Brand new set of Bilstein PSS10 [Archive]

TANKSLAPPER

22-10-2010, 02:16 PM

3127

3128

These are a full set of Bilstein PSS10 brand new still in the box never fitted, bought this year.

Will fit any e46 M3 or CSL

Cost over £1,400 your's for £1,000

They are really easy to adjust without the need of allen keys or a car jack, just turn the large wheeled knob on the end,and job done.

DuncanR

22-10-2010, 02:25 PM

mattCSLnut

22-10-2010, 06:31 PM

pm sent mate :thumbs:

s.mac

23-10-2010, 12:05 PM

dont forget to get some adjustable top mounts Matt ;)
they really do make a difference on tyre wear!

daniel

23-10-2010, 12:28 PM

pm sent mate :thumbs:

Slippery slope Matt...

mattCSLnut

23-10-2010, 12:29 PM

dont forget to get some adjustable top mounts Matt ;)
they really do make a difference on tyre wear!

THANX Stave... collecting the Billiys tomorrow :thumbs:
I've been surfing on Turner Motor-sport web site, looking into adjustable top mounts :thumbs: plus strengthened rear shock top mounts, as well :whistle:
Do you know who else makes the adjustable front mounts ? I'm only really after cumber adjustment, not necessarily caster as well.
Any additional info + web linx would be most appreciated.

Thank you pleeeeeez :beer:

mattCSLnut

23-10-2010, 12:32 PM

Slippery slope Matt...
:hahaha: :hahaha: :hahaha: I'll be investing in extra grippy gloves then :blalalala: ;)

TANKSLAPPER

24-10-2010, 02:23 PM

SOLD IN FOUR HOURS :thumbs:

Bealo

24-10-2010, 03:56 PM

Good on you Matt :thumbs:

Let us know what you think of them.

mattCSLnut

24-10-2010, 03:57 PM

SOLD IN FOUR HOURS :thumbs:
Paid for & collected within 48 hours :thumbs:

mattCSLnut

24-10-2010, 04:06 PM

Good on you Matt :thumbs:

Let us know what you think of them.

Will do Stu :thumbs: but it won't be for a little while as this is one of a few CSL Winter project solutions up my sleeve :whistle: while she's already tucked in her little nest ;) :hahaha:
On first impression, the build quality of this kit is phenomenal :supz: and the size of the piston over stock CSL shocks is :119: :smokin:

karbonkid

24-10-2010, 04:11 PM

Sweet! Now give those arches a good seeing to before the kit goes on. :thumbs:

mattCSLnut

24-10-2010, 04:15 PM

Sweet! Now give those arches a good seeing to before the kit goes on. :thumbs:
Roger that... will get the "Super Duper" AS G101 solvent on, to get rid of the grime :thumbs:
She'll be like NEW after I've given her some :smt055 :whistle:

shimmy

24-10-2010, 04:33 PM

karbonkid

24-10-2010, 04:42 PM

I doubt Matt will have to go this route as the PSS10s are separate spring & damper as shown in OP pic, although always good to have a little added strength between the top mounts.

mattCSLnut

24-10-2010, 04:59 PM

Matt

Turner Camber Plates, Simpsons will sell you them. Tough bits of kit.

Are the Bildteins full coilovers at the rear? Choices are tp weld in plate(but then your BMW goodwill repair if your subframe goes will be hard to get) or what I did was fit BMW Z3 top strengthening plates and/or fit a solid rear Strutt between top mounts.

PM me if you want part number for Z3 plate.

Hi Shimmy... no the PSS10 kit is NOT a full coilovers so the rear is the same set up to O.E. (separate spring & shock) albeit of better quality and fully adjustable :thumbs: It's one of the reasons why I went for this kit, however I'm still thinking of changing the rear shock top mounts as I'm sure the ones in there at the moment will be well past their best by now :bigcry:
Here's what I've found so far: http://www.ca-automotive.co.uk/single_prod-cHJvZF9pZD0yMDA=.html plus http://www.ca-automotive.co.uk/single_prod-cHJvZF9pZD0yMjQ5.html

BTW NICE :drool: rear strut brace :thumbs: Who by ? how much ? and where from ? THANK U pleeeeez

DuncanR

24-10-2010, 09:08 PM

SOLD IN FOUR HOURS :thumbs:

fOOK IT T$ ... FORGET ABOUT MY LITTLE PROJECT !!!:banghead: :hahaha:

gOOD LUCK WITH THEM mATT.....

DuncanR

24-10-2010, 09:10 PM

Roger that... will get the "Super Duper" AS G101 solvent on, to get rid of the grime :thumbs:
She'll be like NEW after I've given her some :smt055 :whistle:

aND NOT FORGETTING YOUR "sHOCK SOCKS" MATEY !!! FECK CAAPS

mattCSLnut

24-10-2010, 10:09 PM

gOOD LUCK WITH THEM mATT.....

cHEERs dUNCS :thumbs:

mattCSLnut

24-10-2010, 10:15 PM

aND NOT FORGETTING YOUR "sHOCK SOCKS" MATEY !!! FECK CAAPS

aLL pARt oF THis grEAt KiT mATE :thumbs:

TANKSLAPPER

25-10-2010, 10:02 AM

Duncan what's your little project matey ?

;)

mattCSLnut

25-10-2010, 10:27 AM

Duncan what's your little project matey ?

;)

Could it possibly be this ? :whistle:

glendog74

25-10-2010, 10:32 AM

Can't be - it doesn't have his name stuck to it's sides :banghead:

mattCSLnut

25-10-2010, 11:04 AM

Can't be - it doesn't have his name stuck to it's sides :banghead:
I think Duncan's got his priorities right. Suspension first :thumbs: then some Pimpin' :whistle:

glendog74

25-10-2010, 11:20 AM

Sorted! :hahaha: :hahaha: :hahaha:

Rutkowski

25-10-2010, 08:50 PM

Hi Shimmy... no the PSS10 kit is NOT a full coilovers so the rear is the same set up to O.E. (separate spring & shock) albeit of better quality and fully adjustable :thumbs: It's one of the reasons why I went for this kit, however I'm still thinking of changing the rear shock top mounts as I'm sure the ones in there at the moment will be well past their best by now :bigcry:
Here's what I've found so far: http://www.ca-automotive.co.uk/single_prod-cHJvZF9pZD0yMDA=.html plus http://www.ca-automotive.co.uk/single_prod-cHJvZF9pZD0yMjQ5.html

BTW NICE :drool: rear strut brace :thumbs: Who by ? how much ? and where from ? THANK U pleeeeez

Matt - i've had Bilsteins for the past 4 years. PSS9 and earlier this year - replaced with PSS10 set up. As i said many times - it's a beautiful kit that delievers. Quality and performance is beyond BMW OEM stuff. :thumbs:

mattCSLnut

25-10-2010, 08:56 PM

Matt - i've had Bilsteins for the past 4 years. PSS9 and earlier this year - replaced with PSS10 set up. As i said many times - it's a beautiful kit that delievers. Quality and performance is beyond BMW OEM stuff. :thumbs:

I agree :thumbs: It certainly looks the "Bees-Knees" :supz: lying here on the floor in my office :thumbs:
One of a few CSL winter project for the quiet months ahead :whistle:
BTW what top mounts (front & rear) did you go for, on your set up ?

alexk

25-10-2010, 08:59 PM

I agree :thumbs: It certainly looks the "Bees-Knees" :supz: lying here on the floor in my office :thumbs:
One of a few CSL winter project for the quiet months ahead :whistle:

Oh, well done mate !
:thumbs:
Where are the pics ?

So I guess you won't be helping with the öhlins solutions next year ?

mattCSLnut

25-10-2010, 09:10 PM

Oh, well done mate !
:thumbs:
Where are the pics ?

At the very start of this thread :thumbs:

So I guess you won't be helping with the öhlins solutions next year ?

No, no I'm still IN :thumbs: I keep my promises ... what bolts on can be unbolted, right ? ;) :hahaha:

shimmy

26-10-2010, 12:49 PM

there are some more PSS10 for sale here!

http://www.pistonheads.com/sales/2132139.htm

DuncanR

26-10-2010, 12:52 PM

there are some more PSS10 for sale here!

http://www.pistonheads.com/sales/2132139.htm

Thats just Matt making a £100 over what he paid T$ for them !!! :hahaha:

mattCSLnut

26-10-2010, 01:07 PM

there are some more PSS10 for sale here!

http://www.pistonheads.com/sales/2132139.htm
Yes I've had my eye on them but they are £100 more then what I've paid and have supposedly done 500 miles (hopefully not 500 Track miles) :whistle:
... where as mine are Brand NEW and bought from a reliable sours :thumbs:

mattCSLnut

26-10-2010, 01:10 PM

Thats just Matt making a £100 over what he paid T$ for them !!! :hahaha:
:butthead: :blalalala: ;) :hahaha:

DuncanR

26-10-2010, 01:16 PM

Duncan what's your little project matey ?

;)

Will email you mate.... early days !

TANKSLAPPER

26-10-2010, 01:25 PM

Yes I've had my eye on them but they are £100 more then what I've paid and have supposedly done 500 miles (hopefully not 500 Track miles) :whistle:
... where as mine are Brand NEW and bought from a reliable sours :thumbs:

I'm not too reliable........................:hahaha::hahaha::h ahaha:

T$

.

Dan

26-10-2010, 01:34 PM

there are some more PSS10 for sale here!

http://www.pistonheads.com/sales/2132139.htm

They do certainly look absolutely mint too! :smokin:

mattCSLnut

26-10-2010, 01:54 PM

I'm not too reliable........................ :hahaha::hahaha::hahaha:

T$

Ohhh crap :smt100 ;) :hahaha:

Silver Bullet

26-10-2010, 08:25 PM

I'm not too reliable........................:hahaha::hahaha::h ahaha:

T$

.

He's not Matt

He's running a north kent suspension racket and rumour has it the shocks are filled with old engine oil!:blalalala:

mattCSLnut

26-10-2010, 08:40 PM

He's not Matt

He's running a north kent suspension racket and rumour has it the shocks are filled with old engine oil!:blalalala:

Great! :thumbs: Can't wait to find out the numerous benefits of old engine oil in NEW Billysteins :smt100 The clue was in the name :clown: right ?
I guess you get what you pay for ;) :hahaha:

Silver Bullet

26-10-2010, 08:54 PM

Great! :thumbs: Can't wait to find out the numerous benefits of old engine oil in NEW Billysteins :smt100 The clue was in the name :clown: right ?
I guess you get what you pay for ;) :hahaha:

LOL:hahaha:...........You will love 'em mate:thumbs:;)

mattCSLnut

26-10-2010, 09:21 PM

LOL:hahaha:...........You will love 'em mate:thumbs:;)
Looking forward to testing them @ the Green Hell next year :thumbs:

glendog74

26-10-2010, 09:39 PM

This must be the longest 'for sale' thread ever :hahaha:

karbonkid

26-10-2010, 09:41 PM

This must be the longest 'for sale' thread ever :hahaha:

:hahaha:
I thought the exact same earlier. :thumbs:

mattCSLnut

26-10-2010, 09:41 PM

This must be the longest 'for sale' thread ever :hahaha:
Indeed :hahaha: but also the fastest SALE :thumbs:

shane@mbtech

26-10-2010, 09:42 PM

Matt just loves the attention, he is a little whore;)

mattCSLnut

26-10-2010, 09:43 PM

:hahaha:
I thought the exact same earlier. :thumbs:
It's only going to get longer with this sort of chit-chatter ;) :hahaha:

mattCSLnut

26-10-2010, 09:46 PM

Matt just loves the attention, he is a little whore;)
I bathe in it Lawsy ;) :hahaha: Yeah !!!
I resent the suggestion of 'little' whore ? :gayfight:

Silver Bullet

26-10-2010, 09:54 PM

Such a nice set though!

When you fitting them matt?:hahaha:

alexk

26-10-2010, 10:40 PM

BTW I had the same in my Abarth SS.
Very good suspension !

Rutkowski

26-10-2010, 10:54 PM

I agree :thumbs: It certainly looks the "Bees-Knees" :supz: lying here on the floor in my office :thumbs:
One of a few CSL winter project for the quiet months ahead :whistle:
BTW what top mounts (front & rear) did you go for, on your set up ?

I've got turner motorsport camber / caster and rouge engineering on the rears matey! :thumbs:

:beer: