Calling Lawsy

[Hazy]

Your strip out mate...I only thought I had got the carpets to take out....I was so wrong! If you wanna proper strip it theres loads....

Stacks of wiring....complete loom nearside front to back
stacks of switches and control units
locks and mechanismsm etc in boot
all of the interior plastics bar the dash top
a tub of bolts,brackets and clips etc which currently weighs 4kg and counting....
the pollen filter housing (looks plastic, its steel and weighs loads!)
all wheel liners


I'm getting a bit obsessed with this weight loss thing now :hahaha: Anyone got the number for weight watchers:gayfight:

[AlexGTT]

:bigcry: Hazy, what have you done to my old smoker! It was a minter when I had her!:hahaha::thumbs:

[Hazy]

:bigcry: Hazy, what have you done to my old smoker! It was a minter when I had her!:hahaha::thumbs:

<Hazy shuffles his feet and looks down at the floor> :whistle::whistle::whistle:


joking aside it must be strange seeing the bollox ripped out of your old car mate?? I am sooooooo tempted to take the engine out and give it to John Toovey Race Engines to do his thing :hahaha:

[AlexGTT]

<Hazy shuffles his feet and looks down at the floor> :whistle::whistle::whistle:


joking aside it must be strange seeing the bollox ripped out of your old car mate?? I am sooooooo tempted to take the engine out and give it to John Toovey Race Engines to do his thing :hahaha:

Mate, just do it! I love it.:drool:

[shane@mbtech]

Thats what mine will be like Adam, currently half done now, just fitted the alcons, on ramps now ready for exhaust and suspension to go on.:thumbs:

[Curly]

Looking forward to seeing hazy-lawsy's finished motors:thumbs:

[Hazy]

Thats what mine will be like Adam, currently half done now, just fitted the alcons, on ramps now ready for exhaust and suspension to go on.:thumbs:

Wait till you try and get that tar like body sound proofing off!! its a nightmare, but I reckon 5-6kg in weight so worth it. The car may well float away if I'm not careful :hahaha::hahaha::hahaha:

[Hazy]

Looking forward to seeing hazy-lawsy's finished motors:thumbs:

last owner gave me and Radders a good base to work from:thumbs:

Whats that steel plate with the bars John, can it come out???

[Craig]

That a CSL or a normal M3?

[shane@mbtech]

That a CSL or a normal M3?

Normal M3, well it used to be normal, but its special now.:thumbs:

Looks like you have gutted it Adam,

Cage and carbon roof going in mine over christmas. All uneccessary things coming out, including all redundant wiring, just like you. You going down the route of plastic rear and side glass? Im leaving glass in mine for now.
I Love it.

[shane@mbtech]

last owner gave me and Radders a good base to work from:thumbs:

Whats that steel plate with the bars John, can it come out???


And John could peddle it too, keep it up next season.

Where did you have your little accident at oulton?

[Craig]

Ahh was going to say, my CSL didnt have any of that tar sound proofing.

[_Nathan_]

Lawsy - if you are keeping glass in the back (for remote locking and heated demisting) I've got a CSL screen you can make me an offer on, lighter than the M3 one.

[shane@mbtech]

Lawsy - if you are keeping glass in the back (for remote locking and heated demisting) I've got a CSL screen you can make me an offer on, lighter than the M3 one.


pm me a ball park, no idea what they fetch.:beer:

[Hazy]

Normal M3, well it used to be normal, but its special now.:thumbs:

Looks like you have gutted it Adam,

Cage and carbon roof going in mine over christmas. All uneccessary things coming out, including all redundant wiring, just like you. You going down the route of plastic rear and side glass? Im leaving glass in mine for now.
I Love it.

no sticking with glass, plastic puts me in the modified class, I wasnt a full on fire breathing MoFo of and engine before I go in that :supz:

And John could peddle it too, keep it up next season.

Where did you have your little accident at oulton?

yep, island, 110ish I guess :bigcry:

[_Nathan_]

In which case you should have a bidding war over my CSL rear screen ;)

Sorry Lawsy, no idea what it is worth, open to offers, collection from simpsons preferred but I can go and collect it and get it up to Birmingham for Autosport if that helps...

[Hazy]

In which case you should have a bidding war over my CSL rear screen ;)

Sorry Lawsy, no idea what it is worth, open to offers, collection from simpsons preferred but I can go and collect it and get it up to Birmingham for Autosport if that helps...


never mind that, any news on the doors??:thumbs:

[Curly]

last owner gave me and Radders a good base to work from:thumbs:

Whats that steel plate with the bars John, can it come out???

Its for balast plates when i was in the sportmaxx last year if you get in the top 3 you had to put weight on the car, dont throw it away incase they run balast in the csl cup next year

[_Nathan_]

never mind that, any news on the doors??:thumbs:

Nope, will let you know if \ when they turn up, bloke is being a pain in the c*nt to be honest...

[shimmy]

Whats that steel plate with the bars John, can it come out???


its where John used to keep his cash when in the car (liked it close and it weighed a lot) and where he used to make Queeny sit on the way to their holidays :thumbs:

[Hazy]

Nope, will let you know if \ when they turn up, bloke is being a pain in the c*nt to be honest...

Is it that German from racecarsdirect?

[_Nathan_]

It is a German guy from RaceCarsDirect yes, there are a few of them though.

Placed the order with him on 26/10 and wired a deposit over, he is being really slow, am considering writing off the deposit and going elsewhere to be honest.

[Hazy]

It is a German guy from RaceCarsDirect yes, there are a few of them though.

Placed the order with him on 26/10 and wired a deposit over, he is being really slow, am considering writing off the deposit and going elsewhere to be honest.

give him a deadline and tell him you will report him to racecardirect if he dont come up with the goods....

How much out of interest mate?

[_Nathan_]

700 euros for a pair but that doesn't include windows. Total order was just over £2k as I got a few other bits too.