spacers

[monkeycsl]

I bought some 10mm spacers for my csl a couple of years ago from thorney motorsport along with mcguard locking wheel bolts and a oil service and geo setup.After seeing the disclaimer from eibach about 10mm not suitable for the e46 m3 and 12mm are suitable i rang them to ask why i was supplied with the incorrect spacers and could they replace them with the correct 12mm ones you guessed it no chance.They knew what car they were going on as its on the invoice, not happy with them after ringing them about 4 times and being told someone will get in contact with you and still no reply.I know its a small issue but they now lost any of my business in the future.

[s.mac]

I have 10mm H&R on the fronts and they are :smt023

[Bounce]

Ive got 10mm hubcentric spacers on the rear:wink:

[monkeycsl]

Its just the eibach 10mm ones that are not correct for the e46 m3 h&r and kw ect are fine wish i knew that a couple of years ago.:(

[CraigMillwardCroft]

What are the correct spacers for Standard CSL rims, and where can they be purchased from :thumbs:

[shimmy]

What are the correct spacers for Standard CSL rims, and where can they be purchased from :thumbs:

76mm core hub centric 5x120 spacers 10mm + (excluding Eibach 10mm)

[DuncanR]

10mm H & R here, been hammered all over and no problemo

[mattCSLnut]

I have 10mm H&R on the fronts and they are :smt023
I have a set of these as well (currently fitted @ the rear) and another set of 12mm H&R. Great quality and no issues :thumbs:

[CraigMillwardCroft]

It seems 10mm are okay, but where do I get them from, any part numbers and do they come with longer bolts. :thumbs:

[mattCSLnut]

It seems 10mm are okay, but where do I get them from, any part numbers and do they come with longer bolts. :thumbs:
The H&R ones are ;) :hahaha:
I got my 10 mm ones second hand form Shimmy and my 12 mm NEW form these guys: http://www.motorsportworld.co.uk/framefix.asp?productcode=HR-2475725&PID=613035
... they also have the 10 mm : http://www.motorsportworld.co.uk/framefix.asp?productcode=HR-2475725&PID=613035.

[CraigMillwardCroft]

Thanks for the info, looked them up they have the spacers but not the longer wheel bolts at the moment. :bigcry:

[mattCSLnut]

Thanks for the info, looked them up they have the spacers but not the longer wheel bolts at the moment. :bigcry:

I got my extended bolts for the second hand H&R 10 mm Shimmy rejects ;) from these guys: http://www.ca-int.co.uk/single_prod-cHJvZF9pZD00ODcmY2FyX21ha2U9Ym13JmNhcl90eXBlPWU0Nm 0mY2F0X2lkPTE5JmNvbXBfaWQ9OA==.html :thumbs:

[CraigMillwardCroft]

10mm H & R here, been hammered all over and no problemo
Can you run these all round (Front/Rear):-D

[DuncanR]

Can you run these all round (Front/Rear):-DUh yeah ! only 1 per. wheel though !:hahaha:

[CraigMillwardCroft]

Uh yeah ! only 1 per. wheel though !:hahaha:
:hahaha::hahaha::hahaha: Thanks for the reply. Now ordered take upto 5 days

[Bounce]

:hahaha::hahaha::hahaha: Thanks for the reply. Now ordered take upto 5 daysDont forget to get the longer bolts to go with them.;)

[shimmy]

Dont forget to get the longer bolts to go with them.;)

+ locking ones

[Bounce]

+ locking onesCan you get locking nuts in pairs,for different size spacers front and rear,or do you have to buy 4 of one size and 4 of t'other.:smt102

[CraigMillwardCroft]

Can you get locking nuts in pairs,for different size spacers front and rear,or do you have to buy 4 of one size and 4 of t'other.:smt102
Set of 4 and dearer than 20 bolts. :( but had to get them.

[shimmy]

Can you get locking nuts in pairs,for different size spacers front and rear,or do you have to buy 4 of one size and 4 of t'other.:smt102

in 4s

[Mark CSL]

There is a guy from glasgow sells them withn the bolts 15mm front and rear
£80+ postage i have them on my car

[CraigMillwardCroft]

Dont forget to get the longer bolts to go with them.;)
Bolts and locking wheel bolts have arrived, very good service and not black as they said. Still not heard from H & R as to when spacers will be despatched :(

[83SY]

I went for 12mm spacer recommended by Shimmy (many thanks)
Bought from Simpsons - delivered next day

Why 15mm ?

Also does anyone know the torque setting for CSL wheels...?
Please dont say f#cking tight :banghead:

[DuncanR]

Also does anyone know the torque setting for CSL wheels...?
Please dont say f#cking tight :banghead:Torque setting for wheel stud 88 ft/lb or 120NM +/- 10 actually according to BMW TIS. Plus a bit if on track.

[need4speed]

Also does anyone know the torque setting for CSL wheels...?
Please dont say f#cking tight :banghead:

http://www.cslregister.com/forum/showthread.php?t=7218&highlight=wheel+torque

[83SY]

Thank you :smokin:

[cslsuperfan]

got 15mm H&R spacers all round, demon tweeks in wrexham have extensive stock of longer wheel bolts.
£30 for 20 64mm bolts.

:thumbs:

[mickaldo]

There is a guy from glasgow sells them withn the bolts 15mm front and rear
£80+ postage i have them on my car
could you pm me his no please mark.

[Bounce]

got 15mm H&R spacers all round, demon tweeks in wrexham have extensive stock of longer wheel bolts.
£30 for 20 64mm bolts.

:thumbs:Shouldn't they be 41mm bolts for 15mm spacers,as standard are 26mm.

[cslsuperfan]

overall length stated. :thumbs:

[CraigMillwardCroft]

Just fitted my spacers and new bolts, car looks well sorted. :whistle: just got to get the GEO done again now.

[daniel]

Just fitted my spacers and new bolts, car looks well sorted. :whistle: just got to get the GEO done again now.

Shouldn't need a geo after spacers really, but if you do take it to Danny at Marlow Motorworx.

[83SY]

Ive just fitted some 12mm Eibach spacers all round..
Love the wide stance, shows over the camber :supz:

http://i1080.photobucket.com/albums/j322/83sy/016.jpg

[O'Neill]

Shoulda went 15mm:)

[CraigMillwardCroft]

Shouldn't need a geo after spacers really, but if you do take it to Danny at Marlow Motorworx.
Danny set it up last time, but got some usful info from the CSL lot at Silverstone last time, so going back to make the changes. :whistle: