CSL Register

CSL Register (http://www.cslregister.com/forum/index.php)
-   Wanted (http://www.cslregister.com/forum/forumdisplay.php?f=11)
-   -   Rear drivers ap caliper for e46 m3 (http://www.cslregister.com/forum/showthread.php?t=12873)

derek 15-01-2015 08:44 PM

Rear drivers ap caliper for e46 m3
 
As per title please contact me if you have one for sale brake nipple snapped in mine

rstoughy 15-01-2015 09:05 PM

Aw shite mate, no way you can get it out?
I've done a few over the years so can have a go if you like? there are some however that are right bastards to remove.

derek 15-01-2015 09:22 PM

Quote:

Originally Posted by rstoughy (Post 177978)
Aw shite mate, no way you can get it out?
I've done a few over the years so can have a go if you like? there are some however that are right bastards to remove.

It's also got an easy out snapped in it, I did put a lot of heat in it before using an easyout hoping it would move I have drilled most of it out can only have couple of mm's of easy out left. Just getting fed up and keep breaking drills

trackm3 15-01-2015 09:48 PM

Derek

There not to expensive new from memory.

derek 15-01-2015 10:22 PM

Quote:

Originally Posted by trackm3 (Post 177981)
Derek

There not to expensive new from memory.

Hi Martin do you sell them if so please supply quote cheers

trackm3 16-01-2015 08:27 AM

Quote:

Originally Posted by derek (Post 177986)
Hi Martin do you sell them if so please supply quote cheers

Derek What colour caliper is it ?

trackm3 16-01-2015 08:58 AM

Derek, Black calipers cost £386 inc VAT In Stock at AP.

s.mac 16-01-2015 09:47 PM

You can get inserts put in Derek, then the nipples sit in the inserts

shimmy 16-01-2015 11:40 PM

Quote:

Originally Posted by s.mac (Post 178044)
You can get inserts put in Derek, then the nipples sit in the inserts

this

my second set was fixed for £50 by Simpsons with insert and smaller nipple

derek 31-01-2015 09:39 PM

Quote:

Originally Posted by trackm3 (Post 177997)
Derek, Black calipers cost £386 inc VAT In Stock at AP.

Hi Martin pm send fed up drilling


All times are GMT +1. The time now is 08:23 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(c)www.wickedwifi.co.uk