Csl plaque please can anyone help!

[Csl spurs]

Hi all I'm desperate to get a csl plaque please can anyone help? I have tried the BMW route but because they issued one to the car when new they won't issue another or sell me another does anybody have one for sale thanks Paul.

[s.mac]

Try Mark :)

sorry Mark CSL

[Bounce]

Or ask Lawsy if he has one in the Csl he is selling for parts;)

[Csl spurs]

Try Mark :)

sorry Mark CSL
Thankyou I will send him a message

[Csl spurs]

Or ask Lawsy if he has one in the Csl he is selling for parts;)
I've sent him a message Thankyou.

[John]

Hi all I'm desperate to get a csl plaque please can anyone help? I have tried the BMW route but because they issued one to the car when new they won't issue another or sell me another does anybody have one for sale thanks Paul.

I asked BMW the very same thing on Friday past and they got back to me today to say there was one issued previously. Now the parts supplier at my local garage said he'd press BMW for a replacement one but now reading your post I'm concerned I'll not get one.

If I can't get from BMW I'll be putting a shout out for one too. I don't see why they can't re-issue these, it's an integral part of the car IMO.

[Csl spurs]

I asked BMW the very same thing on Friday past and they got back to me today to say there was one issued previously. Now the parts supplier at my local garage said he'd press BMW for a replacement one but now reading your post I'm concerned I'll not get one.

If I can't get from BMW I'll be putting a shout out for one too. I don't see why they can't re-issue these, it's an integral part of the car IMO.

My dealer came back to me today also and said they wouldnt re-issue one because one had been supplied for the car which I think is crazy it's like a boot badge coming off and not being able to buy another! Let me know how you get on :thumbs:

[martin770]

I have seen a couple go on ebay but have sold for silly money :bigcry:
Swap mine for ap brakes !!! LOL !!!!

[Csl spurs]

I have seen a couple go on ebay but have sold for silly money :bigcry:
Swap mine for ap brakes !!! LOL !!!!
Sounds a fair deal shall I chuck in my gruppe m titanium exhaust as well!

[John]

Can anyone confirm the dimensions of the plaque?

[Bounce]

Can anyone confirm the dimensions of the plaque?Without measuring,roughly 75mm by 25mm

[shane@mbtech]

Without measuring,roughly 75mm by 25mm

Last time you had your penis out in your car, you got arrested:hahaha:

[Bounce]

Last time you had your penis out in your car, you got arrested:hahaha::birdman:;)

[Bounce]

Last time you had your penis out in your car, you got arrested:hahaha:I told your lass not to say anything:-D

[shimmy]

Last time you had your penis out in your car, you got arrested:hahaha:

I'm drunk but I still pissed myself. :thumbs::hahaha:

[Yanto]

Afterthought by BMW and really not worth it. I got one but only because car hadn't been allocated one. I'll keep mine with history file, but wouldn't have paid for one. I think they fetch £150ish. Put the ££ towards a TD or spearmint :thumbs:

[Steve B]

Has anyone got a part number for it so I can ask my dealer as my car doesn't have 1...

:beer:
Steve

[mattCSLnut]

Has anyone got a part number for it so I can ask my dealer as my car doesn't have 1...

:beer:
Steve
Unfortunately there is no part number for these as it was a BMW afterthought.

[Neil M]

Sorry to lower the tone of the thread, but these are the people who manufacture the Golf Anniversary Plaques: http://www.fxuk.net/services.aspx?url=vehicle-badging

If yours is missing you simply phone VW and they supply a replacement free of charge.
However they will not supply it with the original number ? The new number assigned is a above 1800, which was the quantity produced eg New No. 1843.

You could try them, or ask Elms in Cambridge if they can help you out. Tel: 0844 326 7250 You could also PM giraffe, see what he has to say.

[martin770]

Im a locksmith but we do engraving at our shop, I could make a replica but it would be engraved not laser etched, It will be close but not exact, Let me know if you have no luck. :wink:

[CraigMillwardCroft]

Last time you had your penis out in your car, you got arrested:hahaha:
:hahaha::hahaha::hahaha:

[Neil M]

Hi all I'm desperate to get a csl plaque please can anyone help? I have tried the BMW route but because they issued one to the car when new they won't issue another or sell me another does anybody have one for sale thanks Paul.

This is as it came with the car originally (Now with added Dims: 70mm. x 23mm.):

[Loaded]

I believe that if you go to your local BMW dealer and give him your VIN number, he will be able to find/bring you another CSL plaque...

[martin770]

I have engraved your plaque and posted, let me know what you think :-D

[Neil M]

Slightly larger version of Plaque for ref:

[CraigMillwardCroft]

Looks very good :thumbs:

[Bounce]

Looks very good :thumbs:Think that's the pic of an original one Craig.:wink:

[CraigMillwardCroft]

Think that's the pic of an original one Craig.:wink:
That's why it looks soooo good :banghead:

[Steve B]

Anyone with a cnc milling machine could copy those 100% accurately.... My father in law has made some superb 1 offs out if alloy and polished then up.


Steve

[Bounce]

Anyone with a cnc milling machine could copy those 100% accurately.... My father in law has made some superb 1 offs out if alloy and polished then up.


SteveGet some pics up Steve,lets have a look at them:wink:

[Steve B]

Get some pics up Steve,lets have a look at them:wink:

A calculator he made an alloy case for (basically took the innerds out and put in a new case)

http://img.photobucket.com/albums/0603/Steve%40RSx/AA5FC4A9-AA7D-4182-8C44-048AE52456FF-578-00000057649FB6A2.jpg

Couple of name plaques for the kids (could do with a repolish as they are old)

http://img.photobucket.com/albums/0603/Steve%40RSx/D4A92DF2-8B0B-460C-826A-E023A8D63173-578-000000575EB8F308.jpg

http://img.photobucket.com/albums/0603/Steve%40RSx/36F9C1C3-3A9A-4F86-B6D7-32CF752ACA1B-578-0000005758E843F7.jpg

[Neil M]

Anyone with a cnc milling machine could copy those 100% accurately.... My father in law has made some superb 1 offs out if alloy and polished then up.


Steve

You'll have to ask to have a go at replicating yours.
I think the base material maybe 1mm. highly polished Stainless Steel or Chromed Alli. but I'm guessing, he would probably know.

[Steve B]

If I had 1 that's exactly what I'd be doing.... My local dealer is useless and didn't have a clue what I was on about so I gave up.


Steve

[thrashermax]

I have engraved your plaque and posted, let me know what you think :-D

Do you make replicas? Are they the same size as the OEM part?

[Steve B]

Well I've had some good news.....

My car has never had a plaque assigned to it so I'll have 1 in the new year, I should now be able to get them reproduced by my father in law......


Steve:smokin: