CSL Register - who can clear wrap my wing mirrors?

Page 1 of 3

Show 40 post(s) from this thread on one page

CSL Register (http://www.cslregister.com/forum/index.php)

- Main Message Centre (http://www.cslregister.com/forum/forumdisplay.php?f=8)

- - who can clear wrap my wing mirrors? (http://www.cslregister.com/forum/showthread.php?t=10161)

shimmy

05-04-2013 10:59 PM

who can clear wrap my wing mirrors?

just being repainted and I need some ventureshield or simlar!

anybody?

Bounce

05-04-2013 11:24 PM

1 Attachment(s)

Try this:-D

shimmy

05-04-2013 11:26 PM

A Cornish condom!

Not surprised you have so much left!

shane@mbtech

06-04-2013 12:19 AM

Quote:

Originally Posted by shimmy (Post 140098)

A Cornish condom!

Not surprised you have so much left!

Made me smile:hahaha:

MCSL	06-04-2013 08:10 AM

A friend of mine had his 360 CS (front) done by someone in Peterbourgh. I'll find out exactly who it was if you're interested? Not cheap, but job well done.

CraigMillwardCroft

06-04-2013 09:27 AM

Quote:

Originally Posted by Bounce (Post 140096)

Try this:-D

:hahaha::hahaha::hahaha:

CraigMillwardCroft

06-04-2013 09:28 AM

Quote:

Originally Posted by shimmy (Post 140098)

A Cornish condom!

Not surprised you have so much left!

He cannot tear off strips small enough without it getting into a mess :whistle:

E46CSL

06-04-2013 11:01 AM

The mirror curvature does make it difficult for a single piece to be fitted.

digi	06-04-2013 05:38 PM

buy a can of Plasti-Dip clear.

My stupid GTR has the horrid, misting up problem and its due to the glue between the lens and housing detaching. I used some clear Plasti-dip on the lens parimeter and its sealed. Stuff wicked, easy to use and cheap.

I Plasti-dipped the rear wing too (matt black) and save me a pretty penny in having it wrapped.

Bounce

06-04-2013 05:46 PM

Quote:

Originally Posted by CraigMillwardCroft (Post 140118)

He cannot tear off strips small enough without it getting into a mess :whistle:

it would make your Fookin eyes water.:finga:

All times are GMT +1. The time now is 03:36 AM.

Page 1 of 3

Show 40 post(s) from this thread on one page