s.mac
22-06-2010, 05:07 PM
Just giving the heads up for my old callipers that I have nearly finished re furbing
I have to replace the bleed nipples and copper piping, not a big job.
I have also got the rubber dust seals on route from the USA (just hope they are the right ones)
The callipers are 4 pots, front and rear
They are Ferrari F40 type callipers made by Rotora
I have also ordered new braided hoses front and rear as I kept the hoses for my AP install.
I am undecided if I will supply pads, I will just add the price of the pads to the for sale price, I know people prefer different pads
The kit is for standard M3 disk sizes which I ran with on my CSL, you can buy the bracket for CSL size front disks, about $200, rears are the same size as M3 so nothing needed there, they will bolt straight on.
I ran PF M3 disks front and rear and I was more than happy with the set up.
The colour is a darker yellow, as in 1st pic
2nd pic must be the light as it looks too pale
and they need a wipe down and polish as they have been sat at my mates garage for a while, took me a bit to sort the dust seals out :banghead:
http://i4.photobucket.com/albums/y107/duds001/IMG_0212.jpg
http://i4.photobucket.com/albums/y107/duds001/IMG_0209.jpg
the reason Im giving the heads up is if any one is interested on here they may want me to sort the brackets out which may take a couple of weeks, again added to the sell price.
£1,500.00 for all 4 callipers plus bits on top.
David CH mentioned an interest but I havent seen him post anywhere for ages.
This is just the heads up, anyone interested please pm me, these will not be sold until fully sorted.
Unlike the tw-t who sold me the AP's
I have to replace the bleed nipples and copper piping, not a big job.
I have also got the rubber dust seals on route from the USA (just hope they are the right ones)
The callipers are 4 pots, front and rear
They are Ferrari F40 type callipers made by Rotora
I have also ordered new braided hoses front and rear as I kept the hoses for my AP install.
I am undecided if I will supply pads, I will just add the price of the pads to the for sale price, I know people prefer different pads
The kit is for standard M3 disk sizes which I ran with on my CSL, you can buy the bracket for CSL size front disks, about $200, rears are the same size as M3 so nothing needed there, they will bolt straight on.
I ran PF M3 disks front and rear and I was more than happy with the set up.
The colour is a darker yellow, as in 1st pic
2nd pic must be the light as it looks too pale
and they need a wipe down and polish as they have been sat at my mates garage for a while, took me a bit to sort the dust seals out :banghead:
http://i4.photobucket.com/albums/y107/duds001/IMG_0212.jpg
http://i4.photobucket.com/albums/y107/duds001/IMG_0209.jpg
the reason Im giving the heads up is if any one is interested on here they may want me to sort the brackets out which may take a couple of weeks, again added to the sell price.
£1,500.00 for all 4 callipers plus bits on top.
David CH mentioned an interest but I havent seen him post anywhere for ages.
This is just the heads up, anyone interested please pm me, these will not be sold until fully sorted.
Unlike the tw-t who sold me the AP's