CSL Register - Best Place to buy Compomotive Alloys

Page 1 of 2

Show 40 post(s) from this thread on one page

CSL Register (http://www.cslregister.com/forum/index.php)

- Technical Area (http://www.cslregister.com/forum/forumdisplay.php?f=16)

- - Best Place to buy Compomotive Alloys (http://www.cslregister.com/forum/showthread.php?t=8959)

Mark CSL

12-08-2012 11:00 AM

Best Place to buy Compomotive Alloys

3 Attachment(s)

I tried Derek’s wheels over my brakes and there is enough clearance over the 380mm discs and calipers its close but they fit

So the search is on to source a set of 18" and slicks :supz:

shane@mbtech

12-08-2012 11:39 AM

1 Attachment(s)

I can get you set. You want me to get you a price. What size and offset and colour Mark?

I went white, but might go black.

Attachment 6215

Mark CSL

12-08-2012 11:47 AM

Quote:

Originally Posted by lawsy (Post 119856)

I can get you set. You want me to get you a price. What size and offset and colour Mark?

I went white, but might go black.

Attachment 6215

Yes get me a price
I was looking at 9/18 and 10/18 ? what do you run ?
Silver or white :thumbs:

shane@mbtech

12-08-2012 12:10 PM

Quote:

Originally Posted by Mark CSL (Post 119857)

Yes get me a price
I was looking at 9/18 and 10/18 ? what do you run ?
Silver or white :thumbs:

I run 9 x 18 square set up. I think et 25 all round with 10mm spacer on rear. That way I can swap front to rear no issues. Tyres last longer this way.

Mark CSL

12-08-2012 12:23 PM

That sounds better so you can swop them around
Get a price for the same as yours

CraigMillwardCroft

12-08-2012 01:48 PM

Quote:

Originally Posted by Mark CSL (Post 119851)

I tried Derek’s wheels over my brakes and there is enough clearance over the 380mm discs and calipers its close but they fit

So the search is on to source a set of 18" and slicks :supz:

It that the 356 AP disk kit using the CP5575 setup, if so I could be interested in 18" rims too :thumbs:

shane@mbtech

12-08-2012 04:39 PM

Quote:

Originally Posted by CraigMillwardCroft (Post 119863)

It that the 356 AP disk kit using the CP5575 setup, if so I could be interested in 18" rims too :thumbs:

Mark runs stoptech. 380mm. They will clear you AP with ease.

CraigMillwardCroft

12-08-2012 04:51 PM

Quote:

Originally Posted by lawsy (Post 119874)

Mark runs stoptech. 380mm. They will clear you AP with ease.

I will look at your setup at Donington and get prices please :-D

Equinox

12-08-2012 10:33 PM

I run a set of staggered 18" MO'6 s on the E36 in black, they are amazing and look great tight on the rear arches with Eibach springs and 255 tyres but its and amazing set up with B6's

83SY	13-08-2012 08:23 AM

Love these wheels! Would have to be in the White for me. Roughly how much for a set? 18inch.... Considering a set for slicks

All times are GMT +1. The time now is 11:13 PM.

Page 1 of 2

Show 40 post(s) from this thread on one page