Check out these flaps !!!!!!!!!!....

[Yanto]

well......paddles ;)

Anyone changed theirs ?? If so any recommendations ?

Cant help but think the standard ones look a little tame..

http://cgi.ebay.co.uk/CARBON-FIBRE-SMG-F1-PADDLES-BMW-E46-M3-CSL_W0QQitemZ230458902713QQcmdZViewItemQQptZUK_Car sParts_Vehicles_CarParts_SM?hash=item35a86bc8b9

Cheers guys :thumbs:

[Bounce]

well......paddles ;)

Anyone changed theirs ?? If so any recommendations ?

Cant help but think the standard ones look a little tame..

http://cgi.ebay.co.uk/CARBON-FIBRE-SMG-F1-PADDLES-BMW-E46-M3-CSL_W0QQitemZ230458902713QQcmdZViewItemQQptZUK_Car sParts_Vehicles_CarParts_SM?hash=item35a86bc8b9

Cheers guys :thumbs:DuncanR has just changed his,took him all day,but there on.:thumbs::thumbs:There were some in the FS section.;)

[L1ARR]

I have a set of Carbon ones, they are a little longer than standard and are easier to grab. They also look good too, this would have been a good option from standard. Well worth the money in my opinion.

[Bounce]

I have a set of Carbon ones, they are a little longer than standard and are easier to grab. They also look good too, this would have been a good option from standard. Well worth the money in my opinion.I like smaller flaps to be honest.;):whistle:

[mickaldo]

well......paddles ;)

Anyone changed theirs ?? If so any recommendations ?

Cant help but think the standard ones look a little tame..

http://cgi.ebay.co.uk/CARBON-FIBRE-SMG-F1-PADDLES-BMW-E46-M3-CSL_W0QQitemZ230458902713QQcmdZViewItemQQptZUK_Car sParts_Vehicles_CarParts_SM?hash=item35a86bc8b9

Cheers guys :thumbs:
karbonkid on here sells them, i had a set of him and find they are easier to use than standard good quality and easy to fit .

[glendog74]

Come on Yanto - pay attention:

http://www.cslregister.com/forum/showthread.php?t=2160

Karbonkid = 'aceparts101' on eBay ;)

[mattCSLnut]

well......paddles ;)

Anyone changed theirs ?? If so any recommendations ?

Cant help but think the standard ones look a little tame..

http://cgi.ebay.co.uk/CARBON-FIBRE-SMG-F1-PADDLES-BMW-E46-M3-CSL_W0QQitemZ230458902713QQcmdZViewItemQQptZUK_Car sParts_Vehicles_CarParts_SM?hash=item35a86bc8b9

Cheers guys :thumbs:

My SG CSL came with these CF ones when I bought it :thumbs:. I have the standard ones as well but this is one thing I will not be removing in favour of OE :whistle: pic below

[Yanto]

DOH !!

:whistle:

[karbonkid]

At your Service. ;)

[Nords]

I have had some one for the last 10K. My std ones felt like they had ridges on, the carbon ones are lovely. Big thumbs up here...:thumbs:

[shane@mbtech]

At your Service. ;)


Do I get 50% off, I only need the right one:whistle:

[karbonkid]

Do I get 50% off, I only need the right one:whistle:

No, but I will throw the other side in for FREE! :whistle: ;)

[Yanto]

KK - YHM

Ta !

[shane@mbtech]

No, but I will throw the other side in for FREE! :whistle: ;)


You have PM, I vant, I vant:smokin:

[Dan]

DuncanR has just changed his,took him all day,but there on.:thumbs::thumbs:There were some in the FS section.;)

How hard are they to change then!? :bigcry: :bigcry:

I like smaller flaps to be honest.;):whistle:

I quite like the OEM ones too :whistle:

[Yanto]

Received - cheers KK

Very happy - just need to get the motor back from BMW now with my unplanned bill :((

[mole]

Received - cheers KK

Very happy - just need to get the motor back from BMW now with my unplanned bill :((

Or preferably without :hahaha: another bit of a p155er for you mate:bigcry:

[Yanto]

Gggrrrrrr !

[DuncanR]

Do I get 50% off, I only need the right one:whistle:

Share a set with T$ Lawsy....he only needs the left one !!:hahaha::hahaha::hahaha:

Im so clever it scares me sometimes !! lol

[DuncanR]

How hard are they to change then!? :bigcry: :bigcry:

I found 6 hours to be ample time Dan !! ... see the thread mate, all will be revealed, may save you some hag too !!



I quite like the OEM ones too :whistle:
I have a spare set going cheap in my glove box !:blalalala:


They work ok thats the main thing !

[shane@mbtech]

Share a set with T$ Lawsy....he only needs the left one !!:hahaha::hahaha::hahaha:

Im so clever it scares me sometimes !! lol


What a spiffing idea Jeeves:smokin:

We could share a set of race gloves too Duncan, half price gloves woooohoooooooooooooooooooooooooooo:hahaha::beer:

[Yanto]

New flaps attached - 10 mins and I ain't no diy'er ! Duncan - WTF were you doing matey ?? :hahaha: :hahaha:

[Nords]

As long as you have the right torx / star headed screwdriver (can't remember which it was without looking), it shouldn't take more than 3-4 mins!
:thumbs: