NZ_M3 |
07-06-2013 12:25 PM |
Quote:
Originally Posted by Pooky
(Post 147143)
I cant see it ever being as good as the original. Has anyone had this done to a high standard and who did it?
|
To be honest the original paint on the carbon bumpers were absolute rubbish - so long as you use the same paint system as BMW did it'll be better instead of worse in my opinion.
Original paint is over-rated. Paint is paint ... mass produced painted parts are never as good as quality hand painted parts - period.
Just use the Glasurit colour system - which is what BMW uses to paint its cars - you'll get the exact same finish and with a better primer than originally used on carbon components.
Just tell the painter to use a grey undercoat primer and not white - to keep originality.
A08 has gone through a few changes however and the formula has changed 3 or 4 times now as the original tint is no longer produced - it shouldn't matter as the bumpers were never ever the same colour as the body as they were all painted in different batches to the main chassis and never really matched properly.
I would rather have fresh new quality paint over original chipped to hell paint. Prep work is important and sanding back to primer is a must.
|