Brake cooling issue

[ahtim]

Hi guys, i have SS brake hose, rs29 pads, new disc. one night we went out for a drive, had around 2-3 continuous hard brakes, then the brake fade at my next hard brake,
I think it is the brake with no cooling, even i install a BBK on it, it still has no brake cooling in the csl.

what do you guys do to the brake cooling?

i thought of this:
4459

[NZ_M3]

Best setup I've seen is a pair of NCA ducts on the bottom of the engine plastic tray with ducting out into the wheel well and behind the brake disc - very clean and functional and retains that OEM look.

[AlexGTT]

If you have done all you can with standard calipers, move to AP front kit or similar. That doesn't fade at all in my experience and most others on here.

[shimmy]

As Alex says if you go with front AP set up the extra cooking with the bigger ventilated discs are more than adequste

[northernjim]

when was the fluid last bled?

[DuncanR]

what do you guys do to the brake cooling?
Fit AP BBK all round, with PF discs up front ...cool as !:smokin:

[ahtim]

So you guys mean that no brake cooling is needed for this car?
I havent had the fluid change for 1year



I probably will go for the Alcon CSL cup setup from thorney if i do go for a BBK.

[AlexGTT]

So you guys mean that no brake cooling is needed for this car?
I havent had the fluid change for 1year



I probably will go for the Alcon CSL cup setup from thorney if i do go for a BBK.

Most prefer AP and you'll save a few $$. Honestly, you don't need anything more.;)

[karbonkid]

Most prefer AP and you'll save a few $$. Honestly, you don't need anything more.;)

+1 :thumbs:

[AMFCSL]

https://picasaweb.google.com/AMFCSL/CSL02?authuser=0&feat=directlink
https://picasaweb.google.com/AMFCSL/CSL4?authuser=0&feat=directlink

Ciao e buon lavoro!