PDA

View Full Version : Where to buy CSL splitters?

karbonkid
13-06-2009, 05:51 PM
Wheres the best and cheapest place to find?
Thanks in advance.
glendog74
13-06-2009, 07:01 PM
BMW... ;)
Mark CSL
13-06-2009, 07:18 PM
BMW... ;)
Seen that coming :hahaha::hahaha:
karbonkid
13-06-2009, 07:19 PM
Seen that coming :hahaha::hahaha:
So did I. :hahaha: How much £, do they come as pairs?
Mark CSL
13-06-2009, 07:38 PM
So did I. :hahaha: How much £, do they come as pairs?
Are you sitting down :whistle:
karbonkid
13-06-2009, 07:50 PM
Are you sitting down :whistle:

Go on Mark, enlighten me!
Mark CSL
13-06-2009, 07:54 PM
I am sure they are about £180 each :bigcry:
Andyk
13-06-2009, 07:54 PM
Aren't they about £220 each....I need a passenger side one but keeping eye on ebay...could be some time, especially as Dave bloody buys them all.
Mark CSL
13-06-2009, 08:05 PM
I have a mint drivers 1 :hahaha: looks like tha passanger 1 gets it all the time :whistle:

Lucky i had 2 sets
glendog74
13-06-2009, 08:08 PM
Aren't they about £220 each....

Not quite - £200. I bought one recently (£175.66 not inc VAT) ;)
Mark CSL
13-06-2009, 08:12 PM
:hahaha: I GET THE vat BACK :whistle:
glendog74
13-06-2009, 08:20 PM
:hahaha: I GET THE vat BACK :whistle:

:blalalala: :blalalala: :hahaha:
Trawler
13-06-2009, 10:06 PM
:hahaha: I GET THE vat BACK :whistle:

VAT what's that? I got a pair free from my brother in law.:hahaha:
Andyk
14-06-2009, 06:19 AM
VAT what's that? I got a pair free from my brother in law.:hahaha:

Free...thats a result Peter...is there now a CSL in the country running around with splitters missing..:whistle:
NZ_M3
14-06-2009, 06:48 AM
I have to say that some of the carbon parts on this car is just priced ridiculously ...

I have a brand new set (April/08 mould) that I'll sale and ship.
dave1
14-06-2009, 12:27 PM
i have a mint pair £300 :thumbs:
sailorbaz
14-06-2009, 01:38 PM
I would stick to OEM BMW. I have bought 2 sets off Ebay now and neither of them fit right. Have just ordered a new N/S one, should be £222 but managed to get a good discount. Taking 3 weeks to get it though!
karbonkid
14-06-2009, 01:48 PM
What do you guys do with your old ones? :whistle:
sailorbaz
14-06-2009, 01:50 PM
What do you guys do with your old ones? :whistle:

Well, I demolished mine on a nice high concrete step. No use to anyone :bigcry:
Andyk
14-06-2009, 03:13 PM
You can get them re-laquered for a small amount of pennies then stick them on ebay and as long as you can get more than the cost of getting them laquered then £ in.
karbonkid
14-06-2009, 03:24 PM
You can get them re-laquered for a small amount of pennies them stick them on ebay and as long as you can get more than the cost of getting them laquered then £ in.

Any clues Andy of who top coats them?
Andyk
14-06-2009, 09:31 PM
Any good paint shop/bodyshop should be able to do it...
thegingerninja
15-06-2009, 12:01 PM
I've had sets off ebay aswell - neither of them fitted, but I did get my money back.
karbonkid
15-06-2009, 02:20 PM
Ok. Cheers. I have sent mine away for Epoxy Top Coating only, as I prepped before hand. Just dont have the time to do myself, will be done time I get back from hols. :thumbs:
s.mac
17-06-2009, 06:05 PM
how did you prep them Alex, a bit of wet and dry ? if so did you take all the old lacquer off ?
bryce
17-06-2009, 07:05 PM
Someone on here was getting their's re-laquered but they never posted up results. Mine are in good nick, just peeling a bit.
NZ_M3
18-06-2009, 01:04 AM
I got a set of mine redone - will get some photos tonight.

You have make sure that the painter uses a good grade clear coat - otherwise it'll just crack and peel off.
Trawler
19-06-2009, 09:50 AM
Free...thats a result Peter...is there now a CSL in the country running around with splitters missing..:whistle:

Andy,sorry for the delay but I am not in the UK. There may be one in Germany but I never asked. Fee parts are not to be tyrned down.
Hazy
22-06-2009, 01:25 PM
Someone on here was getting their's re-laquered but they never posted up results. Mine are in good nick, just peeling a bit.

mine were re-finished, he took them back to the bare carbon to get the stone chips out, they were perfect, but sadly fqed again now :bigcry::bigcry::bigcry:
Andyk
22-06-2009, 08:41 PM
Andy,sorry for the delay but I am not in the UK. There may be one in Germany but I never asked. Fee parts are not to be tyrned down.


Hi Peter, good to hear from you mate. Must do a track day soon....are you still up for Goodwood at the end of the year.....show those Maserati's a thing or two.
bryce
22-06-2009, 10:21 PM
mine were re-finished, he took them back to the bare carbon to get the stone chips out, they were perfect, but sadly fqed again now :bigcry::bigcry::bigcry:

Sounds to just be a normal bodyshop job then. Do you mind what they cost Hazy? They eff'd due to stone chips or did the laquer not take?