Carbon splitters

[StevenCSL]

Hi guys,

I want new carbon splitters, but with the BMW dealer, they cost me 240 euro and that is toooo much !

Where can I buy (cheaper) replicas that fit 100% on an original CSL bumper ?

Thx !

[NZ_M3]

PM dave1 - he usually has a couple of used sets for sale.

It's not hard to reclear the used ones and have them looking brand spanking new if yours aren't damaged.

Alternatively contact Paul from Oceans Plymouth BMW - he can get really good prices on the carbon splitters - I just purchased a new set from them for bugger all money.

Paul Eccles
Parts Supervisor

Ocean Plymouth
St Modwen House
Longbridge Road
Marsh Mills
Plymouth
Devon
PL6 8LD
United Kingdom

Tel: +44 (0) 1752 202828
Fax: +44 (0) 1752 204455
e-mail: paul.eccles@oceanplymouth.bmw-net.co.uk (wlmailhtml:{40FFCB29-DC55-4FA6-B192-4911541FA033}mid://00000025/!x-usc:mailto:paul.eccles@oceanplymouth.bmw-net.co.uk)
URL: http://www.oceanbmw.com/ (wlmailhtml:{40FFCB29-DC55-4FA6-B192-4911541FA033}mid://00000025/!x-usc:http://www.oceanbmw.com/)

[Andyk]

Doyou have to buy the pair or can you buy singles.

[NZ_M3]

You can buy singles brand new from BMW - separate part numbers for left and right.

[Andyk]

[quote=NZ_M3;17615]You can buy singles brand new from

:thumbs:

[sailorbaz]

Alternatively contact Paul from Oceans Plymouth BMW - he can get really good prices on the carbon splitters - I just purchased a new set from them for bugger all money.

Paul Eccles
Parts Supervisor

Ocean Plymouth
St Modwen House
Longbridge Road
Marsh Mills
Plymouth
Devon
PL6 8LD
United Kingdom

Tel: +44 (0) 1752 202828
Fax: +44 (0) 1752 204455
e-mail: paul.eccles@oceanplymouth.bmw-net.co.uk (wlmailhtml:{40FFCB29-DC55-4FA6-B192-4911541FA033}mid://00000025/!x-usc:mailto:paul.eccles@oceanplymouth.bmw-net.co.uk)
URL: http://www.oceanbmw.com/ (wlmailhtml:{40FFCB29-DC55-4FA6-B192-4911541FA033}mid://00000025/!x-usc:http://www.oceanbmw.com/)

You didn't happen to land those ones that were on ebay for like FIVE minutes or so??? They were on for £99 as a starting bid but were off the next morning...

[NZ_M3]

You didn't happen to land those ones that were on ebay for like FIVE minutes or so??? They were on for £99 as a starting bid but were off the next morning...


Guilty as charged ....

[glendog74]

You didn't happen to land those ones that were on ebay for like FIVE minutes or so??? They were on for £99 as a starting bid but were off the next morning...

I saw them and was most unamused when they disappeared before the auction ended! I even sent a message to the parts guy to ask about them and he simply said that they weren't for sale anymore... :smt104

[NZ_M3]

I saw them and was most unamused when they disappeared before the auction ended! I even sent a message to the parts guy to ask about them and he simply said that they weren't for sale anymore... :smt104

Hmmmm are we talking about the same item here?? Because the one I bought was done via a buy it now button ....

[glendog74]

Dunno mate! I didn't see a 'Buy It Now' on the listing but i was probably half asleep! Glad you got a good deal though ;)

[2bar boost]

A company local to me were selling the splitters on the bay for £99

www.mstyle.co.uk (http://www.mstyle.co.uk) a bit of discount over their site £119 obviously reps but may be worth a trip down to check out the quality ;)

[sailorbaz]

2bar, I had a wee look on MStyle there for the splitters to fit our bumper and can't find them...wee link for the stupid boy??? :'(

Found the bumper though, not bad at 3 hundred and odd quid incudling corner splitters!

[mole]

Do you mean the ones at the bottom of this page?
http://www.bmwmstyle.co.uk/acatalog/Online_Catalogue_Front_Bumpers__Spoilers_and_Split ters_235.html

Can't be certain but I think they are stick on jobbys for the normal M3 bumper - unless you know otherwise 2bar? :bigcry:

Rich

[Andyk]

PM dave1 - he usually has a couple of used sets for sale.

It's not hard to reclear the used ones and have them looking brand spanking new if yours aren't damaged.

Alternatively contact Paul from Oceans Plymouth BMW - he can get really good prices on the carbon splitters - I just purchased a new set from them for bugger all money.

Paul Eccles
Parts Supervisor

Ocean Plymouth
St Modwen House
Longbridge Road
Marsh Mills
Plymouth
Devon
PL6 8LD
United Kingdom

Tel: +44 (0) 1752 202828
Fax: +44 (0) 1752 204455
e-mail: paul.eccles@oceanplymouth.bmw-net.co.uk (wlmailhtml:{40FFCB29-DC55-4FA6-B192-4911541FA033}mid://00000025/!x-usc:mailto:paul.eccles@oceanplymouth.bmw-net.co.uk)
URL: http://www.oceanbmw.com/ (wlmailhtml:{40FFCB29-DC55-4FA6-B192-4911541FA033}mid://00000025/!x-usc:http://www.oceanbmw.com/)


Just wanted to pass on the email I've had from Paul at Ocean BMW, regarding the splitters. He must have had a few people contact........

Hi Andy,

I wish that I could get more and offer them at a special price.

The set that we had were a cancelled order. I can get more but on a special order basis at £200.00 per side carriage free. If this is of interest could you contact me with your chassis number for verification.

Could you do me a favour and explain this on the CSL forum.

Thank you,

Regards,

Paul

[glendog74]

£200?! That'll be the normal going rate for 1 splitter then... Thanks for that parts man :smt120... I'm still waiting for my 'special order' NSF splitter to arrive - a month since ordering (which i know is only the start of a long wait...) :banghead:

Maybe we should all independently go into our local stealers this week and order a set - only to cancel and then pick them up cheap on fleabay the next day! :whistle:

[NZ_M3]

Maybe we should all independently go into our local stealers this week and order a set - only to cancel and then pick them up cheap on fleabay the next day! :whistle:


:hahaha::hahaha::hahaha::hahaha::hahaha:

[StevenCSL]

Hi guys, I wrote a lot of emails to different sellers of such carbon splitters, BUT they are all for the normal M3 front bumper, NOT for an original CSL one ???

So I think I have to order a new one at my BMW dealer for 200GBP... :bigcry:

Anyone knows a firm who sells original CSL splitters ? Or someone with second hands ? Bur original CSL !

Thx !!!

[2bar boost]

2bar, I had a wee look on MStyle there for the splitters to fit our bumper and can't find them...wee link for the stupid boy??? :'(

Found the bumper though, not bad at 3 hundred and odd quid incudling corner splitters! Still on ebay but on closer reading they dont fit CSL :hahaha:

Do you mean the ones at the bottom of this page?
http://www.bmwmstyle.co.uk/acatalog/Online_Catalogue_Front_Bumpers__Spoilers_and_Split ters_235.html

Can't be certain but I think they are stick on jobbys for the normal M3 bumper - unless you know otherwise 2bar? :bigcry:

Rich Poxy inferior copies:birdman: :hahaha:

Hi guys, I wrote a lot of emails to different sellers of such carbon splitters, BUT they are all for the normal M3 front bumper, NOT for an original CSL one ???

So I think I have to order a new one at my BMW dealer for 200GBP... :bigcry:

Anyone knows a firm who sells original CSL splitters ? Or someone with second hands ? Bur original CSL !

Thx !!!
BMW it is then :ANAL:

Would anyone be interested in splitters if they were excuse the pun Carbon copies as it maybe a possibilty! I will send an email to find out costings involved etc

[s.mac]

http://www.pistonheads.com/sales/957788.htm

;)

[E46ACS]

They are cheap!!!

I know the seller as well. He had that E30 M3 Jagermeister with the V8 engine. :drool:

[s.mac]

They are cheap!!!


I was tempted Tim, there's nothing wrong with mine so it seemed a waste. If someone buys them from here they could possibly donate their old set for a short period of time so 2Bar Boost can get a copy made up ;)

[StevenCSL]

http://www.pistonheads.com/sales/957788.htm

;)

Thx mate, I bought them :thumbs:

[s.mac]

Thats the good thing about forums ;)

[2bar boost]

I was tempted Tim, there's nothing wrong with mine so it seemed a waste. If someone buys them from here they could possibly donate their old set for a short period of time so 2Bar Boost can get a copy made up ;)

Fantastic idea if anyones up for it!!

I have been told that it will take approximately 4weeks to have the sample made ready for the first shipment ;)

[sailorbaz]

note so self, Bastid!!! Need to check forums even more often that I am at the moment, it was driving herself mental but now I am back onboard my boat (That sounds so rich and exciting eh?)