Geniune 18" E46 M3 Alloys

billyboysm3 · 29-09-2011, 08:47 AM

As above will these fit on the csl with AP's.

Theres loads about going cheap that I could put decent tyres on for TD use to save ruining my nearly new eagle F1's.

Or try and get a couple of more rears to put on the front and run square set up?

Billy

breeze · 12-10-2011, 10:59 PM

It think it depends on which AP caliper you have.

One will fit the 18" factory wheels with no problems, the other will require a spacer.

**shimmy** · 13-10-2011, 12:09 AM

Quote:

Originally Posted by breeze

It think it depends on which AP caliper you have.

One will fit the 18" factory wheels with no problems, the other will require a spacer.

Rears are ok,

cP5575 fit under 18s and cp5555 need spacers on front

billyboysm3 · 13-10-2011, 08:00 AM

Ive bought Matts ones, all 9j rears and fit fine, very close but all good.

mattCSLnut · 13-10-2011, 09:30 AM

Quote:

Originally Posted by shimmy

Rears are ok,

cP5575 fit under 18s and cp5555 need spacers on front

I'm guessing Billy must have the CP5575 APs as the 18" 9J went on a treat

billyboysm3 · 13-10-2011, 09:54 AM

picture

**shimmy** · 13-10-2011, 10:06 AM

The cp5555 would hit the spokes Billy and not the outside rim. AP basically cut soe off the width to get the callipers under the 18 inch rims

billyboysm3 · 13-10-2011, 12:10 PM

Quote:

Originally Posted by shimmy

The cp5555 would hit the spokes Billy and not the outside rim. AP basically cut soe off the width to get the callipers under the 18 inch rims

I get ya.

Billy

_Nathan_ · 13-10-2011, 01:21 PM

Quote:

Originally Posted by shimmy

The cp5555 would hit the spokes Billy and not the outside rim. AP basically cut soe off the width to get the callipers under the 18 inch rims

Probably not with a rear wheel on the front though?

northernjim · 13-10-2011, 03:44 PM

Quote:

Originally Posted by _Nathan_

Probably not with a rear wheel on the front though?

+1

29-09-2011, 08:47 AM	#1
billyboysm3 CSL Register Uber-poster! Join Date: May 2011 Posts: 3,001 Casino cash: $25206	Geniune 18" E46 M3 Alloys As above will these fit on the csl with AP's. Theres loads about going cheap that I could put decent tyres on for TD use to save ruining my nearly new eagle F1's. Or try and get a couple of more rears to put on the front and run square set up? Billy

13-10-2011, 10:06 AM	#7
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	The cp5555 would hit the spokes Billy and not the outside rim. AP basically cut soe off the width to get the callipers under the 18 inch rims __________________ .

12-10-2011, 10:59 PM	#2
breeze S3 - On the open road Join Date: Oct 2008 Posts: 102 Casino cash: $5788	It think it depends on which AP caliper you have. One will fit the 18" factory wheels with no problems, the other will require a spacer.

13-10-2011, 08:00 AM	#4
billyboysm3 CSL Register Uber-poster! Join Date: May 2011 Posts: 3,001 Casino cash: $25206	Ive bought Matts ones, all 9j rears and fit fine, very close but all good.