Removing front bumper

[Jaw_F430]

Just before I go and do it are there any hidden bolts

[Jaw_F430]

http://www.realoem.com/bmw/showparts...18&hg=11&fg=40

#7 on this pic was missing so ordered one last week and just tried to fit it by removing the intake but cannot get down to tighten the clip once the pipe is in place

[sailorbaz]

I found, taking the inner wing lining off, gave me better access. You can fit that last after the bumper is back on.

Don't suppose you know how much the part that connects 15 to the bumper costs as mine is pretty gubbed?

[Jaw_F430]

Originally Posted by sailorbaz

I found, taking the inner wing lining off, gave me better access. You can fit that last after the bumper is back on.

Don't suppose you know how much the part that connects 15 to the bumper costs as mine is pretty gubbed?

Thats what I did in the end. Was easier to remove the inner wing lining than remove the bumper

Do you mean #21 in this pic? http://www.realoem.com/bmw/showparts...97&hg=51&fg=15


If it is should be around £37