New Cups n Supersprint !

[DazBlackCSL]

Sun's out .. Car currently on ramps and new cups and SS are in the process of going on ... Hmmm :drool: the drive home in a few hours !!:whistle:

[glendog74]

Pics! Shortly followed by a video for the noise! :drool:

[jibm]

nice have a good drive home:thumbs: im still thinking 100 cell cats and re-map :whistle:

[DazBlackCSL]

Cheeky update ..:whistle: still at thorneys but now has stage 2 re-map to enjoy on the home run :drool:

Will do pics over weekend and vid as soon as I can ... SS Race Box ..100 cell cats and miltec front pipe resonated.. Need to scrub cups in now !!!!!

[SMD]

Looking forward to pics and defo a video!:smokin::supz:

[Radders]

i need a supersprint!!! :bigcry:

[bryce]

:supz: Sounds sweet!

(Get the new KW settings up too bud)

[DazBlackCSL]

Awesome !!!!!!!!!!!!!!!!!!

Just got home , and its just right sounds more race car like , but not too much as I can still here the induction roar , its mental on the blip down even louder :hahaha: its the dogs

Not going to be on-line for a while as im running late , pub is calling :beer::hahaha:

But very impressed with SS set up and the Stage 2 it just pulls harder and feels smoother ....

Vids over weekend hopefully .. Pics tomorrow PM sometime , wont be clean as its minging !!
:smt047:smt047:smt047:smt047:smt047:smt047

[SMD]

Look forward to it Daz!:thumbs:

Maybe somthing i will go for some time!:smt047

[Radders]

Get that video up

[DazBlackCSL]

Get that video up

Will do ASAP ;)

[DazBlackCSL]

:supz: Sounds sweet!

(Get the new KW settings up too bud)

Do that tom as well sorry got carried away with the toys today :hahaha:

[Bealo]

Looking forward to seeing the pic's and the vid's :thumbs:

[DazBlackCSL]

Ok a few pics, as Im off out to take the tops off the cups for a few hours at least in this weather :whistle: cant be a**** to clean it !!

Will do Vids over the weekend if time or early next week...hmmm pipes :hahaha:

http://i301.photobucket.com/albums/nn67/dazzam3_photo/DSC01853.jpghttp://i301.photobucket.com/albums/nn67/dazzam3_photo/DSC01854.jpghttp://i301.photobucket.com/albums/nn67/dazzam3_photo/DSC01855.jpghttp://i301.photobucket.com/albums/nn67/dazzam3_photo/DSC01856.jpg

[SMD]

Looking good Daz have fun!:beer:

[bryce]

They look sexy as fook, just the size and shape I like :smt055

You ever dyno'd you car Daz? Be good to see what its running now with S2 + SS.

[Windowlicker]

No doubt she sounds rude, but whats with " i have just slid some stainless exhauust trims over my pipes " look , could they not have finished them properly , removing the gap all round the base.
That looks a bit after thought ish.Surprised to see tthat to be honest.
Other than that, she looks quite rude.

[SMD]

No doubt she sounds rude, but whats with " i have just slid some stainless exhauust trims over my pipes " look , could they not have finished them properly , removing the gap all round the base.
That looks a bit after thought ish.Surprised to see tthat to be honest.
Other than that, she looks quite rude.


Yes i also dont like that look!:bigcry:

[glendog74]

could they not have finished them properly , removing the gap all round the base.

Yes i also dont like that look!:bigcry:

I think that you're missing the point fellas...

The back box that Daz has fitted is Supersprint's racing lightweight box and it's just a tad lighter than OEM and indeed their own CSL racing back box. If you compare it to Supersprint's other design you will see what i mean - minimalist approach - no uneccessary metal! :whistle:

http://img3.imageshack.us/img3/6271/044006webimage.jpg http://img3.imageshack.us/img3/4868/043926webimage.jpg

[SMD]

So Daz has the left box fitted (the loud one)?

[DazBlackCSL]

Yeah thats the one rob, on the left, was actually very light when I picked up the whole lot compared to the OEM one.

Think it got a little nosier this afternoon :whistle: .. did give it a bloody good spanking today tho ... not sure what is running at , but it is quicker without question just pulls a lot harder than before:smokin:

Will get the vids up tom PM if I can get someone out with me to take it ... as it sounds the nuts, to be honest the pipes just look a bit more purposeful IMHO and you dont really notice the inners at warp speed !! :smt047:smt047

Some more from this arvo ...

http://i301.photobucket.com/albums/nn67/dazzam3_photo/DSC01864.jpg
http://i301.photobucket.com/albums/nn67/dazzam3_photo/DSC01860.jpg
http://i301.photobucket.com/albums/nn67/dazzam3_photo/DSC01859.jpg

[glendog74]

Looks cool mate, i'm seriously thinking to go SS now - love the camber on the fronts too! ;)

[Windowlicker]

I think that you're missing the point fellas...

The back box that Daz has fitted is Supersprint's racing lightweight box and it's just a tad lighter than OEM and indeed their own CSL racing back box. If you compare it to Supersprint's other design you will see what i mean - minimalist approach - no uneccessary metal! :whistle:

http://img3.imageshack.us/img3/6271/044006webimage.jpg http://img3.imageshack.us/img3/4868/043926webimage.jpg

If its a minimalist race unit with no extra fat.....why have trims on it at all, why are'nt the exits from the backbox just that, 80mm round stainless tubes exiting the cylindrical chamber, they dont need conical inners that dont fit properly to be there at all.
Just a bit surprised like i say, a bit half finished in my opinion.

[houlbt]

Looks good Daz... glad you're pleased with it. I've had this exhaust (the race one on the left) on my car for a couple of years now.

What's interesting though is that my pipes don't have that twin rim look to each exit pipe like yours seem to have . I'm at a loss as to why that is and figure they must have altered the build process somehow.

As Daz says it is considerably lighter than an OEM exhaust (and also their other spec road version) but there is no doubt that it was still designed with the road driving public in mind if only by virtue of the fact it has 4 exit pipes.

A true race spec exhaust (say like the one BMsport has made for E46 racers) needs only a single silencer ... i.e. it's missing the extension and silencer box for the right hand side as you look at the rear of your car. Trouble is though I don't think many road going CSL/M3 drivers would like that look

[houlbt]

I'm getting my car measured up for a new exhaust by the guy that makes our race ones... as and when I do I might sell my SS - will put it on here if I do.

Might take a little while to get around to it but I'd wait and see what the replacement look like on my car before you rush off and buy a new Supersprint (if you're that patient)

[glendog74]

Cool :thumbs:

[Jay55]

http://i301.photobucket.com/albums/nn67/dazzam3_photo/DSC01864.jpg
http://i301.photobucket.com/albums/nn67/dazzam3_photo/DSC01860.jpg
http://i301.photobucket.com/albums/nn67/dazzam3_photo/DSC01859.jpg
Daz I sure hope you clean the car before i turn up next week:blalalala:

[SMD]

Got to say Daz, one of the best looking on here with the wheels ride height etc!:smokin:

Look forward to the pics after Jay has worked his magic!:thumbs:


But then again it is Black.........:smt063

[Bealo]

By looking at how small the rear box is i bet it'd bloody loud :thumbs:

[DazBlackCSL]

Daz I sure hope you clean the car before i turn up next week:blalalala:

I cleaned it tonight just before I hit the pub !! managed to squeeze a cheeky one in :smt047:smt045

[DazBlackCSL]

By looking at how small the rear box is i bet it'd bloody loud :thumbs:

Its a little loud yes !! But then its a CSL after never a car for the shy or quiet ones !!!!!! :hahaha:

[DazBlackCSL]

If its a minimalist race unit with no extra fat.....why have trims on it at all, why are'nt the exits from the backbox just that, 80mm round stainless tubes exiting the cylindrical chamber, they dont need conical inners that dont fit properly to be there at all.
Just a bit surprised like i say, a bit half finished in my opinion.

Alright Alright !!! :smt044 :whistle:

[houlbt]

So I had a look at my backbox today... it is the same as Daz's in so much as there is an inner sleeve to the rear pipes. Not that you can see it once they've done a few miles. Will post a few pics of my poor old shed up later.

[_Nathan_]

Looks good Daz... glad you're pleased with it. I've had this exhaust (the race one on the left) on my car for a couple of years now.

What's interesting though is that my pipes don't have that twin rim look to each exit pipe like yours seem to have . I'm at a loss as to why that is and figure they must have altered the build process somehow.

As Daz says it is considerably lighter than an OEM exhaust (and also their other spec road version) but there is no doubt that it was still designed with the road driving public in mind if only by virtue of the fact it has 4 exit pipes.

A true race spec exhaust (say like the one BMsport has made for E46 racers) needs only a single silencer ... i.e. it's missing the extension and silencer box for the right hand side as you look at the rear of your car. Trouble is though I don't think many road going CSL/M3 drivers would like that look

Is the BMSport race exhaust OK for trackdays or is it too loud? Assume it allows plenty of space for a proper diffuser - idea on the weight? Any pics?

[2bar boost]

Its a little loud yes !! But then its a CSL after never a car for the shy or quiet ones !!!!!! :hahaha:

Nice to see a car dirty!! Definately on the list of things to do before summer, more noise :drool:

Loving the Rays too :thumbs:

[houlbt]

Is the BMSport race exhaust OK for trackdays or is it too loud? Assume it allows plenty of space for a proper diffuser - idea on the weight? Any pics?

Suspect it will be touch and go for trackdays but certainly no more so than the Supersprint Race. We were talking about options for this today with the fabricator.

It runs straight back yes so allows good space for a proper diffuser and weighs in at less than any aftermkt solution currently on the mkt. I can also get it made in titanium like I have on my race car if that floats your boat.

[_Nathan_]

Can you please keep me informed on developments. Does it go from cat back or centre pipe back?

[rstoughy]

Daz,

Any idea how this back box will fair on the noise checks at track days?

Really like the look of that and if it does something for the performance then its a winner all round.

Only concern i have is that it would fail the checks at a track.

My next one is Croft @ 98db strict

BTW
car looks stunning :smokin: they just look so good dirty :thumbs:

[AlexGTT]

Just for interest, std back box weight is 25kgs.:bigcry: SS lightweight race back box is 10kgs, weighed with wrapping/packaging, so saves at least 15kg's. That's the reason I have one. :smokin: Noise is very nice in combination with silenced SS centre section, which I'm currently running. Fairly sure most trackdays wouldn't be a problem with mine.

I found it not to my taste with 100 cell cats though but I'm sure some would love it.

[Bealo]

Is everyone anti Miltek all of a sudden???

I hope when i get to see and hear a SS that i will NEED to change from the Milltek :thumbs:

At the minute i'm happy with the Miltek..

[DazBlackCSL]

Boys , Will do the Vids for sound this week :thumbs:

[DazBlackCSL]

Daz,

Any idea how this back box will fair on the noise checks at track days?

Really like the look of that and if it does something for the performance then its a winner all round.

Only concern i have is that it would fail the checks at a track.

My next one is Croft @ 98db strict

BTW
car looks stunning :smokin: they just look so good dirty :thumbs:

Cheers Mate , think it should be OK as its the same set up as thorneys actual road car, which was ok for track days, as Alex says with the silenced SS centre section then its not as lairy, its just the right level of more race / rasp sound to it / but still with the induction roar not too in your face or embarrassing for day to day !!

[DazBlackCSL]

Is everyone anti Miltek all of a sudden???

I hope when i get to see and hear a SS that i will NEED to change from the Milltek :thumbs:

At the minute i'm happy with the Miltek..

Im running Miltek front section ;)

[houlbt]

one CSL video clip with Supersprint Race exhaust....

http://www.youtube.com/watch?v=cF3eoWVdCwo

:whistle:

[DazBlackCSL]

one CSL video clip with Supersprint Race exhaust....

http://www.youtube.com/watch?v=cF3eoWVdCwo

:whistle:


Thats the one houlbt :whistle::smt055

[Radders]

Just for interest, std back box weight is 25kgs.:bigcry: SS lightweight race back box is 10kgs, weighed with wrapping/packaging, so saves at least 15kg's. That's the reason I have one. :smokin: Noise is very nice in combination with silenced SS centre section, which I'm currently running. Fairly sure most trackdays wouldn't be a problem with mine.

I found it not to my taste with 100 cell cats though but I'm sure some would love it.

was it much louder with the cell cats?

i am thinking the miltek could be my best option.

[AlexGTT]

Well, it was too loud for me but most of my friends said they would have kept them on. I'm kind of fussy, so took them off.

Maybe if you don't like it too loud the other SS or Milltek backbox might be the better option.

[Bealo]

Here are a couple of vid's of mine.

http://i165.photobucket.com/albums/u54/Bealo1/th_MOV01010.jpg (http://s165.photobucket.com/albums/u54/Bealo1/?action=view&current=MOV01010.flv)

[Bealo]

http://i165.photobucket.com/albums/u54/Bealo1/th_MOV01007.jpg (http://s165.photobucket.com/albums/u54/Bealo1/?action=view&current=MOV01007.flv)

[Bealo]

Not sure why it put the clip on the post TWICE???

Any ideas??

[SMD]

Looking and sounding good Bealo!:supz:

[Bealo]

Looking and sounding good Bealo!:supz:





Thanks but it sounds quite compared with the SS CSL of Houlbt