CSL Register

CSL Register (http://www.cslregister.com/forum/index.php)
-   Technical Area (http://www.cslregister.com/forum/forumdisplay.php?f=16)
-   -   Stuck Wheel ! (http://www.cslregister.com/forum/showthread.php?t=7520)

Yanto 18-09-2011 05:05 PM

Stuck Wheel !
 
Intended on switching to spare rims / PS2's for the winter today and spent about a fookin hour tring to free the wheel up (yes....I did take the nuts out fookers)...

Its the front one I had recently painted which may have something to do with it....

Put the might of my bulk (no jokes) behind it and the fooker wont budge....next step is a sledgehammer....

Any advice from the site Sages ??

Cups for another few days and off to Elite on Thurs if no sensible answers :hahaha:

Whilst on the subject.....while tyres have been off the car (6 months), one of them has lost c. 5-6 psi (now 24)...normal or v.slow puncture ?

shimmy 18-09-2011 05:06 PM

Task it out for a spirited run and get it warm (make sure nuts tightened first) and then try to remove whilst still hot
As for psi, probably a slow puncture or loosing ari between tyre and rim if not mounted properly, or valve leaking.

I'm in a bit this week if you need some help getting wheel off.....I have a big sledge hammer :)

_Nathan_ 18-09-2011 05:07 PM

Make sure jack is very secure - rubber mallet on in side of wheel rim, rotate 90 degrees and same again, repeat with increasing levels of violence until off.

Yanto 18-09-2011 05:13 PM

Thx Guys. Shim, if you're about on Thursday, may stop by for a morning cuppa ?

In fact, per previous offer, I may leave the spare rime at yours mate save the agg from missus as they sit in the corner of the front room :hahaha::thumbs:

shimmy 18-09-2011 05:16 PM

Quote:

Originally Posted by Yanto (Post 99262)
Thx Guys. Shim, if you're about on Thursday, may stop by for a morning cuppa ?

In fact, per previous offer, I may leave the spare rime at yours mate save the agg from missus as they sit in the corner of the front room :hahaha::thumbs:

I'm in Thursda morning def, and spare set no worries mate, seriously. :thumbs:

shimmy 18-09-2011 05:17 PM

Quote:

Originally Posted by Yanto (Post 99262)
Thx Guys. Shim, if you're about on Thursday, may stop by for a morning cuppa ?

In fact, per previous offer, I may leave the spare rime at yours mate save the agg from missus as they sit in the corner of the front room :hahaha::thumbs:

I'm in Thursda morning def, and spare set no worries mate, seriously. :thumbs:

I found Bealos 4x Saab wheel bags so you can have them if you want :hahaha:

Yanto 18-09-2011 05:22 PM

Quote:

Originally Posted by shimmy (Post 99264)
I'm in Thursda morning def, and spare set no worries mate, seriously. :thumbs:

I found Bealos 4x Saab wheel bags so you can have them if you want :hahaha:

Ta mate - I'll bell you Wed :thumbs:

I'll contribute to Bealo's ladyboy fund :gayfight:

shimmy 18-09-2011 05:53 PM

Quote:

Originally Posted by Yanto (Post 99265)
Ta mate - I'll bell you Wed :thumbs:

I'll contribute to Bealo's ladyboy fund :gayfight:

Bealos says deposits all welcomed apparently :)

DuncanR 18-09-2011 08:06 PM

Ian , no fookin about we a toffee ammer, wallop the wheel on the tyre, thats the black rubbery bit, at the bottom save missing we sledge and wacking wing ! ... seriously, that will come off then, dont belt the rim obviously, alternatively, stick a lump of wood against the tyre first and wallop that !:thumbs:

olly22n 19-09-2011 01:10 PM

Quote:

Originally Posted by _Nathan_ (Post 99261)
Make sure jack is very secure - rubber mallet on in side of wheel rim, rotate 90 degrees and same again, repeat with increasing levels of violence until off.

Remember to leave a couple of nuts on loosely, in case it does com free..


All times are GMT +1. The time now is 12:46 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(c)www.wickedwifi.co.uk