy with them although I need to get some new ones. The only other thing about the rears is they are dimpled so wont match the front grooved design. If you need part numbers I will dig them out for you.

Tarox do the F2000 disk that might be worth a look. The Stoptech one is a lot heavier than other options out there

The replacements PFs are £120 each although you would need the bell as well which would be a bit more

[DazBlackCSL]

Originally Posted by s.mac

You can still get rears for the PFs but they have stopped making them now as the demand is not that high. Which I think is shit when they do one for the E46 M3 fronts and also the AP Upgrade for the E46 M3 & CSL.

I have them on and I have been very happy with them although I need to get some new ones. The only other thing about the rears is they are dimpled so wont match the front grooved design. If you need part numbers I will dig them out for you.

Tarox do the F2000 disk that might be worth a look. The Stoptech one is a lot heavier than other options out there

The replacements PFs are £120 each although you would need the bell as well which would be a bit more

Tarox ones might be worth a look, must be a reasonable option ?

Thanks JT that rules out PF for the rear then if there no longer or not available unless there is someone with a stash

So looking likey I might have to go AP again if no other proper all round option ( and easier )