Wheel bolts with spacers

[derek]

Hi ,
Looking for some advise on length of wheel bolts. I have 10 mm spacers on front and 15mm spacers on rear. Im replacing my locking wheel nuts( and existing bolts) as I once had to drill them out after a track day. My locking wheel nuts are currently +15mm on front and rear, the current rear wheel bolts are +20mm and the front wheel bolts are +10mm. In theory i should buy +10mm for front and +15mm for the rear. Is there any negative benefit from fitting +15mm on front and +20mm on rear.

cheers
Derek

[bigfoot]

Hi Derek

OE wheel bolts are 26mm so if you have 10mm spacers you will require 36mm bolts and for the 15mm spacers will require 41mm. Check out CA Automitive: http://www.ca-automotive.co.uk/single_prod-cHJvZF9pZD00ODcmY2FyX21ha2U9Ym13JmNhcl90eXBlPWU0Nm 0mY2F0X2lkPTE5JmNvbXBfaWQ9OA==.html (http://www.ca-automotive.co.uk/single_prod-cHJvZF9pZD00ODcmY2FyX21ha2U9Ym13JmNhcl90eXBlPWU0Nm 0mY2F0X2lkPTE5JmNvbXBfaWQ9OA==.html)
or give Roy/Phil a call.

Don’t use wheel bolts that are too long as on the rear they can pass into the parking brake drum and cause mayhem and the front they can interfere with sensors.

I hope that helps and good luck. :smt023

[derek]

Hi Derek

OE wheel bolts are 26mm so if you have 10mm spacers you will require 36mm bolts and for the 15mm spacers will require 41mm. Check out CA Automitive: http://www.ca-automotive.co.uk/single_prod-cHJvZF9pZD00ODcmY2FyX21ha2U9Ym13JmNhcl90eXBlPWU0Nm 0mY2F0X2lkPTE5JmNvbXBfaWQ9OA==.html (http://www.ca-automotive.co.uk/single_prod-cHJvZF9pZD00ODcmY2FyX21ha2U9Ym13JmNhcl90eXBlPWU0Nm 0mY2F0X2lkPTE5JmNvbXBfaWQ9OA==.html)
or give Roy/Phil a call.

Don’t use wheel bolts that are too long as on the rear they can pass into the parking brake drum and cause mayhem and the front they can interfere with sensors.

I hope that helps and good luck. :smt023

Thanks for your help much appreciated. Shimmy had pointed me to CA. I phoned them today and ordered the correct size of bolts.
:beer: