CSLReg Display Plates

[karbonkid]

Right Chaps...I had been toying with the idea of creating a display plate for Track/ Static display use for some time and thanks to Steve aka 'Phat///M3' who has been helping me with all the require artwork, we have managed to come up with a final image that has now been forwarded to the printers.

I now need to know an idea on possible numbers who may be interested in a set, to generate a better idea on what cost will be per set. Please add your name below or PM if preferred, to show your interest. :thumbs:

Below is a mock up of the plate:

http://img412.imageshack.us/img412/3286/picture5yx.png (http://img412.imageshack.us/i/picture5yx.png/)

Any questions - drop em below/ PM me.

[DuncanR]

Looks good the pair of you, and there is just enough space at the ends to put some initials so that Im fully aware of who im about to pass ! All those SG motors at Spa confused me somewhat as didnt know who was who !

Put me down for a set KK, as I shall be converting my new plate to a velcro type TD rip off one !:smokin:

[karbonkid]

Heres a quick illustration to what they should look like (to give you more idea), sorry Dunc for no SB examples. :bigcry:

http://img194.imageshack.us/img194/3624/plateoncslfront.jpg (http://img194.imageshack.us/i/plateoncslfront.jpg/)http://img576.imageshack.us/img576/4571/plateoncslrear.jpg (http://img576.imageshack.us/i/plateoncslrear.jpg/)



Add your name below if interested:

1. KarbonK
2. DuncanR
3.

[SachaR]

Add your name below if interested:

1. KarbonK
2. DuncanR
3.SachaR
4.

[DuncanR]

sorry Dunc for no SB examples. :bigcry:


1. DuncanR
2. KarbonK
3.

nO WORRIES kk ALL SORTED, i HAVE ALSO AMENDED THE LIST IN ORDER OF PRIORITY !! ...AH BOLLOCKS AGAIN

[phat///M3]

Hope everyone likes it, I do want to praise/give credit to Adam (aka CSLCup) as he was kind enough to send me a file with the CSL lettering they use on the CSL Cup and it also had the red register letters in there which I decided to use in the end aswell.

[scrubberamit]

1. KarbonK
2. DuncanR
3.SachaR
4.ScrubberAmit

[flatout]

1.[/B] KarbonK
2. DuncanR
3.SachaR
4.ScrubberAmit
5. Flatout

[DuncanR]

1. DuncanR
2. KarbonKid
3.SachaR
4.ScrubberAmit
5. Flatout

[mattCSLnut]

Looks good Alex and I'm in but can the whole logo be enlarged a touch more to fill the space, as there's too much emptiness around it at the moment :whistle:

1. DuncanR
2. KarbonKid
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut

[Roland]

looking good!

1. DuncanR
2. KarbonKid
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland

[karbonkid]

Ahh.. numbers Rising!

@matt - we did try enlarging the image and has being enlarged slightly from the original now. We initially thought the image may be better kept smaller (like shown) as it appears a little more subtle and classy. But this is open to all suggestions and wiling to try before you buy. So will ask Steve to enlarge a little (if he hasn't had enough of me already) and I will post up another illustration. ;)

[mattCSLnut]

Ahh.. numbers Rising!

@matt - we did try enlarging the image and has being enlarged slightly from the original now. We initially thought the image may be better kept smaller (like shown) as it appears a little more subtle and classy. But this is open to all suggestions and wiling to try before you buy. So will ask Steve to enlarge a little (if he hasn't had enough of me already) and I will post up another illustration. ;)
I appreciate that ;) For sure, I'm all for classy & subtle but the overall smallness of the logo was the first thing that caught my extra sensitive eye:gayfight:
I look forward to the revised illustration :thumbs:

[karbonkid]

The List

1. DuncanR
2. KarbonKid
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8.
9.
10.

I have had a price back from the printers based on 10 or more being purchased, it will be as follows:

£18.50 /pair, inc UK delivery.

[Yanto]

nice idea, KK - go on then...

1. DuncanR
2. KarbonKid
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8. Yanto
9.
10.

[karbonkid]

Right Matt I have just enlarged slightly, whats your thoughts. It now carriers a border which will be on the final edition.

Normal
http://img811.imageshack.us/img811/3624/plateoncslfront.jpg (http://img811.imageshack.us/i/plateoncslfront.jpg/)

Enlarged
http://img19.imageshack.us/img19/2109/cslplatefrontbigger.jpg (http://img19.imageshack.us/i/cslplatefrontbigger.jpg/)

[mattCSLnut]

Right Matt I have just enlarged slightly, whats your thoughts. It now carriers a border which will be on the final edition.

Normal
http://img194.imageshack.us/img194/3624/plateoncslfront.jpg (http://img194.imageshack.us/i/plateoncslfront.jpg/)

Enlarged
http://img19.imageshack.us/img19/2109/cslplatefrontbigger.jpg (http://img19.imageshack.us/i/cslplatefrontbigger.jpg/)

Much better Alex :thumbs: Lets see what everyone else thinks before going to print :whistle:

[Dan]

The larger logo is spot on IMO but drop the border for me personally, other than that I'm in for sure! :thumbs:

1. DuncanR
2. KarbonKid
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8. Yanto
9. Dan
10.

Great work Alex and Steve :beer: :thumbs:

[sailorbaz]

1. DuncanR
2. KarbonKid
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8. Yanto
9. Dan
10. Sailorbaz

Looks great guys, good work. Look forward to receiving the finished article, :beer:

[DuncanR]

The List

1. DuncanR
2. KarbonKid
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8.
9.
10.

I have had a price back from the printers based on 10 or more being purchased, it will be as follows:

£18.50 /pair, inc UK delivery.

wILL HE PUT MY NEW REG ON THE BACK AS WELL FOR THAT MUCH kk ...shite !

[7.77]

1. DuncanR
2. KarbonKid
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8. Yanto
9. Dan
10. Sailorbaz
11. 7.77

[phat///M3]

Now with new High Quality flag.

Is this big enough???

[mattCSLnut]

Now with new High Quality flag.

Is this big enough???
:supz: :supz: :supz:

[phat///M3]

:supz: :supz: :supz:

I'll take that as a yes then :gayfight:

[karbonkid]

Now with new High Quality flag. (Size 2)

Is this big enough???

Just to give you all a better perspective, I have sized it down equally in proportion.

Once we have decided on size from below and whether it is to have a border, we are all set to get them on the cook!


Original Size 1
http://img819.imageshack.us/img819/3624/plateoncslfront.jpg (http://img819.imageshack.us/i/plateoncslfront.jpg/)

http://img816.imageshack.us/img816/4571/plateoncslrear.jpg (http://img816.imageshack.us/i/plateoncslrear.jpg/)


New Size 2
http://img694.imageshack.us/img694/624/bfinal.jpg (http://img694.imageshack.us/i/bfinal.jpg/)

http://img143.imageshack.us/img143/3141/cfinal.jpg (http://img143.imageshack.us/i/cfinal.jpg/)

[Dan]

Now with new High Quality flag.

Is this big enough???

Looks great, but still no border for me please! :smokin:

[SachaR]

Same for me, no borders as I will have to cut down plates to fit

[shimmy]

My 2p

would it not be better without the top Register and just CSL and flag, surely the web address is sufficient as two registers on one plate looks a bit overkill :smokin:

[DuncanR]

My 2p

would it not be better without the top Register and just CSL and flag, surely the web address is sufficient as two registers on one plate looks a bit overkill :smokin:

Good point ... like your thinking !

[phat///M3]

My 2p

would it not be better without the top Register and just CSL and flag, surely the web address is sufficient as two registers on one plate looks a bit overkill :smokin:

I'll do one like that later on today but I prefer it with the red register.

[alexk]

1. DuncanR
2. KarbonKid
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8. Yanto
9. Dan
10. Sailorbaz
11. 7.77
12. alexk


Any chance that i get a small one for the front ?
Swiss cars have the privilege to have tiny front plates :thumbs:

[DuncanR]

Any chance that i get a small one for the front ?
Swiss cars have the privilege to have tiny front plates :thumbs:

Looks shit though Alex !! :thumbs:

[phat///M3]

My 2p

would it not be better without the top Register and just CSL and flag, surely the web address is sufficient as two registers on one plate looks a bit overkill :smokin:

Good point ... like your thinking !


Just a very quick one. I prefer it with the faded flag and red letters makes it look more like a real logo.

[phat///M3]

12. alexk


Any chance that i get a small one for the front ?
Swiss cars have the privilege to have tiny front plates :thumbs:

I decided to take that privilege :thumbs:

Out of curiosity what size is your front plate?

http://darkline.org.uk/steve/sunday2803/DSC06118b.jpg

[karbonkid]

12. alexk


Any chance that i get a small one for the front ?
Swiss cars have the privilege to have tiny front plates :thumbs:

send us the front plate size and I will ask. ;)

[alexk]

I will measure later and let you know...

Plate solutions !!!

[3wheels3]

Like that with the website in the red. Looks v good.

http://www.cslregister.com/forum/attachment.php?attachmentid=2556&stc=1&d=1278671808

[shimmy]

Like that with the website in the red. Looks v good.

http://www.cslregister.com/forum/attachment.php?attachmentid=2556&stc=1&d=1278671808

Maybe website in red and bigger flag

can we get sunstrip solutions?

[3wheels3]

can we get sunstrop solutions?

You're a smart cookie, great idea!

[phat///M3]

Maybe website in red and bigger flag

can we get sunstrop solutions?

Should be do able, but I personally still prefer the other one, will wait to see what the general consensus is, just think it looks more complete with the register in red.

[SachaR]

I Like the new plate but would it not be worth adding the //M3 at the front? (the colours and font like that of PHAT M3 signature?)

[karbonkid]

Looks like you chaps have been busy here!

I personally think it looks great as it is, but happy to hear others out.

On another note: I spoke to the supplier today and was told the plate can be scaled down to make a smaller plate for those, however the white border cannot be removed with the black plates.

[shimmy]

Looks like you chaps have been busy here!

I personally think it looks great as it is, but happy to hear others out.

On another note: I spoke to the supplier today and was told the plate can be scaled down to make a smaller plate for those, however the white border cannot be removed with the black plates.


Why not

evolve had a black plate with no border and you could always do the cheaper way and buy blank black plates and by vinyl stickers like Natgan sent me for the Racedatasystems logo

[alexk]

I will measure later and let you know...

Plate solutions !!!

My front plate is 30 x 8 cm
:supz:

[alexk]

I personally don't like the red register.

[phat///M3]

Silver then?

[karbonkid]

I give up.. :banghead:

[shimmy]

I give up.. :banghead:


never give up ;)

and dont forget forum rule number 4

"if thou ask questions on a forum thou shall get many answers most of which are pants"

[phat///M3]

I give up.. :banghead:

Haha, didnt you send the design of to print alread? If yes then that solves the debate.

[DuncanR]

My front plate is 30 x 8 cm
:supz:


Mmmmm ..small .... like quite a few things in Swiss apparently !!:whistle:

[karbonkid]

Haha, didnt you send the design of to print alread? If yes then that solves the debate.

Nah not yet Steve, I have forwarded the design to the printers every-time it has changed, but is currenty on hold till I give them the ok. Just waiting back an email from another supplier to see if its possible to have the plate supplied without a border as everyones request. I have been told by the printer I have been dealing with that this is not possible.

Will update all, when I receive a reply. :thumbs:

[karbonkid]

To keep you all updated:

The plates supplied to Evolve are foamex and may not be suitable.

I have however finally found a company that can do a black only plate with no border, which I think will be best.

Now thats cleared up, we need to decide what design we are going for here:

Option 1:

http://img822.imageshack.us/img822/1180/afinal.jpg (http://img822.imageshack.us/i/afinal.jpg/)


Option 2:

http://img121.imageshack.us/img121/5042/afinalblack.jpg (http://img121.imageshack.us/i/afinalblack.jpg/)

Or Option 2 with colour text?

[alexk]

I like the 2nd one without the red lettering.

[mattCSLnut]

Option 2 solutions
Thank U please :thumbs:

[Dan]

I can't make my mind up now! Lol I think I still prefer the red lettering personally.

[Bounce]

I think the red one looks good.;)

[phat///M3]

Here's the different ones, dont think there is much else to be tried colour wise.

I still like it better with the word register in it (just looks more complete), it might be in the URL again but then so is CSL ;)

[karbonkid]

I personally like the original as I think the flag only looks a little plain.

[phat///M3]

Please vote here ------> http://www.cslregister.com/forum/showthread.php?t=4852

[Dan]

Top one by a country mile!!!!

[neil]

top here too :thumbs: looks lovely :beer:

[karbonkid]

Chaps can I say you are all still down for option 1 (due to winning pole)?

This would be a solid black background, without a border. Just waiting for a 3rd sample to be made up to check quality and materials before going ahead with the bulk order.

If others wish to put their name down for a set or people below wish to be removed please edit:

1. KarbonKid
2. DuncanR
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8. Yanto
9. Dan
10. Sailorbaz
11. 7.77
12. Alexk

Option 1 (with red "Register"):

http://www.cslregister.com/forum/attachment.php?attachmentid=2586&stc=1&d=1279310050

[DuncanR]

you can !

[jeffers]

Not in a position to use it yet, but may as well get one in - happy with option 1 as luck would have it.

1. KarbonKid
2. DuncanR
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8. Yanto
9. Dan
10. Sailorbaz
11. 7.77
12. Alexk
13. jeffers

[steveH]

I shall be very keen as soon as I have CSL to put them on.
For my benifit How do you intend for these to be fixed over the actual reg. plates??

Right Chaps...I had been toying with the idea of creating a display plate for Track/ Static display use for some time and thanks to Steve aka 'Phat///M3' who has been helping me with all the require artwork, we have managed to come up with a final image that has now been forwarded to the printers.

I now need to know an idea on possible numbers who may be interested in a set, to generate a better idea on what cost will be per set. Please add your name below or PM if preferred, to show your interest. :thumbs:

Below is a mock up of the plate:

http://img412.imageshack.us/img412/3286/picture5yx.png (http://img412.imageshack.us/i/picture5yx.png/)

Any questions - drop em below/ PM me.

[s.mac]

big thanks to Steve (PhatM3) he's gone out of his way with loads of emails and file sending :thumbs:
fingers crossed mine will be on the car on Tuesday :drool: although not on a number plate ;)

all in time for Oulton week on Saturday :smokin:

Thanks again Steve :thumbs:

[karbonkid]

I received the 3rd & final sample, which I am now finally happy with regards quality of the plate, based on the improvements they have promised to make on the final pieces.

Total - £18.50 inc UK delivery for a pair of Standard sizes.
I will confirm tomorrow if smaller plate sizes can be produced for the fronts for you foreign chaps.

For all who are still interested please forward payment to me inc your delivery address.
Payment can be made to me via Paypal (Gift) or bank transfer. (PM me for bank transfer details or other alternative methods).
Paypal: aceparts@hotmail.com


Please add or remove your name, inc payment sent.

1. KarbonKid - Paid
2. DuncanR
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8. Yanto
9. Dan
10. Sailorbaz
11. 7.77
12. Alexk
13. jeffers

Once everyones payment has been received I will forward the payment in bulk and inc all delivery addresses.

[DuncanR]

Alex, just tried to pay from here in Poland via PayPal, it wont go thro, Im back next Monday if that will do ? Im good for it if you want to send order early:blalalala:

[sailorbaz]

1. KarbonKid - Paid
2. DuncanR
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8. Yanto
9. Dan
10. Sailorbaz - Paid
11. 7.77
12. Alexk
13. jeffers

[karbonkid]

Alex, just tried to pay from here in Poland via PayPal, it wont go thro, Im back next Monday if that will do ? Im good for it if you want to send order early:blalalala:

No worries, sort it when back. They will be waiting for you time you get back (if the others sort themselves out!)


1. KarbonKid - Paid
2. DuncanR - Reserved
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8. Yanto
9. Dan
10. Sailorbaz - Paid
11. 7.77
12. Alexk
13. jeffers

[Dan]

Alex, I've just tried to send the money using the Paypal App on my phone and it's not having it, will get it sorted when I get to work first thing tomoz mate :-)

[Bounce]

Alex, I've just tried to send the money using the Paypal App on my phone and it's not having it, will get it sorted when I get to work first thing tomoz mate :-)Make sure you get the money before you send it Alex.:whistle::whistle:

[sailorbaz]

Alex, I've just tried to send the money using the Paypal App on my phone and it's not having it, will get it sorted when I get to work first thing tomoz mate :-)

I was just reading about the Paypal app for the Blackberry while sending my payment to KK. While reading the reviews, I read that it was pish! So didn't bother downloading it! :hahaha:

[shimmy]

I was just reading about the Paypal app for the Blackberry while sending my payment to KK. While reading the reviews, I read that it was pish! So didn't bother downloading it! :hahaha:


iPhone one is A1 :thumbs:

[Dan]

Make sure you get the money before you send it Alex.:whistle::whistle:

Cheeky fucker! :birdman:

iPhone one is A1 :thumbs:

I'm on iPhone Shim, I can't have set it up right :banghead:

[Dan]

1. KarbonKid - Paid
2. DuncanR - Reserved
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8. Yanto
9. Dan - Paid
10. Sailorbaz - Paid
11. 7.77
12. Alexk
13. jeffers

[Yanto]

Thx guys .....:thumbs:

1. KarbonKid - Paid
2. DuncanR - Reserved
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8. Yanto- Paid
9. Dan - Paid
10. Sailorbaz - Paid
11. 7.77
12. Alexk
13. jeffers

[Roland]

1. KarbonKid - Paid
2. DuncanR - Reserved
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland - still waiting for price quote to germany!
8. Yanto- Paid
9. Dan - Paid
10. Sailorbaz - Paid
11. 7.77
12. Alexk
13. jeffers

:smokin:

[7.77]

please, what is the price including postage to france ?
thanks

[karbonkid]

7. Roland - still waiting for price quote to germany!

:smokin:

please, what is the price including postage to france ?
thanks

PM'd the pair of ya. ;)

[mattCSLnut]

PM'd the pair of ya. ;)
KK, is cash in Yer hand today @ Brands OK ?

[karbonkid]

KK, is cash in Yer hand today @ Brands OK ?

Preferably Paypal, as its being fired over to the company direct with everyone elses, along with separate delivery addresses. Any good? I know what will happen with that cash otherwise, beer solutions in pub after Brands!

[mattCSLnut]

Preferably Paypal, as its being fired over to the company direct with everyone elses, along with separate delivery addresses. Any good? I know what will happen with that cash otherwise, beer solutions in pub after Brands!
No worries ... £18.50 incoming via PayPal payment solutions :beer:
Thank you please :thumbs:

[karbonkid]

1. KarbonKid - Paid
2. DuncanR - Reserved
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut - Paid
7. Roland - Waiting confirmation
8. Yanto- Paid
9. Dan - Paid
10. Sailorbaz - Paid
11. 7.77 - Paid
12. Alexk
13. jeffers

[Roland]

1. KarbonKid - Paid
2. DuncanR - Reserved
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut - Paid
7. Roland - Paid
8. Yanto- Paid
9. Dan - Paid
10. Sailorbaz - Paid
11. 7.77 - Paid
12. Alexk
13. jeffers

:thumbs:

[edylcreyob]

Price posted to Melbourne, Australia please

[SachaR]

1. KarbonKid - Paid
2. DuncanR - Reserved
3. SachaR - Paid
4. ScrubberAmit
5. Flatout
6. mattCSLnut - Paid
7. Roland - Paid
8. Yanto- Paid
9. Dan - Paid
10. Sailorbaz - Paid
11. 7.77 - Paid
12. Alexk
13. jeffers

[edylcreyob]

1. KarbonKid - Paid
2. DuncanR - Reserved
3. SachaR - Paid
4. ScrubberAmit
5. Flatout
6. mattCSLnut - Paid
7. Roland - Paid
8. Yanto- Paid
9. Dan - Paid
10. Sailorbaz - Paid
11. 7.77 - Paid
12. Alexk
13. jeffers
14 edylcreyob Paid

[DuncanR]

Duncan, you have sent £18.50 GBP to Alex.
We have sent you a receipt for this transaction and an email has also been sent to your recipient:thumbs:

[karbonkid]

It's true what they say, you are certainly different and somewhat special. ;)
Just waiting for others to confirm in or out? Duncan, you have sent £18.50 GBP to Alex.
We have sent you a receipt for this transaction and an email has also been sent to your recipient:thumbs:

[DazBlackCSL]

It's true what they say, you are certainly different and somewhat special. ;)
Just waiting for others to confirm in or out?

Jeffers has just text me KK to say he is deffo, but on hols with no access to pay or post, but is 100% :thumbs:

Daz

[karbonkid]

Jeffers has just text me KK to say he is deffo, but on hols with no access to pay or post, but is 100% :thumbs:
Daz

Kool..Sorted. Thanks for the heads up. :thumbs:


1. DuncanR - Paid
2. KarbonK - Paid
3. SachaR - Paid
4. ScrubberAmit - Waiting OK
5. Flatout - Waiting OK
6. mattCSLnut - Paid
7. Roland - Paid
8. Yanto- Paid
9. Dan - Paid
10. Sailorbaz - Paid
11. 7.77 - Paid
12. jeffers - Reserved/ ordered
13. edylcreyob - Paid

Any more late entries?

[karbonkid]

Plates were all sent out last Friday (27th) 1st Class. Please notify me if you do not receive them. :thumbs:

1. DuncanR - Paid - Sent
2. KarbonK - Paid - Sent
3. SachaR - Paid - Sent
4. ScrubberAmit - Waiting OK
5. Flatout - Waiting OK
6. mattCSLnut - Paid - Waiting delivery
7. Roland - Paid - Sent
8. Yanto- Paid - Sent
9. Dan - Paid - Sent
10. Sailorbaz - Paid - Waiting delivery
11. 7.77 - Paid - Sent
12. jeffers - Reserved/ waiting payment
13. edylcreyob - Paid - Sent
14. Theodoros - Paid- Sent

[Yanto]

Got mine through - they look ace IMO

thx for organising Alex :thumbs:

[DuncanR]

Got mine through - they look ace IMO

thx for organising Alex :thumbs:


+ 1 ... where r the fookin screws ??? ;)

[Yanto]

+ 1 ... where r the fookin screws ??? ;)

I know you have one loose already mate :hahaha::hahaha:

[Bounce]

I know you have one loose already mate :hahaha::hahaha::hahaha::hahaha:

[phat///M3]

Pics on the car anyone?

[karbonkid]

Got mine through - they look ace IMO

thx for organising Alex :thumbs:

Ta. Think they've come out great too, sorry for the delay but im a fussy one! some 5 samples later...

+ 1 ... where r the fookin screws ??? ;)

Where ever the fook you left em!!


p.s only joking... they're at the bottom of the jiffy bag with the left handed screwdriver which I included with yours Dunc!

Pics on the car anyone?

Patients, you'll find out yourself (small token en route for putting up with me along the way) ;)

[karbonkid]

N.B - for those who have got/ yet to receive their plates I must mention these Instructions from the Printers:

When receiving, you will see a rainbow effect film on the surface of the plate when new, which is what has been left behind after being manufactured. Due to the nature of a black plate, it will show light scratches if cleaned with a contaminated/ abrasive cloth. (like a SB CSL) ;)

To prevent scratching the plate's surface, not needing any cleaning agents you must use a clean dry Microfibre cloth, gently rubbing over the surface until all film has been removed. This method is recommended to be used for further cleaning in the future. Easy...

Pics on the car anyone?

Hes one to keep ya going!

http://img39.imageshack.us/img39/607/1snv35606crop.jpg (http://img39.imageshack.us/i/1snv35606crop.jpg/)

[sailorbaz]

Looks smart KK, good work.

It pains me to say this but it will look smart and fook on a SB car!

[edylcreyob]

I was trying to peel off the protective coating till I read your post...I hear you all from here, dumb f...ing aussie:birdman:

Obviously mine arrived safely and promptly...thanks

[phat///M3]

Patients, you'll find out yourself (small token en route for putting up with me along the way) ;)

N.Hes one to keep ya going!

http://img39.imageshack.us/img39/607/1snv35606crop.jpg (http://img39.imageshack.us/i/1snv35606crop.jpg/)

Looking good Alex, cant wait to see them in the post now :thumbs: Thanks a million.

[Mark CSL]

Those Look Good :thumbs: I might have a set for my evo :hahaha::hahaha::hahaha:

[Roland]

got mine today.

thanks a lot Alex :thumbs:

[SachaR]

Just got back from a trip and they were there :smt055

Thanks Alex!

[Dan]

Just got back from holiday and the logo looks great, would have been nice if it was in the centre of the plate though!? :whistle:

[phat///M3]

Just got back from holiday and the logo looks great, would have been nice if it was in the centre of the plate though!? :whistle:

Its centered in my file, have not seen them yet are you kidding Dan?

[Dan]

Its centered in my file, have not seen them yet are you kidding Dan?

No not kidding mate lol Spoke to Alex on it and it's fine, I can take a pic later and post it up if you want to see?

[phat///M3]

No not kidding mate lol Spoke to Alex on it and it's fine, I can take a pic later and post it up if you want to see?

Are they all like that then?

[Dan]

Are they all like that then?

I can't speak for others obviously so what do others say on the matter? :)

[phat///M3]

I can't speak for others obviously so what do others say on the matter? :)

Pic solutions :thumbs:

[phat///M3]

Pic solutions :thumbs:

Never thought I would use the whole solutions thing :banghead:

[Dan]

Never thought I would use the whole solutions thing :banghead:

:hahaha: :gayfight: In don't! ;)

[DuncanR]

I just removed my number plate holder, redrilled and moved it all along about 40mm !! sorted ! :supz:

[phat///M3]

I just removed my number plate holder, redrilled and moved it all along about 40mm !! sorted ! :supz:

Poor bumper knew it would be better off with me :banghead:

[phat///M3]

Recieved mine today, thanks a million Alex :thumbs:

I can't speak for others obviously so what do others say on the matter? :)

Mine are the same, has to be down to the printers as the flag is different (not faded) and on the file used to make it, the letters are centered.

[karbonkid]

1. DuncanR - Paid - Sent
2. KarbonK - Paid - Sent
3. SachaR - Paid - Sent
4. ScrubberAmit - Paid - Sent
5. Flatout - Waiting OK
6. mattCSLnut - Paid - Sent
7. Roland - Paid - Sent
8. Yanto- Paid - Sent
9. Dan - Paid - Sent
10. Sailorbaz - Paid - Sent
11. 7.77 - Paid - Sent
12. edylcreyob - Paid - Sent
13. Theodoros - Paid- Sent
14. Phat///M3 - Sent
15. kookiemonster5 - Paid - Sent
16. Jeffers - Paid - Sent

[7.77]

I can't speak for others obviously so what do others say on the matter? :)


mine also

[7.77]

http://i25.servimg.com/u/f25/11/05/96/93/img_2610.jpg (http://www.servimg.com/image_preview.php?i=778&u=11059693)

http://i25.servimg.com/u/f25/11/05/96/93/img_2611.jpg (http://www.servimg.com/image_preview.php?i=779&u=11059693)

but no prob and thanks

[karbonkid]

Mine are the same, has to be down to the printers as the flag is different (not faded) and on the file used to make it, the letters are centered.

I have just had a chat with the printers and they told me all their settings for it to be centered when going to print were correct and are not sure why they would appear slightly off centre. TBH I didn't notice as its marginal, otherwise I would have queried it at the time.

For what they are initially going to be used for on track I think you will even find it hard to read the plate from a distance, let alone get a chance to get the tape measure out on it. Well.... not strictly true when knowing how slow some of you drive. ;)

Joking aside, if this is an issue PM me and I will get another set made up for you.

I have been informed from the printers that all plates that are ordered from today onwards will be revised, but will have to be manually adjusted as the plate is centered on their systems.

[7.77]

http://i25.servimg.com/u/f25/11/05/96/93/img_2612.jpg (http://www.servimg.com/image_preview.php?i=780&u=11059693)

[shimmy]

i think youll find the have put the gap between CSL and Register in the middle!:thumbs:

[karbonkid]

Further to our discussion of the CSLReg Display Plates being off centre, the Printers have agreed to recall all the plates and replace with the new revised version 'FOC'!

For all who wish to have theirs changed please return back to me and you will be replaced with the new set. I will PM everyone with the return address & make sure you have all seen this.

[karbonkid]

Had a few ask best ways to secure the plate. I have no drill holes, mine are taped. When drilled they often let water in & look messy too IMO.

I use this stuff (http://cgi.ebay.co.uk/5m-DOUBLE-SIDED-FOAM-ROLL-1-/330470630294?pt=UK_Crafts_Other_Crafts_EH&hash=item4cf195a396#ht_756wt_913), works perfect, tested to 170mph, leaves no mess when taking off, Lightweight!... and costs under half the price of a Pint! :thumbs:

[sailorbaz]

Good shout.

and costs under half the price of a Pint! :thumbs:

So, just less than half a pint then... for those Half Pint drinking fags! :hahaha:

[sailorbaz]

Morning KK,

I'm home on Thursday now, so if you get a chance today or tomorrow to mail me my 'newly revised plates' that would be great.
Thanks again for all your effort,
Baz

[karbonkid]

Morning KK,

I'm home on Thursday now, so if you get a chance today or tomorrow to mail me my 'newly revised plates' that would be great.
Thanks again for all your effort,
Baz

Evening Sir. I will try and get someone to send yours & another out tomorrow as Im currently away till Thurs. Either way they'll be yours for the weekend. ;)

[Dan]

Had a few ask best ways to secure the plate. I have no drill holes, mine are taped. When drilled they often let water in & look messy too IMO.

I use this stuff (http://cgi.ebay.co.uk/5m-DOUBLE-SIDED-FOAM-ROLL-1-/330470630294?pt=UK_Crafts_Other_Crafts_EH&hash=item4cf195a396#ht_756wt_913), works perfect, tested to 170mph, leaves no mess when taking off, Lightweight!... and costs under half the price of a Pint! :thumbs:

Only tested to 170mph Alex!? I need it to be tested to destruction if I'm going to buy on recommendation, can you pop back out and please try harder!? :hahaha: ;)

[sailorbaz]

Evening Sir. I will try and get someone to send yours & another out tomorrow as Im currently away till Thurs. Either way they'll be yours for the weekend. ;)

No worries at all mate, look forward to receiving them :thumbs: