CSL Register
Page 3 of 15 12 3 4513 Last »
Show 40 post(s) from this thread on one page

CSL Register (http://www.cslregister.com/forum/index.php)
-   Technical Area (http://www.cslregister.com/forum/forumdisplay.php?f=16)
-   -   Schrick (http://www.cslregister.com/forum/showthread.php?t=12727)

billyboysm3 08-11-2014 02:03 PM
Quote:
Originally Posted by alexk (Post 175758)
Shall we all order cams so as they finally produce them ?

I will order a set so as I have them in 2 years.
Yes we do need to. I'm going to order a set

Marv968 08-11-2014 02:05 PM
How much are they for a pair?

adem.csl 08-11-2014 02:56 PM
Quote:
Originally Posted by billyboysm3 (Post 175759)
Your basically screwed. But it if schrick are making them then hopefully you won't have a long wait. But least you get courtesy car over winter.

So maybe after a 16 month wait the car will be ready to drive in the snow.
Could you imagine me waiting 16 months? I would hire a mini bus get a load of big Turks run to germany and lift that museum piece out and say you can have it when i get my cams!

cslsuperfan 08-11-2014 05:00 PM
Quote:
Originally Posted by adem.csl (Post 175763)
Could you imagine me waiting 16 months? I would hire a mini bus get a load of big Turks run to germany and lift that museum piece out and say you can have it when i get my cams!
Adem

you mentioned earlier your cams might need replacing

What are the symptoms? other than the obvious knocking

Is there a subtle issue that is the beginning of a cam problem.

_Nathan_ 08-11-2014 09:21 PM
I thought CSL cams were 272/280?

If someone wants to buy me some shrick cams I'll do a swap with my CSL ones :thumbs:

Monkey 09-11-2014 09:14 AM
Last time I got some CSL cams from Shrick they said they were in stock on ordering, then ended up waiting 4 months I think. Still quicker than BMW though!

Neil M 09-11-2014 11:21 AM
http://www.ebay.co.uk/sch/i.html?_fr...+cams&_sacat=0

adem.csl 09-11-2014 11:57 AM
Quote:
Originally Posted by cslsuperfan (Post 175766)
Adem

you mentioned earlier your cams might need replacing

What are the symptoms? other than the obvious knocking

Is there a subtle issue that is the beginning of a cam problem.
Ive developed an erratic idle that drops low enough to almost cut out but no it starts with a slight tick 3-5 times then clears.as it gets hot the ticking becomes more regular into a full on loud tap as if hitting 2 spoons together!

Don't forget this happened at 70k due to oil starvation top end so at 74k i know exactly whats about to happen so i nursed the car home by that time it was too late.this is what you get when you fit a worn cam to new rockers!poor show bmw thanks again!!

adem.csl 09-11-2014 12:01 PM
Quote:
Originally Posted by _Nathan_ (Post 175771)
I thought CSL cams were 272/280?

If someone wants to buy me some shrick cams I'll do a swap with my CSL ones :thumbs:
You are correct.martin trackm3 has found valuable info that backs this up so the 280/288 are the upgrade and not stock csl profile.otherwise who would spend £2k with schrick for stock cams in a csl
http://www.turnermotorsport.com/p-38...25mm-lift.aspx

adem.csl 09-11-2014 12:13 PM
Quote:
Originally Posted by Monkey (Post 175775)
Last time I got some CSL cams from Shrick they said they were in stock on ordering, then ended up waiting 4 months I think. Still quicker than BMW though!
Did you order direct from schrick?


All times are GMT +1. The time now is 03:29 AM.
Page 3 of 15 12 3 4513 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(c)www.wickedwifi.co.uk