M3 18" inside size needed

[Mark CSL]

Help needed can any 1 tell me the inside size of the 18" m3 wheel in mm please

Mark :thumbs:

[NZ_M3]

Do you mean the offset or the wheel spoke clearance??

If it's the offset then it's the following:

8JX18 ET:47 for the fronts (+47mm offset)
9JX18 ET:26 for the rears (+26mm offset)

If it's spokes clearance then you'll need to provide where you want the measurement taken relative to the centre of the wheel.

[Mark CSL]

Thanks but it is the inside diamiter of the wheel to see if it clears my brakes
i need 450mm clearance :thumbs:

[_Nathan_]

Hmmm.

Well that is 17.7 inches so I don't fancy your chances.

The 355mm 6 pot AP kit only just squeezes in there (some people have had to remove wheel balancing weights to make them fit).

[donkcsl]

bad news mark, 410mm at the front and 445mm at the back:bigcry:

[Mark CSL]

Thanks donkcsl
I tryed 1 today just too tight my brakes are too big ( now you dont here that every day :hahaha: )

Thats the 18" wheels and slicks out the window :banghead:

[Nords]

My 18" go over my APs without a drama, however I haven't changed the tyres since they arrived, hence someone could have put the weights on carefully...