Videos how to

[Mark CSL]

Hi all if you need a video how to do any job with in reason :whistle:

Just let me know and i shall do 1 :thumbs:

You cant beat a video showing you how :-D

[rs32]

how do you remove the door card assembly ?

creaks and rattles need sorting...........

[rs32]

and parcel shelf :thumbs:

[Mark CSL]

will do my best over the weekend :thumbs:

[Mark CSL]

and parcel shelf :thumbs:
Are you sure it is not just the back seat

[Andyk]

How do you take out rhe plastic bit between the rear seats . Mine has a crack in it so was looking to repair or maybe get cover in alcanatara.

[csljoe]

How do you remove the steering wheel cover?

Joe

[Mark CSL]

How do you remove the steering wheel cover?

Joe

Here you go :thumbs:
[/URL][url]http://s260.photobucket.com/albums/ii14/markcsl/?action=view&current=UVS080331-002_xvid.mp4 (http://www.cslregister.com/forum/viewtopic.php?t=482)
You need to remove the air bag
then there are 2 torque screws and there is also 2 behind the wheel at the bottom :thumbs:

[csljoe]

Hi Mark

Thats super, i'll give it a go. :notworthy:


Cheers Joe

[imurd]

Mark how do you get rid of a 54 plate csl?????

[Andyk]

Mark how do you get rid of a 54 plate csl?????

Hit a tree...park it in Central Birmingham :whistle: ....Leave it unlocked on your drive ways......I'm sure there is loads more ways :wink:

[Mark CSL]

Mark how do you get rid of a 54 plate csl?????

Bring it over to me and i shall keep it ian :thumbs:

[glendog74]

Kidney grill replacement? :-D

[Mark CSL]

How do you take out rhe plastic bit between the rear seats . Mine has a crack in it so was looking to repair or maybe get cover in alcanatara.

You just pull the front of the rear seat at both sides then remove from the car . The center part is held on with 2 plastic clips front and a metal ring on the rear.

I shall post pix of the seat out today :thumbs:

[Andyk]

Cheers Mark will have a go this week and see which is the best route for repair. Was told that it could be repair but would always be weak and a little presure will crack it again so may get it trimmed in alcantara.

[Mark CSL]

Here are the pix of the seat out and the center pice clips :thumbs:

The red parts show the parts where you pull the seat up
http://i260.photobucket.com/albums/ii14/markcsl/DSC04405-1.jpg

This is the under part of the middle
http://i260.photobucket.com/albums/ii14/markcsl/DSC04400.jpg
http://i260.photobucket.com/albums/ii14/markcsl/DSC04401.jpg

This is the rear of the middle part held on with a metal clip
http://i260.photobucket.com/albums/ii14/markcsl/DSC04403.jpg

[Andyk]

Cheers Mark

[_Nathan_]

Can you do a vid of entire interior removal ;)

Or a simple guide to front seats and door cards would be really handy.

Cheers

[Mark CSL]

The front seats are easy just 4 bolts then the airbag sensor wires
make sure you dont have the keys in the ignition or the airbag light will come on

The door cards have the 2 bolts on the handel then the door card just pulls off some force is required as it is held on with clips :thumbs:

[_Nathan_]

Work the seat one out - airbag light is on as I've been driving around with just the one seat, airbags are coming out in a few weeks so not worried.

Cheers for the door card tip - will try not to break them!

[NZ_M3]

The door cards have the 2 bolts on the handel then the door card just pulls off some force is required as it is held on with clips :thumbs:

one more by the door opening handle (the chrome one) and remember to unhook the locking mechanism on the back side of the handle.

[Sethlj]

Here you go :thumbs:
http://www.cslregister.com/forum/viewtopic.php?t=482
You need to remove the air bag
then there are 2 torque screws and there is also 2 behind the wheel at the bottom :thumbs:

Mark - bad link. Can you repost?

Cheers,

S.

[sailorbaz]

Just been searching for that one...

http://www.cslregister.com/forum/showthread.php?t=372&highlight=steering+wheel

This any better?

[s.mac]

I've got a very annoying rattle from my parcel shelf :banghead: can I remove it to see if any clips are missing/loose ??

[DuncanR]

Its probably a long shot Mark ... but, do you reckon you could do a video of how an overweight 53 year old, gets to pull a young 28 year old blonde with 36DD's , great body and about £5M in the bank .... it dont have to be full colour if that helps mate !??;)

[NZ_M3]

Its probably a long shot Mark ... but, do you reckon you could do a video of how an overweight 53 year old, gets to pull a young 28 year old blonde with 36DD's , great body and about £5M in the bank .... it dont have to be full colour if that helps mate !??;)

+1 here!! But I'd prefer it in HD full colour thanks :thumbs:

[NZ_M3]

I've got a very annoying rattle from my parcel shelf :banghead: can I remove it to see if any clips are missing/loose ??

Open the boot and stuff a tennis ball (or high density foam) in between the sheet metal and the parcel shelf - that parcel shelf's a pain in the butt to remove and you'll break clips quite easily.

[s.mac]

Open the boot and stuff a tennis ball (or high density foam) in between the sheet metal and the parcel shelf - that parcel shelf's a pain in the butt to remove and you'll break clips quite easily.

will give it a go :thumbs:

[Mark CSL]

Its probably a long shot Mark ... but, do you reckon you could do a video of how an overweight 53 year old, gets to pull a young 28 year old blonde with 36DD's , great body and about £5M in the bank .... it dont have to be full colour if that helps mate !??;)

+1 here!! But I'd prefer it in HD full colour thanks :thumbs:

I have never had the need for the video i married what you 2 are looking for :hahaha::hahaha::hahaha:

[DuncanR]

The front seats are easy just 4 bolts then the airbag sensor wires
make sure you dont have the keys in the ignition or the airbag light will come on

The door cards have the 2 bolts on the handel then the door card just pulls off some force is required as it is held on with clips :thumbs:

Mine has done that !! anyway of clearing it Mark?

[Mark CSL]

Here is the video again

http://s260.photobucket.com/albums/ii14/markcsl/?action=view&current=UVS080331-002_xvid.mp4

Enjoy

[CraigMillwardCroft]

Good video you did well to get those hands to remove the small plugs :whistle: