PDA

View Full Version : Max camber with all original parts?


magnust
01-03-2011, 03:55 PM
I've searched but haven't found info on what max camber can be set in the front and in the back with all original parts. Anyone know?

On my M3 E36 3.2 i swapped the left and right top mounts in the front which gave me a well working -3.2 camber which I drove with for many years. I noticed the CSL top mounts are offset in a similar fashion so swapping them would - if it's possible to swap them on a E46 - give added negative camber, but I have no idea what the adjustment range would be. I've tried to google for this info but came up empty. Anyone know?


TIA!

Thorney
01-03-2011, 04:46 PM
Depends on the chassis but not much more than 1.8 on the front, less is more likely

_Nathan_
01-03-2011, 04:53 PM
http://www.madrussian.net/m3/diy_camber.shtml

Link on there no longer working but indicates you can swap them over as per e36

alexk
01-03-2011, 06:32 PM
Friend from Greece has tried this in his CSL and it was working.

magnust
01-03-2011, 06:44 PM
Thanks for the info! I'll give the swap a go and keep my fingers crossed for decent camber values!



http://www.madrussian.net/m3/diy_camber.shtml

Link on there no longer working but indicates you can swap them over as per e36Yeah, too bad that page is missing. I'll give google another shot.

magnust
01-03-2011, 06:50 PM
:hahaha:


I googled and found the best info at..... my own web site :hahaha: :hahaha: :hahaha:

http://rejsa.nu/forum/viewtopic.php?t=32254

magnust
01-03-2011, 07:42 PM
Tada!

http://web.archive.org/web/20070115064230/http://e46m3performance.com/installs/strut-top/index.htm