View Full Version : Gear change steering mod done
shane@mbtech
29-06-2009, 12:52 AM
After bit of faffing with bracket i got my gearchange mod complete tonight:thumbs:
Those with left arm remaining it will be an easy job, as you can mount your switch in the plastic housing, but as the m track button circuitary was behing the right hand side, i had to create a switch mount, as shown in pics below.
All that is required is a little time patience, a few tools,
A pushbutton, push to make momentary switch
A suitable bracket.
I will see you at Oulton on 1st August, show you how a real one arm bandit drives:thumbs:
315
316
317
318
319
shane@mbtech
29-06-2009, 12:54 AM
320
321
322
glendog74
29-06-2009, 01:25 AM
Quality work and nice write-up :thumbs:
csl_mba
29-06-2009, 09:17 AM
That my friend is awesome :thumbs::thumbs:
Although it does give you an unfair advantage at Oulton Park :whistle:
Mark CSL
29-06-2009, 09:55 AM
Thats a great write up Lawsy keep up the good work :thumbs:
Bealo
29-06-2009, 11:09 AM
Well done mate, you made that look easy, enjoy your trackday :thumbs:
TANKSLAPPER
29-06-2009, 06:39 PM
I've done mine now
I put a push button on top of the steering wheel which does my up change. The right hand paddle is still usable to change up a gear
It works really well should of done it years ago.
http://i213.photobucket.com/albums/cc311/IAIN830/IMG_4053.jpg
Thanks lawsy,
shane@mbtech
29-06-2009, 08:44 PM
I've done mine now
I put a push button on top of the steering wheel which does my up change. The right hand paddle is still usable to change up a gear
It works really well should of done it years ago.
http://i213.photobucket.com/albums/cc311/IAIN830/IMG_4053.jpg
Thanks lawsy,#
I wish the m track button was not on the right hand side, then i could have done this.:banghead:
After driving it i may do away with the m track circuitary and mount a switch the same as yours.
I will either drive full traction on or off.
It will look neater like yours.
Have you flocked your wheel? looks good:thumbs:
Thorney
30-06-2009, 07:51 AM
Well done guys, both look like quality bits of work. We're just about to finish our version for the race csl as we've upgraded to a sparco smaller removeable wheel so have a whole new paddle arrangement.
vBulletin® v3.8.1, Copyright ©2000-2024, Jelsoft Enterprises Ltd.